Atel Antennas

The Galileo 380-430 MHz GPS GNSS TETRA antenna combines a TETRA radio section and a section dedicated to GPS, GNSS, and Galileo satellite reception in a single product. Atel-Antennas offers a mobile solution designed to integrate omnidirectional communication and positioning, with a compact structure and specific components for both functions.

The TETRA section operates in the 380-430 MHz range with an impedance of 50 Ohm, a maximum power of 10 W, a V.S.W.R. less than 2, vertical polarization, and omnidirectional emission. The declared gain is 2.14 dBi, with 150 ± 20 mm RG316 cable and a male FME connector.

The Galileo GPS GNSS section uses an active planar patch antenna with a center frequency of 1580 MHz, a bandwidth of ± 28 MHz, a V.S.W.R. less than 2.0, impedance of 50 Ohm and RHCP polarization. Also indicated are a supply voltage of 2.7 to 5.1 V, consumption of 10 plus or minus 1 mA at 2.7 V and 16 plus or minus 1 mA at 5.0 V, amplifier gain of 18 plus or minus 1 dB at 2.7 V and 22 plus or minus 1 dB at 5.0 V, patch antenna gain of 2 dB, noise figure of 1.7 plus or minus 2.1 dB, RG 174 cable of 180 plus or minus 10 mm and a male SMA connector.

From a construction point of view, Atel-Antennas makes the product with a Polyamide6 cap, AmitelEM400 gasket and Pibiflex 2564 rod, in black. The base dimensions are 95 x 52 mm, the net weight is 230 g, while the mounting requires a 15 x 15 mm square hole or a 19 mm diameter round hole. The declared operating temperature is between -30 °C and +80 °C.

• Mobile antenna with TETRA section and Galileo GPS GNSS.
• TETRA frequency range 380-430 MHz.
• Galileo active planar patch GPS GNSS antenna.
• Central frequency of the satellite section 1580 MHz.
• TETRA gain of 2.14 dBi.
• Omnidirectional emission and vertical polarization for the TETRA section.
• RHCP polarization for the Galileo GPS GNSS section.
• Male FME connector for TETRA and male SMA connector for Galileo GPS GNSS.
• Operating temperature range: -30°C to +80°C.
• Base: 95 x 52 mm and net weight: 230 g.

The Atel Antennas mobile antenna integrates three systems in a single device: a VHF 130-230MHz antenna in 1/4 configuration and a UHF 380-500MHz antenna in 5/8, plus an active GPS GNSS/Galileo module with RHCP polarization on 1580MHz. With 50? impedance, it supports power up to 50W on the radio bands and has a gain of 2.14dBi for VHF/UHF, with VSWR <2.2.

The GPS GNSS module is powered at 2.7-5V with a gain of 18dB (2.7V) or 22dB (5V), a noise figure of 1.7-2.1dB and a VSWR <2.0. The antenna features a 500mm Pibiflex rod, polyamide cap and Arnitel EM400 gasket. It comes with RG 316 cable (150mm) with male FME connector and RG 174 extension (5m) with female/male SMA connectors.

The base measures 95 x 52mm, with mounting on a 15x15mm square hole or Ø19mm round hole, weighs 180g and resists from -30°C to +80°C. Compact and versatile, it is ideal for vehicle installations requiring integrated radio communications and GPS tracking.

• Bands: VHF 130-230MHz (1/4), UHF 380-500MHz (5/8), GPS GNSS/Galileo 1580±28MHz
• Impedance: 50?
• Power: 50W (peak VHF/UHF)
• Gain: V/UHF 2.14dBi; Amplified GPS 18dB @2.7V / 22dB @5V
• GPS noise figure: 1.7-2.1dB
• Polarization: vertical (V/UHF), RHCP (GPS)
• VSWR: <2.2 for V/UHF, <2.0 for GPS
• Rod: Pibiflex 2564, length 500mm
• Materials: polyamide cap, Arnitel EM400 gasket
• Cables and connectors: RG 316 150mm FME M, RG 174 5m SMA F/M extension cable
• Base: 95 x 52mm, 15x15mm or Ø19mm holes
• Weight: 180g
• Operating temperature: -30°C à· +80°C

The T-AT960.10-BU VHF GPS/GNSS/Galileo combination antenna from Atel-Antennas is an integrated solution for mobile applications requiring VHF and UHF radio communications along with GPS, GNSS, and Galileo satellite reception. It integrates a 1/4-wave antenna for VHF, a 5/8-wave antenna for UHF, and an Active Planar Patch for the GPS section.

The VHF band covers 130 - 230 MHz with 50 Ohm impedance, omnidirectional emission, and vertical polarization. The GPS section operates at 1580 MHz with a bandwidth of 28 MHz above and 28 MHz below the center frequency, V.S.W.R. less than 2.0 and RHCP polarization. Main Features

• VHF Band: 130 - 230 MHz
• GPS Center Frequency: 1580 MHz
• GPS Bandwidth: 28 MHz above and 28 MHz below the center frequency
• GPS Antenna: Active Planar Patch Type
• Impedance: 50 Ohm
• Maximum Power: 50 W Peak
• V.S.W.R. Less than 2.2 VHF and less than 2.0 GPS
• VHF Vertical Polarization and RHCP GPS
• Gain 2.14 dBi
• GPS Patch Gain 2 dB
• Whisker Length 500 mm
• VHF Cable RG 316 mm 150 mm
• VHF FME Connector m
• GPS Cable RG 174 mm 180 mm
• GPS Connector SMA m
• Operating Temperature -30°C to +80°C

The T-AT960.10 mobile antenna from Atel Antennas combines three technologies in a single compact device: VHF (130-230MHz) and UHF (380-500MHz) in mobile configuration (1/4 for VHF, 5/8 for UHF), as well as an active module for GPS GNSS/Galileo with RHCP polarization, centered on 1580MHz. With a standard impedance of 50? and a maximum power of 50W, it offers a gain of 2.14dBi for the V/UHF bands and an amplified gain of 18dB (at 2.7V) or 22dB (at 5V), with noise of only 1.7-2.1 dB.

Made of robust materials (polyamide cap, ArnitelEM400 gasket, Pibiflex shaft), it has a 150mm RG-316 cable with male FME connector, plus a 5m RG-174 extension cable with male/female SMA connector. Operational from -30°C to +80°C, it mounts in 15x15mm square holes or Ø19mm round holes. Compact and lightweight (180g), it is perfect for vehicles requiring integrated radio communication and GPS positioning.

• VHF 130-230MHz (1/4) and UHF 380-500MHz (5/8) bands
• Impedance: 50?
• Maximum power: 50W (peak V/UHF)
• V/UHF gain: 2.14dBi
• GPS GNSS/Galileo active module: center frequency 1580MHz, amplifier gain 18dB (2.7V) or 22dB (5V), noise figure 1.7-2.1dB
• GPS polarization: RHCP, V/UHF vertical, omnidirectional emission
• Cables and connectors: RG 316 150mm FMEm + RG 174 5m SMAF/SMAM extension cable
• Materials: polyamide cap, ArnitelEM400 gasket, Pibiflex rod
• Operating temperature: -30°C à· +80°C
• Mounting dimensions: 15x15mm square hole or Ø19mm round hole
• Weight: 180g
• VSWR: < 2.2 (V/UHF), < 2.0 (GPS)

The Atel-Antennas T-AT968.03 antenna is designed for vehicular and mobile applications requiring simultaneous connectivity on multiple bands. It supports GSM, UMTS, TETRA, and GPS/GNSS/Galileo systems, ensuring stable signal and high performance. The stainless steel construction with polyamide cap and Arnitel gasket ensures robustness and resistance over a temperature range of -30°C to +80°C.

The TETRA section (380-410 MHz) uses a 5/8 ? antenna with 5 dBi gain, while the GSM/UMTS sections offer omnidirectional emission with 2.14 dBi gain. The GPS/GNSS/Galileo module integrates an active antenna with up to 22 dB gain and low noise (1.7-2.1 dB), ideal for precise location. The antenna is equipped with SMA and FME connectors and RG174 and RG58 cables, which allow a versatile connection to routers, modems or professional radio systems.

• Support GSM 824-960 MHz, DCS/PCN 1710-1880 MHz, UMTS 1900-2170 MHz
• Active GPS/GNSS/Galileo module at 1580 MHz with gain up to 22 dB
• TETRA band 380-410 MHz with gain of 5 dBi
• Omnidirectional emission and vertical polarization
• Stainless steel structure with polyamide 6 cap
• SMA connectors m. and FME m., RG174 and RG58 cables (6 m)
• Operating temperature -30 °C to +80 °C
• Maximum power 10 W, impedance 50 Ohm

The Atel-Antennas UHF collinear mobile antenna operates in the 435-470MHz band with a high power of 100W and a gain of 5dBi, offering omnidirectional emission and vertical polarization. Standard 50? impedance and VSWR less than 2.0 ensure optimal performance for professional radio applications on vehicles.

Made with high-quality materials such as a self-extinguishing Moplen cap, 60 Shore Kraton G7720 gasket and AISI302 stainless steel rod, the antenna is designed to withstand extreme conditions between -40°C and +80°C. The 4500mm RG-58 coaxial cable (100pF/m) ensures high reliability. Weighing 400g, with a 515mm pole and a 43mm diameter base for a height of 40mm, it can be mounted on a Ø24mm hole, offering a robust and high-performance solution for professional vehicular installations.

• UHF band 435-470MHz, mobile collinear antenna
• Impedance: 50?
• Max power: 100W
• Gain: 5dBi
• Vertical polarization, omnidirectional emission
• Cable: RG 58, length 4500mm, capacitance 100pF/m
• Materials: self-extinguishing Moplen cap, Kraton G7720 gasket, AISI302 stainless steel pole
• Operating temperature: -40°C à· +80°C
• Shaft dimensions: 515mm; base Ø43mm, height 40mm
• Weight: 400g
• Mounting hole: Ø24mm
• VSWR < 2.0

The Atel-Antennas VHF mobile antenna covers the 140-174MHz band with a 1/4 mobile design, perfect for automotive installation. It offers standard 50? impedance, power up to 50W, and a gain of 2.14dBi, ensuring high signal quality with omnidirectional emission and vertical polarization. The robust AISI302 stainless steel body, combined with resistant components such as the self-extinguishing Moplen cap and Kraton gasket, ensures durability and reliability even in extreme environmental conditions from -40°C to +80°C.

The antenna uses a 4500mm RG-58 coaxial cable with a capacitance of 100pF/m and is equipped with a cutting diagram to adapt the tube length based on the operating frequency, maintaining a VSWR of less than 2.0. Dimensions: base diameter 43mm, base height 40mm, rod 500mm, weight 350g. Mounting hole Ø24mm. Ideal for radio amateurs and professionals who need a versatile and high-performance VHF mobile solution.

• Frequency: 140-174MHz (VHF band)
• Type: 1/4 mobile
• Impedance: 50?
• Maximum power: 50W
• Gain: 2.14dBi
• Polarization: vertical, omnidirectional emission
• Cable: RG 58, 4500mm, 100pF/m
• Materials: AISI302 stainless steel, self-extinguishing Moplen cap, Kraton G7720 gasket
• Operating temperature: -40°C à· +80°C
• Dimensions: 500mm mast; Base Ø43mm, h40mm
• Weight: 350g
• Mounting hole: Ø24mm
• VSWR < 2.0 with frequency cutoff

The T-AV005 is a 5/8"" VHF mobile antenna designed for mobile applications in the 49-88 MHz and 144-174 MHz bands. It features 50 Ohm impedance, 100 W maximum power, and a V.S.W.R. of less than 1.5, ensuring reliable performance in mobile communications.

Manufactured by Atel-Antennas, it features vertical polarization and omnidirectional emission. The gain is 7 dBi in the 144-174 MHz band and 5 dBi in the 49-88 MHz band. The supplied cable is RG58, 5000 mm long.

The structure includes a white chrome-plated stainless steel spring and a fiberglass whip with black polyurethane coating. The net weight is 650 g, and the total whip length is 1350 mm. The operating temperature ranges from -40 to +80 degrees Celsius. The mounting connection is M6x1, with a 24 mm mounting hole. The base is 40 mm high and 43 mm in diameter.

Main Features

• Antenna Type 5/8 1 Mobile Antenna
• Frequency 49 - 88 MHz and 144 - 174 MHz
• Impedance 50 Ohm
• Maximum Power 100 W
• V.S.W.R. less than 1.5
• Vertical polarization
• Omnidirectional emission
• Gain 7 dBi 144 - 174 MHz 5 dBi 49 - 88 MHz
• RG58 cable 5000 mm
• Net weight 650 g
• Wheel length 1350 mm
• Mounting connection M6x1
• Mounting hole 24 mm
• Base height 40 mm, diameter 43 mm

The VHF mobile antenna is designed for mobile applications in the 62-300 MHz band, ensuring omnidirectional coverage and vertical polarization for stable in-vehicle communications. It supports a maximum power of 100 W with 50 Ohm impedance and 0 dB gain over a quarter wavelength.

Manufactured by Atel-Antennas, it features a white chrome-plated stainless steel spring and an AISI302 stainless steel whip, with a total length of 1285 mm. It comes with 5000 mm RG58 cable, an M6x1 mounting connection, and a 24 mm diameter mounting hole. The structure is designed to operate in a temperature range of -40°C to +80°C.

Main Features

• Mobile Antenna Type
• Frequency Range 62-300 MHz
• Impedance 50 Ohm
• Maximum Power 100 W
• Vertical Polarization
• Omnidirectional Emission
• Gain 0 dB quarter-wave reference
• Overall Whip Length 1285 mm
• RG58 Cable Length 5000 mm
• Mounting Connection M6x1
• Mounting Hole Diameter 24 mm
• Operating Temperature -40°C to +80°C C

The Atel Antennas low-profile UHF antenna is designed to operate in the 400-470MHz band, with a gain of 2.14dBi (1/4), a maximum power of 200W, and a 50? impedance. Vertical polarization and a VSWR of less than 1.5 ensure reliable and stable performance even in demanding radio environments.

The compact and robust design, with a diameter of 106mm and a height of only 160mm, makes it suitable for installations where a discreet yet durable antenna is required. Made with an ENAW 6082 aluminum alloy base and a polycarbonate radome, it includes ground protection for lightning protection. The N-female connector facilitates integration into professional systems. Operating between -40°C and +80°C, it represents an ideal solution for outdoor UHF applications where compactness and robustness are essential.

• UHF Band: 400-470MHz
• Impedance: 50?
• Gain: 2.14dBi (1/4)
• Maximum Power: 200W
• Polarization: Vertical, omnidirectional emission
• VSWR: <1.5
• Connector: N-female
• Protection: DC lightning grounding
• Materials: ENAW-6082 aluminum base, polycarbonate radome
• Dimensions: Ø106mm x 160mm
• Weight: 1000g
• Operating temperature: -40°C à· +80°C

The Atel Antennas two-way coupler is designed to operate in the VHF band 130-180 MHz, enabling efficient signal distribution in professional radio installations. With a standard impedance of 50?, it can handle power up to 1000W and features an extremely low insertion loss of 0.4dB.

The true standing wave ratio (VSWR) is less than 1.3, ensuring high performance; even with an open port, the VSWR remains low (<2.1). The mechanical structure is made of ENAW 6082 aluminum alloy, providing strength and lightness. The device is equipped with female N connectors and is designed to operate in a temperature range of -40°C to +80°C.

• Operating frequency: 130-180MHz
• Type: two-way coupler
• Impedance: 50?
• Maximum power: 1000W
• VSWR: <1.3 (1gate open <2.1)
• Insertion loss: 0.4dB
• Connectors: N female
• Material: ENAW 6082 aluminum alloy
• Operating temperature: -40°C à· +80°C

The Atel Antennas array antenna is designed for the UHF/TETRA 400-470MHz band, with a four-fold folded dipole configuration that guarantees a gain of 10dBi and a maximum power of 600W. The standard impedance is 50?, while the VSWR is less than 1.6, for reliable and high-quality transmissions.

Constructed with ENAW 6082 aluminum alloy boom, ENAW 6060 elements and stainless steel hardware, the structure benefits from a RoHS-compliant phosphochrome anti-corrosion treatment. It is suitable for outdoor installations exposed to harsh conditions, withstanding winds of up to 160km/h and temperatures from -40°C to +85°C. The antenna measures 2500mm and weighs 11000g. It mounts on poles with a diameter between 33 and 60mm and is equipped with an N-female connector, DC ground system and a hole for condensation drainage.

• Band: UHF 400-470MHz
• Configuration: array with four folded dipoles
• Impedance: 50?
• Gain: 10dBi
• Max power: 600W
• VSWR: <1.6
• Polarization: vertical
• Connector: N-female
• Materials: ENAW-6082/6060 aluminum, stainless steel
• Treatment: phospho-chromium, RoHS compliant
• Wind resistance: up to at 160km/h
• Operating temperature: -40°C à· +85°C
• Dimensions: 2500mm
• Weight: 11000g
• DC ground system and drainage hole
• Mounting: Ø33-60mm poles