100W High-Pass Filter 118-520MHz
Description
The PRO-HP-118 100 W 118-520 MHz high-pass filter is designed to protect radios operating in the 118-520 MHz band from interference generated by high-power transmitters in the 0-108 MHz LMR and broadcast bands. Amphenol-Procom uses a high-order Chebyshev design that ensures high attenuation in the rejection band, strong selectivity, and low insertion loss.
The device supports a maximum input power of 100 W CW and 30 W AM with 100% modulation, with a 50 Ohm impedance, a VSWR of less than 1.5:1, and attenuation greater than or equal to 27 dB. The ANT port is DC-grounded, while the milled aluminum construction with black vinyl coating contributes to high mechanical strength and corrosion protection. The filter uses an N(f) connection, has dimensions of 133 x 80 x 31 mm, weighs approximately 0.38 kg and is IP64 protected.
Main features
- High-pass filter for radios operating in the 118-520 MHz band
- Protection against interference from the 0-108 MHz LMR and broadcast band
- Maximum input power 100 W CW and 30 W AM with 100% modulation
- Insertion loss less than or equal to 1.0 dB
- Attenuation greater than or equal to 27 dB
- Impedance of 50 Ohm
- VSWR less than 1.5:1
- ANT port with DC ground
- Connector N(f)
- Milled aluminum housing with black anti-corrosion vinyl coating
- Dimensions 133 x 80 x 31 mm
- Weight approx. 0.38 kg
- Protection class IP64
- Operating temperature -40 °C to +60 °C on the housing surface