Atel Antennas

The Atel Antennas railway combination antenna is designed for railway vehicles and integrates multiple connectivity into a single compact device. It supports TETRA/DVB T bands (380-470MHz), 2G/3G/4G cellular networks (700-960 and 1710-2700MHz), 2.4/5GHz dual-band Wi-Fi, and GPS-GNSS positioning system (1575.42MHz), providing comprehensive and reliable data, voice, and location communications.

The rugged, IP66-certified enclosure is made of self-extinguishing black ASA material, compliant with EN 50155 and EN 45545 railway standards. The device comes with five 5m RG 174 cables with SMA connectors (female for GPS). Gains range from 2dBi (TETRA) to 5dBi (Wi-Fi/LTE), while the active GPS module guarantees 26dB with 3-5V power supply. Installation is via a Ø38mm hole on roofs up to 4mm thick. Operating range -40°C to +85°C.

Main Features

• Bands: TETRA/DVB T 380-470MHz, 2G/3G/4G 700-960/1710-2700MHz, Wi Fi 2.4/5GHz, GPS 1575.42MHz
• Gain: 2dBi (TETRA), up to 5dBi (LTE/Wi Fi), 26dB active (GPS)
• Polarization: vertical / RHCP (GPS)
• VSWR: <2.5 for all bands
• Impedance: 50?
• Connectors: 5 SMA (1 female for GPS)
• Cables: 5 x RG 174, length 5m
• Materials: radome in self-extinguishing black ASA
• Protection degree: IP66
• Certifications: EN 50155, EN 45545
• Installation: hole Ø38mm, max thickness 4mm
• Operating temperature: -40°C à· +85°C

The Atel-Antennas VHF/UHF collinear mobile antenna is designed to operate in the frequency ranges from 140 to 174 MHz and from 400 to 470 MHz. The configuration includes a 1/4 wave mobile antenna for the VHF band and a collinear mobile antenna for the UHF band, both with omnidirectional emission and vertical polarization.

The base is made of AISI 302 stainless steel and integrates a 5 m long RG 58 coaxial cable. The mast features a single section and adjustable elevation from 45 to 90 degrees.

Key Features

• VHF frequency range from 140 to 174 MHz
• UHF frequency range from 400 to 470 MHz
• 1/4 wave VHF mobile antenna
• Collinear UHF mobile antenna
• 50 Ohm impedance
• 2.14 dBi gain
• VSWR less than 2.0
• Omnidirectional emission
• Vertical polarization
• 50 W maximum power in VHF
• 100 W maximum power in UHF
• Mast elevation from 45 to 90 degrees
• Cable 5m RG 58 coaxial cable with 100pF/m capacitance
• AISI 302 stainless steel base
• 60 Shore Kraton G7720 gasket
• 40mm high base with a diameter of 43mm
• 24mm diameter mounting hole
• Net weight 200g
• Operating temperature -40 to 80°C

The Atel Antennas mobile antenna is designed for the UHF band 375-480MHz, with a 1/4 configuration, 50? impedance, and 2.14dBi gain. It supports power up to 20W with a VSWR of less than 1.9, ensuring efficient and stable transmissions. The emission is omnidirectional with vertical polarization, ideal for applications on vehicles and M2M environments.

The 145mm rod is made of polypropylene reinforced with 30% glass fiber, while the compact base (Ø33.5mm x h27mm) in Hytrel guarantees robustness and durability. The integrated male FME connector facilitates installation on mobile vehicles. The antenna is operational over an extended temperature range of -40°C to +80°C, making it suitable even for professional environments exposed to harsh climatic conditions. Weighing only 55g, it offers high performance in a lightweight and compact format.

Main Features

• UHF Band: 375-480MHz
• Type: 1/4
• Impedance: 50?
• Gain: 2.14dBi
• Max Power: 20W
• VSWR: <1.9
• Polarization: vertical, omnidirectional emission
• Rod: PP with 30% glass fiber, length 145mm
• Base: Hytrel, Ø33.5x27mm
• Connector: FME male
• Weight: 55g
• Operating Temperature: -40°C à· +80°C

The Atel Antennas active low profile antenna is designed for GPS GLONASS Galileo applications, operating on the frequencies 1575.42MHz and 1600MHz. Powered between 3 and 5V, it provides a gain of 23dB at 2.7V or 25dB at 5V, with a noise figure between 1.8 and 2.2dB. The impedance is 50?, with VSWR <2 and RHCP polarization, for precise and stable reception.

The compact and resistant structure (Ø73x22mm) is made with a polyamide 6 cap and a black zamak base, with a weight of 140g. It can be installed on sheets up to 4mm thick via a 15.4x15.4mm square hole or a Ø16mm round hole. The IP65 rating ensures resistance to dust and splashes. Ideal for vehicular or industrial applications, it operates from -30°C to +80°C.

Main features

• Bands: GPS GLONASS Galileo 1575.42&1600MHz
• Gain: 23dB (2.7V) / 25dB (5V)
• Noise figure: 1.8-2.2dB
• VSWR: <2.0
• Polarization: RHCP
• Impedance: 50?
• Power supply: 3-5V
• Materials: polyamide 6 cap, zamak base
• Dimensions: Ø73x22mm
• Weight: 140g
• Mounting: 15.4x15.4mm square hole or Ø16mm round hole (max thickness 4mm)
• Protection degree: IP65
• Operating temperature: -30°C à· +80°C

The 380-430 MHz TETRA magnetic antenna from Atel-Antennas is a mobile solution designed for TETRA radio applications requiring electrical reliability and easy installation. The quarter-wave configuration allows for stable performance across the intended frequency band, while the magnetic base allows for quick attachment to metal surfaces without permanent modifications.

The antenna operates at 50 Ohm impedance, offers a gain of 2.14 dBi, and supports a maximum power output of 20 W. A V.S.W.R. of less than 1.8 contributes to efficient signal transmission. The materials used for the base and whip are selected to ensure robustness and durability over time in professional environments.Main Features

• Quarter-wave mobile antenna for TETRA systems
• Operating frequency 380-430 MHz
• Gain 2.14 dBi
• V.S.W.R. less than 1.8
• Impedance 50 Ohm
• Maximum power 20 W
• Magnetic base with 85 mm diameter and 50 mm height
• Whisk length 130 mm with 15 mm tolerance
• Weight 260 g
• Cable and connector available upon request

The Atel Antennas 3x3 MIMO dual-band antenna is designed to cover the 2.4-2.5GHz and 4.9-5.925GHz Wi-Fi bands, ideal for high-performance wireless networking solutions. With a standard 50? impedance and a VSWR of less than 2, it ensures high connection reliability.

Constructed with three elements in a MIMO configuration, it offers a maximum gain of 4.5±1dBi and an average gain of -2±0.5dBi. The antenna is omnidirectional, with vertical polarization, and can handle up to 3W of power. It is equipped with a 100mm long 1.13mm coaxial cable with a standard IPEX connector and a 3M6677 adhesive tape fastening system.

Compact and versatile, it has a length of 50mm and a radiator thickness of 0.15mm, with a weight of only 1.8g. Designed for indoor or protected outdoor use, it operates in a range of -40°C to +85°C.

Main Features

• Bands: 2.4-2.5GHz and 4.9-5.925GHz
• Configuration: 3x3 MIMO
• Impedance: 50?
• VSWR: <2.0
• Maximum Gain: 4.5±1dBi
• Average Gain: -2±0.5dBi
• Radiation: Omnidirectional
• Polarization: Vertical
• Maximum Power: 3W
• Cable: 1.13mm coaxial, 100mm
• Connector: IPEX 20278 112R 13
• Dimensions: 50mm x 0.15mm
• Weight: 1.8g
• Mounting: 3M6677 adhesive
• Operating temperature: -40°C à· +85°C

Designed for the TETRA/UHF 380-430MHz band, the Atel Antennas mobile antenna with a 1/4 configuration ensures reliable transmissions in mobile professional environments. With 50? impedance and 2.14dBi gain, it supports up to 20W of power with a VSWR of less than 2.0.

Radiation is omnidirectional with vertical polarization, ideal for uniform coverage. The body is made of polyamide 6 with a Pibiflex 4612 rod and gasket, offering mechanical resistance and lightness. The base measures 64x46mm and the weight is 80±20g. Installation takes place on sheet metal up to 4mm through a 15x15mm square hole or a Ø19mm round hole.

The antenna is optimized for professional vehicular environments and guarantees functionality even in critical environmental conditions, with operating temperatures between -30°C and +80°C.

Main features

• Band: TETRA/UHF 380-430MHz
• Type: 1/4 vehicular
• Impedance: 50?
• Gain: 2.14dBi
• Max power: 20W
• VSWR: <2.0
• Polarization: vertical, omnidirectional
• Materials: Pibiflex 4612, polyamide 6
• Base: 64 x 46mm
• Weight: 80±20g
• Mounting: 15x15mm or Ø19mm hole, sheet metal ‰¤4mm
• Operating temperature: -30°C à· +80°C

p>The Atel Antennas active magnetic antenna is designed for use with GPS GLONASS Galileo systems, covering the frequencies 1575.42MHz and 1600MHz. Powered at 3 5V, it guarantees good performance with a gain of 23dB at 2.7V or 25dB at 5V, maintaining a noise figure between 1.8 and 2.2dB, ideal for precise positioning applications.

Constructed of black ABS and equipped with a magnetic base, it is robust and compact (33.2x31.5x13.5mm), weighing only 50g. The 5m RG 174 cable with male SMA connector facilitates installation on vehicles or metal surfaces. RHCP polarization and VSWR less than 2.0 ensure stability and reliability even in harsh environments, with operating temperatures from -30°C to +80°C.

Main Features

• Type: Magnetic active patch antenna
• Bands: GPS GLONASS Galileo 1575.42 & 1600MHz
• Impedance: 50?
• Gain: 23dB (2.7V) / 25dB (5V)
• Noise figure: 1.8-2.2dB
• Polarization: RHCP
• VSWR: <2.0
• Power supply: 3-5V, consumption 10mA (2.7V) or 20mA (5V)
• Cable: RG 174, length 5000mm
• Connector: SMA male
• Material: ABS, black color
• Dimensions: 33.2x31.5x13.5mm
• Weight: 50g
• Operating temperature: -30°C à· +80°C

The 2G/3G/4G/5G 5 dBi omnidirectional antenna is designed for multi-standard applications and covers ISM, GSM, DCS, PCS, UMTS, WiFi, Bluetooth, LTE, and 5G bands. Atel-Antennas offers it with omnidirectional emission, vertical polarization, and 5 dBi gain, for installations requiring coverage over a wide frequency spectrum from 698 MHz to 3.8 GHz.

The structure is made of ABS, PVC, and MOPLen, is gray, weighs 380 g, and measures 340 x 50 mm with a height of 155 mm. The product supports wall or pole mounting, 50 Ohm impedance, 10 W maximum power, 5000 mm CO100 cable and SMA male connector or available on request.

Main Features

• Omnidirectional antenna for 2G, 3G, 4G and 5G networks.
• Supported frequency range: ISM 868 MHz, GSM 900 MHz, DCS 1800 MHz, PCS 1900 MHz, UMTS 2.1 GHz, WiFi and Bluetooth 2.4 GHz, LTE 698-860 MHz and 2500-2710 MHz, 5G 3400-3800 MHz.
• 5 dBi gain with vertical polarization.
• Omnidirectional emission.
• Impedance of 50 Ohm and maximum power of 10 W.
• V.S.W.R. up to less than 2 or less than 2.5 depending on the band.
• 5000 mm CO100 cable.
• SMA male connector or on request.
• Wall or pole mounting.
• ABS, PVC and MOPLen materials, gray color, weight 380 g.

The Atel Antennas vehicle shark antenna combines LTE connectivity (790-960MHz / 1710-2700MHz), dual-band Wi Fi (2.4-2.485GHz and 5.25-5.85GHz), and GPS GNSS/Galileo satellite positioning (1580MHz ±28MHz) in a single device. Thanks to its compact and aerodynamic configuration, it is ideal for vehicles requiring integrated solutions and reliable performance.

The LTE and Wi Fi sections offer 2.14dBi gain with VSWR <3.3 and <3.0 respectively. The active GPS module provides 18dB gain at 2.7V or 22dB at 5V, with a noise figure between 1.7 and 2.1dB and VSWR <2.0. The antenna is made of polyamide 6 with Arnitel EM400 gasket, measures 95 x 52 x 65mm and weighs 150g. It is designed for mounting on sheet metal (max 4mm) via a 15x15mm square hole or Ø19mm round hole.

Each section is equipped with a male SMA connector: RG 316 (LTE), RG 174 (Wi Fi and GPS), length 180mm. The antenna is designed to operate in harsh environmental conditions, with a temperature range of -40°C to +85°C.

Main Features

• LTE Bands: 790-960 / 1710-2700MHz
• Wi-Fi Bands: 2.4-2.485GHz / 5.25-5.85GHz
• GPS Band: 1580±28MHz
• Gain: 2.14dBi (RF), 18-22dB (GPS active)
• GPS Noise Figure: 1.7-2.1dB
• VSWR: <3.3 (LTE), <3.0 (Wi-Fi), <2.0 (GPS)
• Polarization: Vertical (RF), RHCP (GPS)
• Impedance: 50?
• Max power: 20W (RF)
• Connectors: 3x SMA male
• Cables: RG 316 (LTE), RG 174 (Wi Fi/GPS), 180mm
• Materials: polyamide 6, Arnitel EM400
• Mounting: 15x15mm or Ø19mm hole, max 4mm sheet metal
• Dimensions: 95 x 52 x 65mm
• Weight: 150g ±20g
• Operating temperature: -40°C à· +85°C

The Atel Antennas 1/4 mobile antenna operates in the VHF band 130-230MHz, with 50? impedance and peak power up to 50W. It offers 2.14dBi gain, omnidirectional emission and vertical polarization, ensuring wide coverage and stable performance with VSWR <1.5 at ±6% F‚€ :contentReference[oaicite:4]{index=4}.

The 500mm rod is made of Pibiflex 2564 (extendable to 74°), with a polyamide 6 cap and Pibiflex 50 gasket. The compact base (64x46mm) is equipped with holes for mounting on a square (15x15mm) or round (Ø19mm) bracket. Lightweight (110g) and durable, it operates in a range from -30°C to +80°C. Connector and cable length available upon request, ideal for vehicle installations. :contentReference[oaicite:5]{index=5}

Main Features

• Type: 1/4 VHF mobile antenna
• Band: 130-230MHz
• Impedance: 50?
• Maximum power: 50W (peak)
• Gain: 2.14dBi
• Polarization: vertical, omnidirectional emission
• VSWR: <1.5 at ±6% F‚€
• Rod: Pibiflex 2564, length 500mm, elevation 74°
• Cap: polyamide 6; gasket: Pibiflex 50
• Structure: 64x46mm base
• Mounting: 15x15mm square hole or Ø19mm round hole
• Weight: 110g
• Operating temperature: -30°C à· +80°C
• Connector and cable on request

Designed for multi-band LTE applications, the Atel Antennas directional antenna covers three frequency ranges: 680-790MHz, 790-960MHz and 1710-2700MHz. With 10dBi gain, 50? impedance and 50W maximum power, it guarantees high performance in outdoor mobile communications. The VSWR is less than 2.0 in the lower band and <1.5 in the other two, ensuring optimal transmission efficiency.

The polarization is vertical with directional emission. The gray ABS body withstands harsh environmental conditions, with operating temperatures from -30°C to +80°C and wind resistance up to 120km/h. The dimensions are 162x142x45mm and the low weight facilitates installation.

It is equipped with a 5m cable (type CO100mm) and a male SMA connector. It can be mounted on poles with a diameter of Ø20 to Ø55mm, or on walls, making it suitable for multiple LTE usage scenarios.

Main features

• LTE bands: 680-790 / 790-960 / 1710-2700MHz
• Impedance: 50?
• Gain: 10dBi
• Max power: 50W
• VSWR: <2.0 (680-790MHz), <1.5 (other bands)
• Polarization: vertical
• Emission: directive
• Connector: SMA male
• Cable: 5m (CO100mm)
• Material: grey ABS
• Dimensions: 162 x 142 x 45mm
• Wind resistance: 120km/h
• Operating temperature: -30°C à· +80°C
• Mounting: on a Ø20-55mm pole or on a wall