Fixed wireless

The Cambium Networks 56V Gigabit Surge Suppressor is an essential accessory for ensuring the safety of professional wireless infrastructure. Lightning and power surges are among the leading causes of failure in tower-mounted systems, and this device is designed to dramatically reduce the risk of damage, improving operational reliability and reducing maintenance costs.

Compatible with the Cambium PMP 450i, PTP 450i and PTP 820S solutions, the suppressor integrates high-performance TVS diodes that ensure fast and effective protection. It supports 1000 Base-T Gigabit Ethernet connections with dual RJ-45 connectors and can be mounted on either a pole or a wall. With IP54 protection, 5 ns response time and current resistance up to 172 A, it represents a robust and reliable solution even for extreme environments.

• Compatible with PMP 450i, PTP 450i and PTP 820S
• 56 V voltage
• TVS diodes for advanced lightning and surge protection
• 1000 Base-T Gigabit Ethernet support
• Integrated dual RJ-45 connector
• IP54 protection for outdoor use
• Pole or wall mountable
• Wind resistance up to 321 km/h
• Response time: 5 ns
• Maximum supported current: 172 A

The Cambium Networks 30V Gigabit Surge Suppressor is designed to reduce the risk of damage caused by lightning and power surges in outdoor wireless installations. These events are one of the most common causes of equipment failure in towers up to 300 m high. The device helps minimize network disruptions and maintenance costs.

Compatible with Cambium 450, 450b (Subscriber Module), F180, and F200 systems, this suppressor integrates TVS diodes for fast and effective protection. It supports 1000 Base-T Gigabit Ethernet connections via two RJ-45 connectors and is designed for pole or wall mounting. With IP54 protection, wind resistance up to 321 km/h and a typical response time of 5 ns, it ensures reliable performance even in harsh environments.

• Compatible with Cambium 450, 450b, F180 and F200
• 30 V voltage
• TVS diodes for advanced protection
• 1000 Base-T Gigabit Ethernet support
• Dual RJ-45 connectors
• IP54 protection against dust and water
• Pole or wall mountable
• Wind resistance up to 321 km/h
• Typical response time: 5 ns
• Maximum current supported: 216 A

The Cambium Networks 30V Gigabit Surge Suppressor is designed to reduce the risk of damage caused by lightning and power surges in outdoor wireless installations. These events are one of the most common causes of equipment failure in towers up to 300 m high. The device helps minimize network disruptions and maintenance costs.

Compatible with Cambium 450, 450b (Subscriber Module), F180, and F200 systems, this suppressor integrates TVS diodes for fast and effective protection. It supports 1000 Base-T Gigabit Ethernet connections via two RJ-45 connectors and is designed for pole or wall mounting. With IP54 protection, wind resistance up to 321 km/h and a typical response time of 5 ns, it ensures reliable performance even in harsh environments.

• Compatible with Cambium 450, 450b, F180 and F200
• 30 V voltage
• TVS diodes for advanced protection
• 1000 Base-T Gigabit Ethernet support
• Dual RJ-45 connectors
• IP54 protection against dust and water
• Pole or wall mountable
• Wind resistance up to 321 km/h
• Typical response time: 5 ns
• Maximum current supported: 216 A

The Cambium Precision Mount for the cnWave V3000 is a critical accessory for achieving maximum stability and performance from 60 GHz wireless installations. It allows you to mount the cnWave V3000 client node on a vertical pole, ensuring accurate and stable positioning.

The mount allows for fine adjustments of up to 18° in azimuth and ±30° in elevation, facilitating optimal alignment during installation. Designed to withstand harsh environmental conditions, the bracket is compatible with poles with diameters from 25 mm to 80 mm, making it versatile and practical for various deployment scenarios.

• Original Cambium accessory for cnWave V3000
• Vertical pole mounting
• Fine adjustment: 18° azimuth, ±30° elevation
• Compatible with poles à˜ 25-80 mm
• Rugged and durable construction
• Facilitates precise alignment of the wireless link

The Cambium Universal Pole Mount is an essential accessory for professional wireless installations, designed for maximum reliability and ease of installation. It supports poles with diameters from 25 to 76 mm (1-3 inches), providing a solid and durable mounting even in challenging outdoor environments.

This mount is compatible with a wide range of Cambium devices, including the cnWave V5000 60 GHz nodes, the PTP 550, PTP 550E, PTP 670, PTP 48700, PTP 78700, and the PMP 450i Connectorized devices. Thanks to its robustness, it allows for stable installation and precise configuration, reducing setup times and ensuring consistent performance.

• Original Cambium accessory for outdoor installations
• Compatible with cnWave V5000, PTP 550/550E, PTP 670, PTP 48700, PTP 78700 and PMP 450i Connectorized
• Universal mounting on poles à˜ 25-76 mm (1-3 inches)
• Robust and durable structure
• Secure fixing even in difficult environmental conditions

PMP 450m is the first commercially available fixed wireless broadband platform of its kind capable of delivering Massive Multi-User MIMO (Multiple-Input, Multiple-Output) in a cost-effective solution. Massive MU-MIMO technology delivers innovative spectral efficiency in a highly integrated package, all managed from a single cloud control panel with cnMaestro. The PMP 450m access point, thanks to cnMedusa's Massive MU-MIMO technology, enables network operators to quickly provide faster Internet connections to a significantly greater number of people, places, and things.

Key Features of the PMP 450m Access Point with cnMedusa Technology

• 90° Sector Antenna Array with Integrated Beam-Forming
• Physical Layer: 14x14 Multi-User MIMO OFDM
• Integrated Radio with a Single Cable Connection
• Higher Capacity: Usable Throughput of Over 400 Mbps per Sector, Communication with Seven SMs Simultaneously
• Industry-Leading Spectral Efficiency: The PMP 450m Access Point provides over 400 Mbps throughput in a 20 MHz channel (20+ bps/Hz, and over 40 bps/Hz when installed in frequency reuse configurations)
• Investment Protection: The PMP 450m Access Point is fully Compatible with PMP 450 subscriber modules in existing networks.

The Cambium Networks 450 platform increases its performance with the addition of the 450b subscriber and backhaul module.

Ultra-wideband radio: 4.9 GHz to 5.925 GHz.

Capacity of up to 300 Mbps in a 40 MHz channel.

Can function as a Point-to-Point (PTP) link or as a subscriber module (SM).

Main Features

The gigabit Ethernet interface guarantees the device maximum transfer speeds.

The presence of a 3.5 mm audio jack allows direct connection of headphones without the need for adapters.

The new System on a Chip (SoC) increases packet processing power more than 4 times compared to the 450 SM.

Can use existing Offset Reflector antennas.

The Cambium Networks 450b Retro Module (C050045B104B) is a high-performance radio designed for flexible wireless deployments in the 4.9-5.925 GHz band. It can operate as both a Subscriber Module (SM) and a Point-to-Point Link (PTP), offering throughput up to 300 Mbps aggregated in 40 MHz channels. 2-2 MIMO OFDM technology and adaptive modulations up to 256QAM ensure stable connections and high performance even in harsh environments.

The device features a Gigabit Ethernet interface, AES 128/256-bit encryption, and full management via cnMaestro for centralized configuration and monitoring. Mechanically and environmentally, it offers IP55 protection, resistance to winds of up to 200 km/h, and an operating range of -40°C to +60°C. With a typical power consumption of 9W and a peak of 12W, it ensures energy efficiency and continuous reliability. An ideal solution for operators and integrators looking for a versatile and robust module for medium- to long-range wireless networks.

• Operating band: 4.9 - 5.925 GHz
• Operation as SM or PTP
• Channel width: 5 / 10 / 15 / 20 / 30 / 40 MHz
• Throughput up to 300 Mbps aggregate
• Adaptive modulations up to 256QAM
• 100/1000 Base-T full duplex Ethernet interface
• IP55 protection, operating range -40 °C à· +60 °C
• Typical consumption 9 W, maximum 12 W
• Wind resistance up to 200 km/h
• AES 128/256 bit encryption, management via cnMaestro

The Cambium Networks PMP 450 platform increases performance with the addition of the PMP 450b subscriber module.

With the PMP 450b subscriber module, ultra-wideband radios support the entire 4.9 to 5.9 GHz band, and the gigabit Ethernet interface ensures the device's maximum transfer speeds. The module features a 3.5 mm audio jack, allowing direct connection of headphones without adapters. The new System on a Chip (SoC) increases packet processing power more than four times that of the 450 SM, with an aggregation capacity of up to 250 Mbps in a 40 MHz channel.

The connectorized Cambium PTP 550 is a professional radio solution for point-to-point links in the 5 GHz band. Designed for reliability and high performance, it offers an aggregate capacity of up to 1.4 Gbps thanks to adaptive modulation technology and channel bonding support.

The device integrates advanced functions such as DSO (Dynamic Spectrum Optimization), which constantly analyzes the spectrum and chooses the least disturbed channels, and iOFDM (Intelligent Orthogonal Frequency Division Multiplexing), a modulation resilient to multi-path phenomena. These features make it suitable for critical applications such as backhaul for urban security, video surveillance, telecom operators and WISPs.

• Operating band: 5.150 - 5.850 GHz (5.400 GHz in Italy)
• Aggregate capacity up to 1.4 Gbps
• Channel widths: 20 / 40 / 80 MHz
• Channel bonding support for increased throughput
• DSO technology for automatic channel selection
• iOFDM modulation for multi-path resilience
• Connectorized version for use with external antennas
• Ideal for high-capacity wireless backhaul

The integrated Cambium PTP 550E is a professional point-to-point radio that combines power and reliability for high-performance wireless backhaul applications. Operating in the 4.9 GHz band, it supports throughput up to 1.4 Gbps thanks to the management of two independent channels up to 80 MHz each.

The radio features an integrated 23 dBi flat panel antenna and is housed in an IP66/67 metal enclosure, designed to withstand extreme environmental conditions. Advanced features include Dynamic Channel Selection (DCS), which automatically selects the most unoccupied channels, and a built-in spectrum analyzer for real-time monitoring without impacting data traffic. cnMaestro and TDD Sync support simplify management and integration into next-generation Cambium networks.

• Operating Band: 4.9 - 6.2 GHz
• Up to 1.4 Gbps Aggregate Throughput
• Integrated 23 dBi Flat Panel Antenna
• IP66/67 Weatherproof Metal Enclosure
• Channel Bonding with Channels up to 80 MHz
• Dynamic Channel Selection and Integrated Spectrum Analyzer
• cnMaestro Compatibility and TDD Sync Support
• Ideal for Mid-Range and Long-Range Links