EnergyStock
1,344 Wh UPS Standalone Power Supply Unit
The 1,344 Wh UPS standalone power supply unit is designed to provide power continuity in applications where system reliability is critical. With this solution, EnergyStock offers a highly efficient power supply unit with a 1,344 Wh LiFePO4 battery and a microprocessor-based BMS, designed to power loads even during prolonged power outages and to operate both as a UPS and in streetlight mode.
The structure integrates an air extraction system with a 60 mm fan driven by an internal temperature probe and managed by a microprocessor, dust filters, external stainless steel filters, and air inlet and outlet chimneys complete with insect screens. The cabinet is equipped with a key lock, IP65 protection rating, IP44 ventilated and IK10 resistance.
This unit is suitable as a backup for cameras that must always remain operational in the absence of the main power supply, for example in license plate reading systems, sanctioning systems, high-security video surveillance and traffic control. Standard alarm outputs are also available for low battery level, fan stop and 230 Vac power failure, as well as a serial output and DIN rail for mounting accessories up to 17 modules.
Main features
- 1,344 Wh LiFePO4 battery
- Over 2,000 charge and discharge cycles with 80% DoD
- Lamppost cycle operation
- Also functions as a UPS on battery output
- Microprocessor BMS
- Input 90-264 Vac
- Output 12.2-14.7 Vdc
- 60 mm fan with air exchange of 44.62 m3/h
- 7 M20x1.5 cable glands with IP68 protection
- External filters Stainless steel
- Operating temperature from -20 °C to +55 °C
- Dimensions 350 x 446 x 205 mm
- Weight 18 kg plus pole support
- Protection rating IP65, IP44 ventilated and insulation compliant with Class II
- Maximum load for street lamp use 75 W with 17 hours of light
- Recharging time 8 h 10 m with 20 A power supply and 75 W load
- Maximum load for UPS use 150 W
- Autonomy up to 8 h 28 m
- Recharging time 12 h 03 m with 20 A power supply and 150 W load
- Standard alarm outputs and serial output available
- DIN rail for accessories up to 17 modules
100mm stainless steel pole support
The stainless steel pole mount for EnergyStock ES020 series units is an accessory designed for pole installation of EnergyStock family units. The stainless steel structure makes it suitable for dedicated mounting of ES020 units, with indications for use on poles with a minimum diameter of 100 mm.
Within the EnergyStock range, this support offers a specific solution for fixing EnergyStock ES020 series units. For pole mounting, the use of 1/2" Band-IT tape or similar is recommended.
Main features- Stainless steel pole mount
- Compatible with EnergyStock ES020 series units
- Installation on poles with a minimum diameter of 100 mm
- For pole mounting, 1/2" Band-IT tape or similar is recommended
- EnergyStock family accessory
DC/DC converter for power supply unit
The DC/DC converter for power supply units is an accessory from the EnergyStock family designed for integration into dedicated units. It offers 100 W of power, with an input voltage of 9 to 18 Vdc and an output voltage of 48 Vdc at 2.1 A, making it suitable for applications requiring power conversion in specific contexts.
The EnergyStock solution supports DIN rail mounting and is supplied assembled and wired in the units, simplifying installation. Extended operating temperature from -40°C to 70°C allows for use in environments with harsh operating conditions.
Main Features- 100 W DC/DC converter.
- Input voltage 9-18 Vdc.
- Output voltage 48 Vdc / 2.1 A.
- Extended operating temperature from -40°C to 70°C.
- DIN rail mounting support.
- Supplied assembled and wired in EnergyStock units.
- Accessory of the EnergyStock family.