Fixed wireless

The Ceragon Networks 95W 1Gbp Indoor Passive PoE Adapter is designed to combine data transmission and power in a single compact device, suitable for connecting wireless modems and other Link or Net products for indoor or outdoor applications. The device uses a 100-240V AC input via an IEC320-C14 connector and provides 1Gbp data output and 55V power via a shielded RJ45 port.

With natural convection cooling, wall mounting support, and built-in overcurrent, short circuit, and overvoltage protection, this Ceragon Networks solution supports reliable installations in a variety of operating environments. The product also complies with Level 6 efficiency requirements and operates at full load in a temperature range of -10 C to +40 C.

Key Features

• 95 W 1 GBT Indoor Passive Power over Ethernet Adapter
• AC input 90 to 264 VAC with frequency 47-63 Hz
• 55 VDC output with current up to 1.7 A in indoor conditions
• 1 RJ45 port for PoE and 1 RJ45 port for LAN
• 3-pole IEC320-C14 AC input connector
• Natural convection cooling and compact dimensions 170.85 x 97.49 x 24.12 mm
• Wall-mounted installation support
• Minimum efficiency 88% and no load power less than or equal to 0.8 W
• Short circuit, overcurrent and overvoltage protection
• FCC Part 15 Class B, EN55032 Class B, CE and TUV compliant
• MTBF of 30,000 hours according to Telcordia SR-332 Issue 2

The 5-6 GHz 90° asymmetric horn antenna is an RF element solution designed to cover the unlicensed 5 and 6 GHz bands with stable wideband performance and balanced H+V beams. The asymmetric design with strongly suppressed sidelobes promotes high noise rejection and supports high-density AP cluster deployments and dense colocation scenarios.

The product uses a TwistPort waveguide connector for direct connection to radios with a waveguide port or via a TP Adaptor to common coaxial connectors. The construction uses aluminum, stainless steel, ABS, PMMA and zinc alloy, with IP65 protection rating, weight of 2.8 kg and wind survival up to 160 km/h.

Main Features

• Horn type antenna with frequency coverage from 4,900 to 7,125 MHz
• Nominal gain of 15 dBi
• Dual linear polarization H + V
• Azimuth beamwidth at -3 dB: H 55°, V 73° and at -6 dB: H 90°, V 90°
• Elevation beamwidth at -3 dB: H 1.7°, V 1.7° and at -6 dB: H 25°, V 25°
• Beam efficiency of 96% and front-to-back ratio of 27 dB
• 50 Ohm impedance
• TwistPort waveguide radio connector
• IP65 protection rating for outdoor installations
• 40-80 mm pole mounting with mechanical adjustment of plus or minus 20° in elevation and azimuth
• Materials: aluminum, stainless steel, ABS, PMMA and zinc alloy
• Operating temperature from -35 °C to +60 °C
• Main dimensions up to 459 x 390 x 141 mm

The Aviat Networks 18 GHz 0.6 m parabolic antenna is part of the ValuLine High Performance Low Profile range and is a single-polarized solution designed for applications in the 17.700-19.700 GHz band with Aviat WTM4100 and WTM4200 interfaces. The low-profile design with a one-piece reflector, white finish, and gray composite broadband radome allows for a compact and tidy installation while maintaining manufacturer-defined electrical performance.

With a nominal diameter of 0.6 m, this antenna offers a horizontal and vertical beamwidth of 2.1 degrees, 30 dB cross-polarization discrimination, a front-to-back ratio of 67 dB, and gain of up to 39.4 dBi in the top band. Mechanically, it supports poles from 50 mm to 120 mm, includes fine azimuth and elevation adjustment of plus or minus 15 degrees, and has a net weight of 8 kg.

The Aviat Networks solution is supplied in a compact pack with a flashless radome and is suitable for contexts where small dimensions, declared regulatory compliance, and resistance to environmental agents according to the reported specifications are required. The operating wind speed is 180 km/h, while the survival speed reaches 250 km/h.

Main Features

• VauLine High Performance Low Profile single-polarized antenna
• Operating band 17.700-19.700 GHz
• Nominal diameter 0.6 m
• Aviat WTM4100 and WTM4200 interface
• One-piece reflector
• Grey composite broadband radome without flash
• Antenna color white
• Horizontal and vertical beamwidth 2.1 degrees
• Gain 38.6 dBi low band, 39.0 dBi mid band, 39.4 dBi top band
• XPD 30 dB and front-to-back ratio 67 dB
• Return loss 17.7 dB and VSWR 1.30
• Fine adjustment of azimuth and elevation of plus or minus 15 degrees
• Mounting on 50 mm to 120 mm masts
• Net weight 8 kg
• Operating wind speed 180 km/h and survival 250 km/h

The 71-86 GHz 0.6 m Parabolic Antenna is a low-profile, single-polarization microwave antenna suitable for applications in the 71.000 to 86.000 GHz band. Within the Aviat Networks portfolio, this 0.6 m nominal diameter model combines a compact profile, high gain, and ETSI 302 217 Class 3 and US FCC Part 101.115 electrical compliance.

The product offers 0.5 degrees of horizontal and vertical beamwidth, 30 dB of cross polarization discrimination, 69 dB of front-to-back ratio, and 14.0 dB of return loss. The claimed gain is 50.0 dBi in the low band, 50.8 dBi in the mid band and 51.5 dBi in the top band, with a maximum VSWR of 1.50.

Mechanically, Aviat Networks provides fine adjustment of azimuth and elevation of plus or minus 15 degrees, mounting on masts with diameters from 50 mm to 115 mm and a net weight of 8 kg. The antenna supports a wind velocity operational of 108 km/h and a wind velocity survival rating of 250 km/h.

Main Features

• Low profile single-polarized microwave antenna.
• Operating band from 71.000 to 86.000 GHz.
• Nominal diameter of 0.6 m.
• Gain up to 51.5 dBi.
• Horizontal and vertical beamwidth of 0.5 degrees.
• Cross Polarization Discrimination of 30 dB.
• Front-to-Back Ratio of 69 dB.
• Return Loss of 14.0 dB and VSWR of 1.50.
• Fine adjustment of azimuth and elevation of plus or minus 15 degrees.
• Mounting on a 50 mm to 115 mm pole.
• Net weight 8 kg.
• Complies with ETSI 302 217 Class 3 and US FCC Part 101.115.
• Wind resistance up to 250 km/h.

The Cambium Networks 56V Gigabit Surge Suppressor is an essential accessory for ensuring the safety of professional wireless infrastructure. Lightning and power surges are among the leading causes of failure in tower-mounted systems, and this device is designed to dramatically reduce the risk of damage, improving operational reliability and reducing maintenance costs.

Compatible with the Cambium PMP 450i, PTP 450i and PTP 820S solutions, the suppressor integrates high-performance TVS diodes that ensure fast and effective protection. It supports 1000 Base-T Gigabit Ethernet connections with dual RJ-45 connectors and can be mounted on either a pole or a wall. With IP54 protection, 5 ns response time and current resistance up to 172 A, it represents a robust and reliable solution even for extreme environments.

• Compatible with PMP 450i, PTP 450i and PTP 820S
• 56 V voltage
• TVS diodes for advanced lightning and surge protection
• 1000 Base-T Gigabit Ethernet support
• Integrated dual RJ-45 connector
• IP54 protection for outdoor use
• Pole or wall mountable
• Wind resistance up to 321 km/h
• Response time: 5 ns
• Maximum supported current: 172 A

The Cambium Networks 30V Gigabit Surge Suppressor is designed to reduce the risk of damage caused by lightning and power surges in outdoor wireless installations. These events are one of the most common causes of equipment failure in towers up to 300 m high. The device helps minimize network disruptions and maintenance costs.

Compatible with Cambium 450, 450b (Subscriber Module), F180, and F200 systems, this suppressor integrates TVS diodes for fast and effective protection. It supports 1000 Base-T Gigabit Ethernet connections via two RJ-45 connectors and is designed for pole or wall mounting. With IP54 protection, wind resistance up to 321 km/h and a typical response time of 5 ns, it ensures reliable performance even in harsh environments.

• Compatible with Cambium 450, 450b, F180 and F200
• 30 V voltage
• TVS diodes for advanced protection
• 1000 Base-T Gigabit Ethernet support
• Dual RJ-45 connectors
• IP54 protection against dust and water
• Pole or wall mountable
• Wind resistance up to 321 km/h
• Typical response time: 5 ns
• Maximum current supported: 216 A

The 5-Piece M25 Long Cable Gland is a solution designed for protecting and managing cables in professional settings. Thanks to its long format and M25 thread, it allows for tidy and safe cable routing, making it ideal for installations that require precision and reliability.

Belonging to the Cable Protection and Cable Gland categories, this accessory integrates seamlessly with Cambium Networks solutions, helping to improve the organization and protection of cabling.

Main Features

• Type: Cable Gland
• Format: Long
• Thread: M25
• Category: Cable Protection
• Pack of 5

The Cambium Precision Mount for the cnWave V3000 is a critical accessory for achieving maximum stability and performance from 60 GHz wireless installations. It allows you to mount the cnWave V3000 client node on a vertical pole, ensuring accurate and stable positioning.

The mount allows for fine adjustments of up to 18° in azimuth and ±30° in elevation, facilitating optimal alignment during installation. Designed to withstand harsh environmental conditions, the bracket is compatible with poles with diameters from 25 mm to 80 mm, making it versatile and practical for various deployment scenarios.

• Original Cambium accessory for cnWave V3000
• Vertical pole mounting
• Fine adjustment: 18° azimuth, ±30° elevation
• Compatible with poles à˜ 25-80 mm
• Rugged and durable construction
• Facilitates precise alignment of the wireless link

The Cambium Universal Pole Mount is an essential accessory for professional wireless installations, designed for maximum reliability and ease of installation. It supports poles with diameters from 25 to 76 mm (1-3 inches), providing a solid and durable mounting even in challenging outdoor environments.

This mount is compatible with a wide range of Cambium devices, including the cnWave V5000 60 GHz nodes, the PTP 550, PTP 550E, PTP 670, PTP 48700, PTP 78700, and the PMP 450i Connectorized devices. Thanks to its robustness, it allows for stable installation and precise configuration, reducing setup times and ensuring consistent performance.

• Original Cambium accessory for outdoor installations
• Compatible with cnWave V5000, PTP 550/550E, PTP 670, PTP 48700, PTP 78700 and PMP 450i Connectorized
• Universal mounting on poles à˜ 25-76 mm (1-3 inches)
• Robust and durable structure
• Secure fixing even in difficult environmental conditions

The 0.6 m M6 grounding cable is a dedicated solution for creating safe and tidy grounding connections in professional environments. The 0.6 m length allows for practical installation, facilitating the connection between grounding points in small spaces.

Equipped with M6 ring terminals on both ends, the cable provides a stable attachment and is compatible with M6 connections. This accessory is part of the Cambium Networks offering to support correct installations and reliable grounding of infrastructures.

Main Features

• Length: 0.6 m
• M6 ring terminals on both ends
• Type: grounding cable
• Compatible with M6 connections

The alignment tube for cnWave V3000 60 GHz is an accessory designed to simplify the setup of Point to Point connections made with the V3000. Designed to simplify installation, it allows for more precise alignment of the wireless link even over significant distances.

With a 1.2° field of view, it supports link alignment up to 600 m, making it ideal for V3000 devices with a 0.8° beamwidth. Cambium Networks developed this solution to improve operational efficiency and accuracy during 60 GHz link commissioning. Key Features

• Compatible with cnWave V3000 60 GHz
• Support for Point-to-Point links
• Easy alignment up to 600 m
• 1.2° field of view
• Optimized for 0.8° beamwidth

The Cambium Networks PMP 450 platform increases performance with the addition of the PMP 450b subscriber module.

With the PMP 450b subscriber module, ultra-wideband radios support the entire 4.9 to 5.9 GHz band, and the gigabit Ethernet interface ensures the device achieves maximum transfer speeds. The module features a 3.5 mm audio jack, allowing direct connection of headphones without adapters. The new System on a Chip (SoC) increases packet processing power more than four times that of the 450 SM, with an aggregation capacity of more than 250 Mbps in a 40 MHz channel.