Special prices Teltonika

The Teltonika OTD140 is an industrial router designed for outdoor applications with LTE Cat4 mobile connectivity (up to 150Mbps download and 50Mbps upload), also compatible with 3G/2G networks. The dual-SIM design with automatic switching ensures always-on connection in the event of a main network failure.

The hardware structure is based on a robust PC+ASA plastic case with IP55 protection and an integrated bracket for pole or wall mounting. It features two 10/100Mbps auto MDI/MDIX Ethernet ports: one PoE-in port for powering via RJ45 cable and one PoE-out port for supplying power up to 15"24W. The power supply supports voltages from 42.5 to 57VDC and offers protection against reverse polarity and transient surge.

Key Features

• LTE Cat4 mobile connectivity with dual SIM and automatic failover
• 2 10/100Mbps auto MDI/MDIX RJ45 ports: PoE-in and PoE-out (802.3af/at)
• IP55 industrial PC+ASA enclosure with pole or surface mounting
• RutOS operating system (based on OpenWrt) with web interface, CLI, management via RMS, SNMP, MQTT, firewall and VPN
• QoS support, static and dynamic routing (BGP, OSPF v2, RIP, EIGRP, NHRP), Modbus TCP, NTP, DNS, SMS/USSD
• Mediatek 580MHz CPU, 128MB RAM, 16MB flash
• Operating temperature "40°C to +75°C, humidity 10"90% non-condensing
• Dimensions 110-49.3-235mm, weight varies depending on configuration
• Certifications CE, UKCA, FCC, IC, RCM, EAC; EMC and IEC62368-1 compliant

The Teltonika OTD500 is an industrial outdoor router designed for outdoor applications, featuring Sub-6GHz 5G connectivity (including LTE Cat 19 and 4G/3G/2G fallback) and dual-SIM and eSIM support with automatic switching. It offers high performance of up to 3.4Gbps download on 5G and up to 1.6Gbps on LTE Cat 19, ensuring reliable connectivity even in areas with variable mobile signal.

Featuring a rugged IP55 PC+ASA plastic enclosure and an integrated bracket for easy pole or wall mounting. It features two Gigabit RJ45 ports: one PoE-in (802.3af/at) for powering via Ethernet cable and one PoE-out (802.3af Alternative B) for powering external devices up to approximately 15W. Power is supplied from 42.5 to 57VDC with reverse polarity and surge protection.

Main Features</b.

• 5G Sub-6GHz SA/NSA mobile connectivity, LTE Cat 19, 3G/2G compatibility
• Dual SIM + eSIM with automatic switching for failover
• 2 Gigabit RJ45 ports (auto MDI/MDIX): 1 PoE-in (802.3af/at), 1 PoE-out (802.3af Alternative B, max ~15W)
• Outdoor enclosure IP55 in PC+ASA with integrated pole or surface mounting
• RutOS operating system (based on OpenWrt), remote management via RMS
• Advanced VPN: OpenVPN, IPsec, WireGuard, PPTP, L2TP, GRE, DMVPN, SSTP, ZeroTier, Tinc
• Static and dynamic routing: BGP, OSPF v2, RIP, EIGRP, NHRP; QoS, firewall, DDNS, VPN, hotspot captive portal
• Protocol support: TCP/UDP, IPv4/IPv6, NTP, SSH, SNMP, MQTT, TR-069, Modbus TCP
• Hardware: MediaTek dual-core 880MHz, 256MB RAM, 16MB flash
• Power consumption: ‰¤2.5W idle, ‰¤9W max, PoE-out ~21W
• Dimensions 110-49.3-235mm, weight approx. 385g
• Operating temperature: "40°C / +75°C; humidity 10"90% non-condensing
• Certifications CE, UKCA, FCC, IC, RCM, EAC, UCRF; EMC compliance and IEC62368-1

standards

The Mobile Rooftop Combo MIMO Antenna with SMA Connectors is a Teltonika solution designed for vehicular applications requiring reliable LTE/5G connectivity. It includes two antennas (Main + Aux) with SMA male connectors for MIMO reception, and each 3m RG174 cable ensures flexible installation.

• Supported LTE/5G Frequencies: 698"960MHz and 1710"2690MHz
• Polarization: Linear
• Main antenna gain: approximately 2.5dBi; secondary: 2.0dBi
• VSWR: <3.0
• Impedance: 50Ω
• Connectors: 2 - SMA male (Main + Aux)
• Cables included: RG174, length 3000mm
• Mounting: screw on roof or flat surface
• Environmental protection: IP65 (excluding cable outlet)
• Material: UV-resistant ABS plastic
• Dimensions: diameter approx. 81.3mm, height approx. 15mm; Weight approx. 157g
• Operating temperature: "40°C to +85°C
• Compliance: RoHS compliant

Suitable for Teltonika devices such as RUT200, RUT240, RUT950, mobile installations in vehicles or industrial environments where stable LTE/5G reception in a discrete format is required.

The SISO Mobile GNSS Wi-Fi Rooftop Combo Antenna with SMA is an integrated solution designed to offer mobile connectivity, satellite positioning and Wi-Fi coverage in a single compact antenna, ideal for vehicle or outdoor installations. It simultaneously supports an LTE/5G link in SISO mode, a GNSS channel for high-precision positioning and a Wi-Fi connection, maintaining a slim profile for roof mounting.

• LTE/5G SISO: SMA male connector, frequencies 617"960MHz and 1710"2690MHz, gain 3.5dBi, VSWR ‰¤1.5, impedance 50Ω
• GNSS: SMA male connector, frequencies 1575.42"1610MHz, polarization RHCP, LNA gain 28dB, noise figure <1.5dB, VSWR ‰¤1.5, power supply 2.7"5VDC, current <15mA, impedance 50Ω
• Wi-Fi: RP-SMA male connector, frequencies 2350"2500MHz, gain 2.5dBi, VSWR ‰¤1.5, impedance 50Ω
• Cables: three RG174 3000mm long
• Mounting: roof screw (à˜ 80.5mm - h 15.2mm)
• Environmental protection: IP67 (excluding cable exit)
• Materials: UV-resistant ABS radome
• Weight: approx. 215g; operating temperature "40°C to +85°C
• Compliance: RoHS

Perfect for Teltonika devices such as the TRB245, TRB255 or RUTx12/14 when you need mobile coverage, location and Wi-Fi integrated into a single antenna with a discreet profile and easy mounting.

The RUT200 industrial router offers Cat4 LTE, Ethernet, and Wi-Fi connectivity for IoT, mobile, or industrial applications. Equipped with two Ethernet ports, it supports dual SIM (failover), and has external antennas for cellular and Wi-Fi. Includes digital I/O and advanced security and management features, accessible remotely via Teltonika RMS.

• Connectivity: LTE Cat4, Ethernet 10/100, Wi-Fi 802.11b/g/n
• Dual SIM, auto failover, LTE and Wi-Fi antennas included
• I/O: 1 digital input, 1 open collector output (30V, 300mA)
• Power: 9"30VDC, 4-pin industrial connector, passive PoE support
• Functions: VPN (OpenVPN, IPsec, WireGuard¦), firewall, failover, DDNS
• Management: RMS, SNMP, TR-069, MQTT, CLI, API
• Installation: Integrated DIN rail mount or mounting on Surface
• Certifications: CE/RED, UKCA, RoHS, REACH

Ideal solution for complex environments requiring versatile connectivity, advanced security, and efficient remote management.

The RUT206 is an industrial cellular router designed for M2M and IoT applications in industrial environments. It provides highly reliable connectivity via 4G LTE Cat4, Wi-Fi (802.11b/g/n), and Ethernet, with automatic failover between wired, cellular, or Wi-Fi WAN. It is ideal for integrating new and legacy CNC machines thanks to RS232 and RS485 support and protocols such as Modbus, DNP3, and DLMS, ensuring operational continuity even on existing systems. Rugged engineering includes IP30 aluminum housing, flexible power supply (DC 9-57V input, active or passive PoE), dual SIM for redundancy, micro-SD up to 2TB, and remote management via SMS, email, or RMS.

• 4G/LTE Cat4 cellular connectivity with 3G/2G support
• Dual SIM with auto failover, management via SMS/email/RMS
• 2 x 10/100Mbps Ethernet ports with PoE In support (active 802.3af or passive)
• Built-in 2.4GHz IEEE802.11b/g/n Wi-Fi
• RS232 and RS485 serial interfaces (6-pin terminal block)
• Micro-SD slot up to 2TB (FAT32, NTFS, ext2/3/4) for local storage
• Compact size 83-25-83mm, weight 132g; mountable on DIN rail, wall or surface
• Wide power supply range 9-57VDC, reverse polarity and transient protection
• Low power consumption (2W idle " 3.5W max)
• Operating range "40°C to +75°C, humidity 10-90% non-condensing
• CE, UKCA, CB, RCM, EAC, UCRF approvals; IP30 design

The RUT241 is an industrial cellular router designed for M2M and IoT applications requiring reliable connectivity. It supports 4G LTE Cat4 networks up to 150Mbps, 3G up to 42Mbps, and 2G up to 236kbps. It features integrated Wi-Fi (802.11b/g/n), eSIM support, and two 10/100Mbps Ethernet ports (WAN configurable as LAN), with Auto MDI/MDIX and passive PoE on LAN1. Powered by 9 to 30VDC with reverse polarity protection, it consumes less than 6.5W.

Based on RutOS (OpenWrt), it offers static/dynamic routing, automatic failover, load balancing, VLANs, and advanced VPNs. The integrated firewall protects against attacks, while remote management is possible via WebUI, RMS, SSH, SMS, and SNMP. It operates in extreme environments from "40°C to +75°C with an IP30 housing, and is DIN-rail, wall, or surface mountable.

The RUT241 is an industrial cellular router designed for M2M and IoT applications requiring reliable connectivity. It supports 4G LTE Cat4 networks up to 150Mbps, 3G up to 42Mbps, and 2G up to 236kbps. It features integrated Wi-Fi (802.11b/g/n), eSIM support, and two 10/100Mbps Ethernet ports (WAN configurable as LAN), with Auto MDI/MDIX and passive PoE on LAN1. Powered by 9 to 30VDC with reverse polarity protection, it consumes less than 6.5W.

Based on RutOS (OpenWrt), it offers static/dynamic routing, automatic failover, load balancing, VLANs, and advanced VPNs. The integrated firewall protects against attacks, while remote management is possible via WebUI, RMS, SSH, SMS, and SNMP. It operates in extreme environments from "40°C to +75°C with an IP30 housing, and is DIN-rail, wall, or surface mountable.

The RUT260 is an industrial LTE Cat6 cellular router designed to ensure fast and stable connectivity in critical environments. Compact and rugged, it offers speeds of up to 300Mbps download and 50Mbps upload thanks to LTE technology with carrier aggregation. It features two 10/100Mbps Ethernet ports (one of which can be configured as WAN or LAN), IEEE802.11b/g/n Wi-Fi in Access Point or Station mode, and flexible power supply via a 9"30V DC input with passive PoE support on LAN1. The IP30 aluminum design allows for DIN rail, wall, or flat surface installation, with guaranteed operation from "40°C to +75°C.

Based on RutOS, an open source operating system developed by Teltonika based on OpenWrt, the RUT260 supports static and dynamic routing, automatic failover, load balancing, an advanced firewall, VPN functions (OpenVPN, IPsec, GRE, WireGuard, ZeroTier, L2TP, PPTP, SSTP), industrial protocols (Modbus, MQTT, SNMP), and remote management tools (WebUI, SSH, CLI, RMS, FOTA, SMS). Built-in digital I/O ports allow direct integration with external sensors or systems for automatic notifications via RMS or SMS. An ideal device for M2M and IoT solutions where a reliable and configurable mobile network is required.

The RUT361 is an industrial cellular router with LTE Cat6 connectivity up to 300Mbps (download) and 50Mbps (upload) thanks to carrier aggregation technology. It is backward compatible with 3G networks up to 42Mbps and offers 802.11b/g/n Wi-Fi in Access Point or Station mode with support for up to 50 simultaneous clients.

It features two 10/100Mbps Ethernet ports (one WAN configurable as LAN), with Auto MDI/MDIX support, and configurable digital inputs and outputs on the power connector (max 30V/300mA). It can be powered via a 4-pin 9 to 30V DC connector with reverse polarity and transient protection; Passive PoE on LAN1 is also available (requires specialized hardware).

Based on RutOS (OpenWrt), the device supports static and dynamic routing (BGP, OSPF v2, RIP, EIGRP, NHRP), VLAN, QoS, policy routing, NAT, and an advanced firewall. It includes WAN failover, mobile data quota, web filtering, and hotspot/captive portal.

Security is ensured by multi-protocol VPN support (OpenVPN, IPsec, GRE, WireGuard, ZeroTier, PPTP, L2TP, SSTP, Stunnel, DMVPN), DDoS protection, and port scanning defense. Remote management via WebUI, CLI, SSH, RMS, MQTT, SNMP, JSON-RPC, Modbus TCP, FOTA.

Designed for industrial durability: IP30 aluminum housing, dimensions 100x30x85mm, weight approximately 243g, operating range "40°C to +75°C with humidity up to 90% non-condensing. Mounts on DIN rail or flat surfaces. CE, UKCA, FCC, IC, RCM, CB, RoHS, REACH, and WEEE certifications.Main Features

• 4G LTE Cat6 up to 300Mbps DL / 50Mbps UL; 3G fallback up to 42Mbps
• Wi-Fi 802.11b/g/n, 2-2MIMO, supports up to 50 clients
• 2 x 10/100Mbps Ethernet ports (1 WAN + 1 LAN), Auto MDI/MDIX
• Configurable digital input and output on DC connector (max 30V/300mA)
• External Mini SIM slot (2FF), LEDs for connection, network, and power status
• Mediatek 580MHz CPU, 128MB DDR2 RAM, 16MB NOR Flash
• Static/dynamic routing, VLAN, QoS/SQM, advanced firewall
• Multiple VPNs (OpenVPN, IPsec, GRE, WireGuard, ZeroTier, L2TP, PPTP, SSTP)
• Mobile quota, hotspot, web filtering, and Wi-Fi roaming supported
• Remote management via WebUI, CLI, SSH, RMS, SNMP, MQTT, JSON-RPC, Modbus TCP, FOTA
• Dimensions 100x30x85mm, weight approx. 243g, IP30 aluminum housing
• Operation "40°C/+75°C, humidity 10-90% non-condensing
• Certifications CE, UKCA, FCC, IC, RCM, CB, RoHS, REACH, WEEE

The RUT901 is an industrial cellular router with 4G LTE Cat4 connectivity up to 150Mbps download (50Mbps upload), backwards compatible with 3G and 2G. It supports dual SIM with automatic switching, 802.11b/g/n Wi-Fi with hotspot for up to 100 simultaneous clients, and has four 10/100Mbps Ethernet ports (1 WAN + 3 LAN).

It features configurable digital input and output on a DC connector (0-6V/8-30V input, max 30V/300mA Open Collector output). It includes a USB 2.0 port, status LEDs for mobile connection, signal, LAN, and power. Powered by 9 to 30V DC with reverse polarity and transient protection; it supports passive PoE on LAN1 (optional). Power consumption is less than 2W at idle and up to 7W.

Based on RutOS (OpenWrt), it offers static/dynamic routing (BGP, OSPF, RIP, EIGRP, NHRP), policy routing, WAN failover, load balancing, configurable firewall and VLAN support, QoS/SQM. It supports multi-protocol VPN (OpenVPN, IPsec, GRE, WireGuard, ZeroTier, PPTP, L2TP, SSTP, DMVPN), VoIP passthrough, anti-DDoS security, and port scanning.

Remote management is available via WebUI, CLI, SSH, TR-069, MQTT, SNMP, JSON-RPC, Modbus TCP, FOTA, and Teltonika RMS. Compatible with IoT cloud platforms such as Azure IoT Hub, Cumulocity, and ThingWorx.

Constructed of aluminum with an IP30 rating, dimensions of 110 x 50 x 100 mm and a weight of approximately 297 g. It can be mounted on a DIN rail, wall, or flat surfaces. Designed to operate from -40°C to +75°C with operating humidity between 10% and 90% non-condensing. It is certified to CE, UKCA, RCM, FCC, IC, CB, RoHS, REACH, and WEEE.Main Features

• 4G LTE Cat4 up to 150Mbps DL / 50Mbps UL; 3G/2G support
• Dual SIM with automatic failover
• Wi-Fi 802.11b/g/n hotspot for up to 100 users
• 4 10/100Mbps Ethernet ports (1 WAN + 3 LAN), AutoMDI/MDIX
• Configurable digital inputs and outputs on DC connector (max 30V/300mA)
• USB 2.0 port for external devices
• 9"30V DC power supply with protection, optional passive PoE on LAN1
• Power consumption <2W idle, max 7W
• Static/dynamic routing, WAN failover, load balancing, advanced firewall
• Multi-protocol VPN: OpenVPN, IPsec, GRE, WireGuard, ZeroTier, PPTP, L2TP, SSTP, DMVPN
• Remote Management: WebUI, CLI, SSH, TR-069, MQTT, SNMP, JSON-RPC, Modbus TCP, FOTA, RMS
• IoT Cloud Compatibility: Azure IoT Hub, Cumulocity, ThingWorx
• IP30 aluminum enclosure; dimensions 110x50x100mm; weight ~297g
• Operating range "40°C/+75°C; humidity 10-90% non-condensing
• Certifications: CE, UKCA, RCM, FCC, IC, CB, RoHS, REACH, WEEE

The RUT906 is an industrial LTE Cat4 cellular router (up to 150Mbps download, 50Mbps upload), compatible with 3G and 2G networks. It supports dual-SIM with automatic failover and includes 802.11b/g/n Wi-Fi with support for up to 100 simultaneous clients.

It features four 10/100Mbps Ethernet ports (1 WAN + 3 LAN), RS232 and RS485 serial interfaces, a USB port, and GNSS for geolocation and time synchronization services. It includes configurable digital I/Os on a DC connector and a 10-pin industrial connector.

Based on RutOS (OpenWrt), it offers static/dynamic routing (BGP, OSPF, RIP, EIGRP, NHRP), NAT, and advanced firewall with QoS/SQM, VLAN, WAN failover, and load balancing. It supports MQTT, BACnet, OPC UA, DNP3, Modbus, SMS, and USSD.

Security includes multi-protocol VPN (OpenVPN, IPsec, GRE, WireGuard, ZeroTier, PPTP, L2TP, SSTP, DMVPN), anti-DDoS protection, and port scan blocking. In addition to the WebUI and CLI, it supports RMS, SNMP, MQTT, JSON-RPC, Modbus TCP, FOTA, and TR-069.

The IP30 aluminum enclosure is designed for temperatures from "40°C to +75°C and humidity from 10% to 90% (non-condensing). Dimensions are 109.5-50-100mm and weighs approximately 295g. Mountable on DIN rails or flat surfaces.Main Features

• 4G LTE Cat4 up to 150Mbps DL / 50Mbps UL; Fallback to 3G/2G :contentReference[oaicite:3]{index=3}
• Dual SIM with automatic switching for coverage and limits
• Wi-Fi 802.11b/g/n with up to 100 simultaneous clients and WPA3 supported :contentReference[oaicite:5]{index=5}
• 4 10/100Mbps Ethernet ports (1 WAN + 3 LAN), Auto MDI/MDIX :contentReference[oaicite:6]{index=6}
• Integrable RS232 and RS485 interfaces for industrial protocols :contentReference[oaicite:7]{index=7}
• Configurable digital I/O on both DC and 10-pin industrial connectors pin :contentReference[oaicite:8]{index=8}
• USB 2.0 port and integrated GNSS for location services and NTRIP :contentReference[oaicite:9]{index=9}
• Static and dynamic routing, policy routing, VLAN, QoS, advanced firewall :contentReference[oaicite:10]{index=10}
• Multi-protocol VPN: OpenVPN, IPsec, GRE, WireGuard, ZeroTier, DMVPN, PPTP, L2TP, SSTP :contentReference[oaicite:11]{index=11}
• IoT support: MQTT, BACnet, OPC UA, DNP3, Modbus, USSD, SMS :contentReference[oaicite:12]{index=12}
• Remote management: WebUI, CLI, RMS, SNMP, MQTT, JSON-RPC, Modbus TCP, FOTA, TR-069 :contentReference[oaicite:13]{index=13}
• IP30 aluminum enclosure, dimensions 109.5-50-100mm, weight ~295g :contentReference[oaicite:14]{index=14}
• Operating range "40°C to +75°C; operating humidity 10-90% non-condensing :contentReference[oaicite:15]{index=15}
• Certifications: CE, UKCA, RCM, FCC, IC, CB, RoHS, REACH, WEEE :contentReference[oaicite:16]{index=16}