Amphenol Procom

The Amphenol-Procom 32/50 mm cross clamp is a fastening solution for mounting a 32 mm diameter antenna mast or boom to a 50 mm diameter mounting tube. Designed for light-duty applications, it combines ease of installation and robust construction thanks to the galvanized steel clamp body and stainless steel fixings.

Main Features

• Type: cross clamp
• Application: fastening a 32 mm antenna mast or boom to a 50 mm mounting tube
• Tube diameter 1: 32 mm
• Tube diameter 2: 50 mm
• Galvanized steel clamp body
• Stainless steel fixings
• Suitable for light-duty applications

The side mounting 15-65 mm 1.0 m bracket from Amphenol-Procom is designed for the side mounting of base station antennas on support masts or pole tubes. This version of the SMC 1000 series offers a lateral distance of approximately 1.0 m and is suitable when the antenna needs to be installed to the side of the support.

The model with code 100000045 is supplied with 2 65 mm U-bolts, 8 M8 nuts and 4 washers, and is compatible with poles with diameters between 15 and 65 mm. The bracket structure is made of hot-dip galvanized steel, while the fixing accessories are made of stainless steel.

Amphenol-Procom indicates these brackets primarily for omnidirectional antennas with type C or LW clamp, but they can also be used with GP antennas for 38 mm pole tubes or for the support of directional antennas. The side mounting of an omnidirectional antenna can influence the radiation pattern and the SWR value depending on the distance from the mast and the diameter of the support.

From a mechanical point of view, the bracket has a stand-off distance of approximately 1025 mm, a wind area of ??0.046 m2, a wind load of 58 N at 160 km/h and a weight of approximately 4.7 kg.

Main features

• Bracket for side mounting of base station antennas on masts or pole tubes.
• Side distance of approximately 1.0 m.
• Compatible with masts with a diameter of 15 to 65 mm.
• Supplied with 2 65 mm U-bolts, 8 M8 nuts and 4 washers.
• Hot-dip galvanized steel structure and steel fixing accessories stainless steel.
• Mainly suitable for omnidirectional antennas with type C or LW clamps.
• Also usable with GP antennas for 38 mm mast tubes or for directional antennas.
• Stand-off of approximately 1025 mm, wind area of ??0.046 m2 and wind load of 58 N at 160 km/h.
• Weight of approximately 4.7 kg.

The side mounting 15-65 mm 0.5 m bracket from Amphenol-Procom is a solution for side-mounting base station antennas on support masts or pole tubes. This version belongs to the SMC 500 series and offers a lateral distance of approximately 0.5 m, making it suitable when the antenna needs to be installed to the side of the support.

The product is compatible with poles with diameters between 15 and 65 mm and is supplied with two 65 mm U-bolts, eight M8 nuts, and four washers. The structure is made of hot-dip galvanized steel, while the fixing accessories are made of stainless steel.

Amphenol-Procom indicates these brackets mainly for omnidirectional antennas with type C or LW clamps, but they can also be used with GP antennas for 38 mm pole tubes or to support directional antennas.

From a mechanical point of view, the SMC 500 version has a stand-off distance of approximately 570 mm, a wind area of ??0.027 m2, a wind load of 34 N at 160 km/h and a weight of approximately 3.6 kg.

Main features

• Bracket for lateral mounting of base station antennas on masts or pole tubes.
• Compatible with pole diameters from 15 to 65 mm.
• Lateral distance of approximately 0.5 m, with stand-off of approximately 570 mm.
• Supplied with 2 65 mm U-bolts, 8 M8 nuts and 4 washers.
• Hot-dip galvanized steel structure and stainless steel hardware.
• Suitable for omnidirectional antennas with type C or LW clamp, also usable with GP antennas or directional antennas.
• Wind area of ??0.027 m2 and wind load of 34 N at 160 km/h.
• Weight of approximately 3.6 kg.

The 30/78 mm parallel clamp is designed for securely attaching CXL antennas with SL-Bracket to vertical poles or masts. Amphenol-Procom supplies it with stainless steel bolts suitable for poles with diameters from 30 to 78 mm, offering a robust solution for professional applications.

The structure uses a zinc-plated steel clamp body with A2 / 304 stainless steel fixings. Two sets of clamps are included in the kit, with a maximum M12 torque of 59-66 Nm and an approximate weight of 2.67 kg.

Main Features

• Parallel clamp type
• For fixing CXL antennas with SL-Bracket on a vertical pole or mast
• Compatible with poles from 30 to 78 mm
• Zinc-plated steel clamp body
• A2 / 304 stainless steel fixings
• Two sets of clamps included in the kit
• Tube 1 size: 70 mm
• Maximum M12 torque: 59-66 Nm
• Approximate weight: 2.67 kg

The Amphenol-Procom ATEX Grounding Kit is a universal accessory designed to ensure equipotential bonding when ATEX antennas are installed at points with a different electrical potential than the mains. It is compatible with LW-SS, LW-SS-1" brackets, and C-brackets used in ATEX antenna models.

Constructed entirely of AISI316 stainless steel, the kit includes a 2m wire, spring washer, M6x8mm bolt, eyelet, and two cable clamps. For the LW-SS brackets, two M6 washers and an M6 nut are added; for the C-brackets, two M6 washers and an M8 nut. The total weight of the kit is approximately 0.15kg.

Main features

• Application: equipotential bonding of ATEX Procom antennas
• Material: AISI316 marine stainless steel
• Contents: 2m wire, bolts (M6x8mm), eyelet, washers, cable clips; M6 or M8 nuts depending on the bracket
• Weight: approximately 0.15kg
• Compatibility: LW-SS, LW-SS-1€³ brackets and C-brackets

The 1 m FME from Amphenol Procom is a 1 m RG 58 coaxial cable designed to ensure stable and secure RF connections. It features an FME connector mounted on both ends, making it suitable for installations requiring FME connections on both sides of the link.

Thanks to its pre-assembled configuration, the cable allows for simple and immediate integration into radio systems and professional applications using RG 58 cable.

Main Features

• Length 1 m
• RG 58 coaxial cable
• FME connector mounted on both ends
• Ready-to-use configuration

The 4m RG58 Low Loss cable with FME(f) connectors mounted on both ends, model 130000466, is an Amphenol-Procom product designed for professional RF applications. It uses specially designed RG58 A/U-L to reduce losses to less than 0.5dB/m at 900MHz while maintaining a precise 50? characteristic impedance. The FME connectors are optimized for low SWR and high power transfer efficiency. The cable is ideal for connections with radios such as DM1000, DM2000, DM4000, NX 3720/3820, NX 5700/5800 and TK D740E/TK D840E.

Key Features

• RG58 A/U L Low Loss cable, losses < 0.5dB/m at 900MHz
• Precise 50? characteristic impedance with continuous quality control
• Dual FME female connector, low SWR
• Length 4m, suitable for vehicles and mobile RF installations
• Compatibility: DM1000, DM2000, DM4000, NX 3720/3820, NX 5700/5800, TK D740E/TK D840E

The 5 meter RG 58 A/U L FME cable is a low-loss coaxial assembly developed by Amphenol for mobile RF applications or installations where signal quality is critical. Featuring male FME connectors at both ends, this cable uses a braided tinned copper core construction and high coverage shielding, ensuring a loss of less than 0.5 dB per meter at a frequency of 900 MHz. The characteristic impedance is 50 Ohms, with a low SWR for optimal power transfer.

Main Features

• Type: RG 58 A/U L cable with pre-assembled male FME connectors
• Length: 5 meters
• Loss: less than 0.5 dB/m at 900 MHz
• Impedance: 50 Ohms
• Quality Control: Continuous and automated
• Low SWR: better matching and power transfer

The 10m RG58 Low Loss coaxial cable with female FME connectors mounted on both ends is a high-quality solution for mobile RF links. Designed with special materials and continuous testing, it guarantees a precise 50? impedance and losses of less than 0.5dB/m at 900MHz, ensuring efficient power transfer and optimal matching.

The Amphenol-Procom FME Male to BNC Male Adapter Connector (PN 130000566) allows you to connect an FME-terminated cable to devices or patch panels with a male BNC connector. It maintains 50? impedance and is part of the FME-Connector Accessory Series, offering compatibility and easy integration into mobile and vehicular RF systems.

Key Features

• Adapter Type: FME Male †’ BNC Male
• Nominal Impedance 50?
• Compatible with FME Series cables and systems
• Perfect for mobile and vehicular RF installations
• Product Code: 130000566

The FME to Mini UHF Male Elbow Adapter is designed to facilitate the interconnection of FME cables in compact environments or mobile installations where space is limited. The elbow configuration allows for an oriented cable exit, improving cable management. It is compatible with the Amphenol Procom FME cable system and ensures compliance with RoHS and REACH environmental regulations.

Key Features

• Type: FME to Mini UHF Male Elbow Adapter
• Impedance: 50 Ohm
• Compatibility: Amphenol Procom FME cable system
• Product Code: 130000582
• Compliance: RoHS and REACH
• Ideal for: Mobile applications and installations in restricted spaces

The Amphenol-Procom EFD200R/l-TNC(m) antenna is a 1/2 end-fed dipole specifically designed to operate in the VHF band from 150 to 215MHz. Thanks to its ground-plane independent design, it is perfect for use with portable radios, ensuring high performance even in mobile installations.

Compared to a 1/4 whip, it offers a gain of approximately 3dB, with VSWR <1.3:1 in the resonance range and a bandwidth ‰¥15MHz. The radiator is made of stainless steel and chrome-plated brass for strength and elasticity, while maintaining a low weight (~0.15kg). It features a male TNC connector compatible with many portable devices.

Main Features

• Operating Frequency: 150-215MHz
• Type: 1/2 end-fed portable dipole
• Gain: approx. 3dB vs. 1/4 whip
• Polarization: vertical
• VSWR: <1.3:1 at resonance
• Bandwidth: ‰¥15MHz (VSWR ‰¤2.0)
• Impedance: 50?
• Maximum Power: 25W
• Connection: TNC male
• Materials: stainless steel, chrome-plated brass
• Height: approx. 1300mm
• Weight: approx. 0.15kg