Teltonika Networks

The adhesive GNSS antenna with SMA connector is designed to receive signals from major satellite positioning systems, such as GPS, GLONASS, Galileo and BeiDou. Thanks to the adhesive fixing and the 3-meter RG174 cable, it offers simple and versatile installation in professional IoT and industrial applications.

• Operating Frequency: 1575"1602MHz
• Polarization: RHCP
• Gain: 2.0dBi
• Axial Ratio: ‰¤3dB
• VSWR: ‰¤2.0
• LNA Gain: 26±2dB
• Noise Figure: 1.5dB
• Operating Voltage: 2.2"5.0VDC
• Consumption: 5"15mA
• Impedance: 50Ω
• Cable Type: RG174, Length 3000mm
• Connector: SMA Male
• Mounting: Adhesive
• Operating Temperature: "40°C to +85°C
• Operating Humidity: Up to 95%
• RoHS Compliant

This antenna is ideal for improving positioning accuracy and GNSS signal reception in Teltonika devices and complex environments.

The mobile magnetic antenna with SMA connector is designed to enhance the mobile connectivity of Teltonika devices, such as RUT routers and TRB units. Thanks to its magnetic mounting, it is ideal for mobile, temporary or vehicular solutions, offering simple and secure installation without drilling.

• Operating Frequencies: 699"868MHz / 1850"2690MHz
• Polarization: linear
• Gain: 1.0dBi
• VSWR: ‰¤3.0
• Impedance: 50Ω
• Cable: RG174, length 3000mm
• Connector: SMA male
• Mounting: magnetic
• Operating temperature: "40°C to +85°C
• Compliance: RoHS

Ideal solution for optimizing mobile signal reception in dynamic scenarios such as fleets, construction sites and temporary industrial installations.

The adhesive GNSS antenna with FAKRA connector is a compact and reliable solution for receiving satellite signals from GPS, GLONASS, Galileo and BeiDou. The adhesive fixing simplifies installation on flat surfaces, while the female FAKRA C connector ensures compatibility and solidity of the connection in professional and industrial environments.

• Operating frequency: 1575.42"1602MHz
• Polarization: RHCP
• Gain: 2dBi
• Antenna VSWR: <1.5
• Impedance: 50Ω
• Axial ratio: ‰¤3dB
• LNA amplifier: 26±2dB
• Noise figure: <1.5dB
• Supply voltage: 2.2"5VDC
• Consumption: 5"15mA
• LNA VSWR: <2.0
• Cable: RG174 3000mm
• Connector: FAKRA C female
• Mounting: adhesive (3M tape)
• Operating temperature: "40°C to +85°C
• Relative humidity: up to 95%
• Compliance: RoHS

Ideal for IoT and industrial applications requiring GNSS precision, FAKRA compatibility and quick and safe installation.

The Teltonika 9W EU power supply is designed to provide reliable power to devices from the RUT and TSW family, both in domestic and industrial settings. It supports a wide range of input voltages (100"240 VAC) and frequencies (50/60Hz), with built-in overcurrent and short-circuit protection.

• Input Voltage: 100"240VAC (range 90"264 VAC)
• Input Frequency: 50/60Hz (47"63Hz)
• Input Current: Approx. 0.5A
• Output: 9VDC, 1.0A (8.55"9.45VDC deviation)
• Input Connector: EU Type-C
• Output Connector: 4-pin, 3mm pitch
• Protection: Built-in short circuit
• HIPOT Dielectric Test: 4000VDC
• Efficiency: DoE Compliant LevelVI
• MTBF: approximately 30,000h
• Weight: approximately 94g
• Certifications: IEC/EN62368-1, EMC according to EN55032, 55035 and CISPR
• Operating temperature: "10°C to +40°C; storage: "20°C to +70°C
• Compliance: RoHS

This power supply is perfectly compatible with Teltonika routers such as RUT200/240/241/260 and TSW switches. Its compact design, integrated protection and high efficiency make it a reliable choice for constant power in IoT and networking solutions.

The Teltonika I/O Interface Connector Set is designed to ensure safe and professional connections in RUT and TRB devices equipped with GPIO, digital inputs and RS485 communication. Includes two 5-pin and two 3-pin connectors with 3.5mm pitch, compatible with cables from 0.2 to 1.5mm².

• Composition: 2-5 pins + 2-3 pins
• Maximum supported voltage: 300V
• Maximum supported current: 8A
• Supported conductor cross-section: 0.2"1.5mm² (24"16AWG)
• Pitch: 3.5mm
• Contact material: Tin-plated copper alloy
• Insulator material: PA66
• Operating temperature: "40°C to +105°C
• Flammability rating: UL 94V-0
• Compliance: RoHS

Ideal for industrial installations requiring robust, standardized, and reliable cabling on Teltonika devices for advanced control and monitoring.

The 4-way screw terminal power cable is a professional accessory for Teltonika devices requiring DC power and potential access to digital inputs/outputs. The 4-way screw terminal allows for direct connection, while the 4-pin output connector with 3mm pitch ensures compatibility with Teltonika router I/O cards.

• Input Connector: 4-way screw terminal
• Output Connector: 4-pin, 3mm pitch
• Cable: 4 conductors 0.129mm² (26AWG)
• Overall Length: approximately 2000mm
• Color coding: 1 Red (Power +), 2 Black (Ground "), 3 Green (Input/Output/NC), 4 White (Input/Output/NC)
• Compliance: RoHS

Ideal for powering and managing digital signals on Teltonika devices such as RUT-series, TRB-series and switches TSW, offering a robust and tidy connection without the need for special connectors.

The 35mm DIN rail mounting kit allows you to securely and neatly mount Teltonika devices inside technical panels or cabinets. The steel mount ensures strength and durability, while the included screws simplify installation without the need for additional hardware.

• Mounting Type: Standard 35mm DIN Rail
• Material: Low Carbon Steel
• Dimensions: 65.2 - 44.2 - 1.5mm
• Screws Included: 2 Philips Pan Head #6-32-3/16
• Weight: Approx. 57g
• Compliance: RoHS
• Compatibility: Teltonika routers (RUT200/240/260, RUT950/956, RUTX11) and TSW switches

Ideal solution for stable, industry-compliant mounting of Teltonika devices in professional installations and infrastructures.

The 35mm Compact DIN Rail Mounting Kit is a practical and lightweight solution for installing Teltonika devices in technical panels and industrial cabinets. Made of ABS+PC plastic, it allows for solid fixing while maintaining a minimal footprint.

• Mounting Type: Standard 35mm DIN Rail
• Material: ABS+PC plastic
• Dimensions: 70 - 25 - 14.5mm
• Weight: approximately 6.5g
• Screws included: 2 Philips Pan Head #6-32-3/16
• Certification: RoHS compliant

Ideal for discreet and efficient installations of Teltonika devices such as the TRB145, TRB245, RUT240, RUTX08, TSW100 and others that support compact DIN rail mounting.

The Teltonika BAT120 is an industrial backup power supply (UPS) designed to ensure continuous connectivity to Teltonika routers and gateways during power outages or fluctuations. Powered by two 18650 Li-Ion cells with a capacity of 2600mAh (17Wh), it supports up to 6 hours of autonomous operation.

Constructed with a rugged aluminum casing, the BAT120 features two 4-pin DC connectors (one for input, one for output), status LEDs, an on/off switch, and an alarm output. It offers reverse polarity protection, input overvoltage protection, and output overcurrent protection (3A). It can be powered from 9A 30VDC, delivers 12VDC in battery mode and maintains the input voltage in pass-through mode.

• Internal battery: 2600mAh (17Wh), 2- 18650 Li-Ion
• Maximum power in battery mode: 22W / 1.8A
• Input voltage: 9"30VDC; pass-through output: 9"30VDC; Battery output: 12VDC
• Inputs/Outputs: 4-pin industrial DC connectors
• Protection: reverse polarity, overvoltage, overcurrent 3A
• Status LEDs: IN PWR, OUT PWR, 4- charge indicators (SOC)
• Switch: On/Off slider
• Chassis material: aluminum
• Dimensions: 100 - 30 - 85mm; Weight: 315g
• Operating temperature: 0°C"45°C
• Mounting options: DIN rail, wall, or flat surface (accessory kit required)
• Certifications: CE/RED, UKCA, EAC
• Device compatibility: RUT2xx, RUT95x, RUT3xx, RUTXxx, TRB14x, TRB2xx, TSW110, TCR100

Perfect for industrial and IoT applications that require uninterrupted power even in the event of a power outage, with event reporting capabilities via Teltonika routers.

The Teltonika DAP140 is a compact and reliable industrial access point designed to ensure stable Wi-Fi 4 connectivity in critical scenarios. With support for mesh mode (802.11s), fast roaming (802.11r), and intelligent network management (802.11k/v), it is ideal for environments where clients frequently roam.

The RutOS operating system allows for comprehensive management via a web interface, SNMP, JSON-RPC API, or Teltonika's RMS platform. Its hardware features make it suitable for DIN rail, wall, or flat surface installations.

• Wi-Fi standard 802.11b/g/n with AP, client, mesh (802.11s), Multi-AP modes
• Up to 50 simultaneous connected devices
• Advanced security: WPA3-SAE, WPA2/3-EAP, MAC filtering, SSID hiding
• Two 10/100 Mbps Ethernet ports, auto MDI/MDIX
• 9-30V DC power supply via industrial connector or passive PoE on LAN2
• Aluminum enclosure, DIN rail, wall, or flat surface mount
• Operating temperature: -40°C to +75°C
• Management via RutOS, RMS, SNMP, JSON-RPC API

The Teltonika DAP142 is an access point designed for industrial applications requiring reliable wireless connectivity, robustness and flexibility. Compatible with the WiFi 4 (802.11b/g/n) standard, it supports Access Point, Client and Mesh (802.11s) modes with fast roaming, offering stable coverage and the ability to manage up to 50 simultaneous devices.

The compact structure integrates two 10/100 Mbps RJ-45 ports, one RS-232 (DB9) port, status LEDs, reset button and RP-SMA antenna. Power can be supplied via 3-pin connector or via Passive PoE 9-30 V DC, with reverse polarity and surge protection. It consumes less than 2W and features software protections such as firewall, WPA/WPA2/WPA3, MAC filters and remote management via Web or CLI.

The aluminum enclosure with DIN rail support ensures resistance and durability in harsh environments. With IP30 protection rating and an operating range of -40°C to +75°C, the DAP142 is suitable for demanding and critical industrial scenarios.

• Wireless Standard: IEEE 802.11b/g/n (WiFi 4)
• Modes: Access Point, Client, Mesh (802.11s) with fast roaming
• Simultaneous Connections: Up to 50 Devices
• Ports: 2 - RJ-45 10/100 Mbps, 1 - RS-232 (DB9), removable RP-SMA antenna
• Power Supply: 9-30 V DC via 3-pin connector or Passive PoE
• Maximum Power Consumption: <2 W
• Construction: Aluminum enclosure, DIN rail mounting
• Protection: IP30
• Operating temperature: -40 °C to +75 °C
• Dimensions: 113.1 - 68.6 - 25 mm
• Weight: approx. 0.149 kg

The NTP001 is a Teltonika Stratum1 network time server designed to synchronize UTC time with sub-millisecond accuracy in public or private networks, even without an Internet connection. Thanks to the GNSS module, it supports GPS, GLONASS, Galileo, BeiDou, and QZSS constellations to provide precise time guidance to network devices.

This compact plug-and-play solution includes one 10/100Mbps Ethernet LAN port (auto MDI/MDIX), RS232 and RS485 serial interfaces, three configurable digital inputs and three configurable digital outputs, and one analog input. It features remote monitoring and reboot functions, supports Modbus TCP and MQTT gateways, and can be managed via a web interface, SSH, SNMP, and JSON-RPC API. It also offers access control with TACACS+, RADIUS, and a web filter.