MikroTik

This 24V 2.5A high-power power supply from MikroTik is recommended for long cable runs using multiple high-power wireless cards. It supports 100/240V input voltage and comes with a power plug.

Key Features

• Output Voltage: 24V
• Output Current: 2.5A
• Input Voltage: 100/240V
• Input Current: 1.6A
• MTBF of approximately 100,000 hours at 25°C
• Recommended for long cable runs and multiple high-power wireless cards
• IEC cable included

The MikroTik power supply provides an output voltage of 48 V, a current of 1.46 A, and a power of 70 W. It supports an input voltage of 110/220 V and comes with a power plug.

An MTBF value of approximately 100,000 hours at 25 °C ensures long-lasting operation.

Key Features

• Output voltage of 48 V
• Output current of 1.46 A
• Power of 70 W
• Input voltage of 110/220 V
• MTBF of approximately 100,000 hours at 25 °C
• Power plug included

The MikroTik indoor case is a black aluminum solution compatible with the RBM11G, RB411, RB911, RB912, and RB922 series. Interchangeable front panels allow you to configure the case based on the installed device.

The increased internal height allows for the installation of high-power wireless cards, while the holes on the back facilitate wall mounting.

Key Features

• Compatibility with the RBM11G, RB411, RB911, RB912, and RB922 series
• Black aluminum structure
• Designed for indoor use
• Interchangeable front panels
• Height suitable for high-power wireless cards
• Rear holes for wall mounting

The Cloud Core Router is a MikroTik industrial router designed to handle millions of packets per second. The 1U rackmount design integrates 12 Gigabit Ethernet ports, a 1.2 GHz 16-core CPU, 2 GB of RAM, and a color touchscreen LCD display.

The device achieves throughput of up to 12 Gbps and FastPath performance of up to 17.8 million packets per second. The presence of two AC inputs and dual power supplies promotes continuous operation, while RouterOS 6 with license is pre-installed and makes the router ready to use.

Key Features

• 1U rackmount form factor with dimensions of 443 x 193 x 44 mm.
• 12 10/100/1000 Ethernet ports.
• 16-core, 16-thread TILE CPU with a nominal frequency of 1.2 GHz.
• 2 GB of RAM and 512 MB NAND memory.
• Throughput up to 12 Gbit/s.
• FastPath performance up to 17.8 million packets per second.
• Color touchscreen LCD display.
• Dual AC inputs from 100 to 240 V and dual redundant power supplies.
• Maximum power consumption of 42W and dual-fan cooling.
• RJ45 serial console port and USB Type-A port.
• CPU and PCB temperature monitoring.
• Pre-installed RouterOS 6 license.
• Ambient temperature tested from -20°C to 60°C.
• IP20 rating.

The MikroTik Cloud Router Switch is a desktop smart switch designed to connect up to six SFP devices. The five 1.25 Gbps SFP ports and the combo port, which can be used as either Gigabit Ethernet or SFP, offer flexibility in network configuration.

The 400 MHz single-core CPU and 128 MB of RAM support RouterOS with L5 license. The operating system is pre-installed and the device is ready to use out of the box, while power supply via DC jack or passive PoE makes installation easy.

Key Features

• Five 1.25 Gbps SFP ports.
• One Gigabit Ethernet or SFP combo port.
• Support for up to six SFP devices.
• Single-core 400 MHz CPU.
• 128 MB RAM.
• 16 MB Flash memory.
• RouterOS operating system with L5 license.
• Two DC inputs via jack and PoE-IN.
• Passive PoE with input voltage from 11 to 30 V.
• Maximum power consumption of 11 W.
• Passive cooling.
• Serial console port RJ45.
• Dimensions: 114 x 137 x 29 mm.
• Tested ambient temperature: -20°C to 70°C.
• IP20 protection rating.
• Power supply included.

The MikroTik 1-Port Gigabit 10 SFP+ Smart Switch combines the functions of a router with those of a Layer 3 switch. It integrates one Gigabit Ethernet RJ45 port, ten SFP slots, and one 10G SFP+ slot, offering versatile configurations for network connectivity.

The RouterOS Level 5 system provides a dedicated menu for switch configuration. Ports can also be removed from the switching configuration and used for routing. The device has a metal desktop case for indoor environments and can be rack-mounted using the provided brackets.

Main Features

• One RJ45 Gigabit Ethernet port.
• Ten SFP slots.
• One 10G SFP+ slot.
• Layer 3 router and switch functions.
• RouterOS Level 5 operating system.
• 400 MHz processor.
• 64 MB RAM.
• Integrated LCD display.
• RJ45 serial port.
• Metal desktop case for indoor environments.
• Rack-mount brackets included.
• Power supply included.

This MikroTik desktop switch combines Ethernet and SFP+ connectivity in a compact, fanless metal case, ensuring quiet operation. Dual boot support allows you to choose between SwOS, dedicated to switching functions, and RouterOS, also suitable for routing and Layer 3 functions.

The availability of two DC inputs and PoE-IN offers greater installation flexibility and allows for the provision of redundant power supplies. The operating system is pre-installed and licensed, making the device ready to use out of the box.

Key Features

• Four Gigabit Ethernet ports.
• One SFP+ port.
• Dual boot with RouterOS and SwOS.
• 800 MHz dual-core 32-bit ARM processor.
• 512 MB RAM.
• 16 MB FLASH storage.
• Two DC jacks and PoE-IN power supply.
• Input voltage from 12 to 57 V.
• PoE-IN compliant with 802.3af and 802.3at standards.
• Maximum power consumption of 18 W.
• Maximum power consumption without accessories of 10 W.
• Passive cooling for a Silent operation.
• Compact metal case.
• Dimensions: 141 x 115 x 28 mm.
• Ambient temperature tested: -40°C to 70°C.
• IP20 protection rating.

Cloud Smart Switch 24 porte 1G 2 SFP+ è uno switch gestito che combina connettività wire speed e funzionalità avanzate in un formato rackmount 1U. Il sistema operativo SwOS di MikroTik permette di controllare l'inoltro tra porte, configurare VLAN, applicare filtri MAC, eseguire il mirroring del traffico e limitare la larghezza di banda.

Le 2 porte SFP+ supportano moduli SFP da 1,25 Gb e SFP+ da 10 Gb. Il raffreddamento passivo e i due ingressi di alimentazione tramite DC jack e PoE-IN passivo favoriscono un'installazione flessibile.

Caratteristiche principali

• 24 porte Ethernet 10/100/1000
• 2 porte SFP+ compatibili con moduli SFP da 1,25 Gb e SFP+ da 10 Gb
• Sistema operativo SwOS preinstallato e licenziato
• Connettività wire speed
• Gestione dell'inoltro tra porte
• Configurazione VLAN e filtri MAC
• Mirroring del traffico
• Limitazione della larghezza di banda
• Regolazione di alcuni campi delle intestazioni MAC e IP
• Formato rackmount 1U
• Dimensioni di 443 x 144 x 44 mm
• Alimentazione tramite DC jack o PoE-IN passivo
• Tensione di ingresso da 10 V a 30 V
• Consumo massimo di 19 W
• Raffreddamento passivo
• Temperatura ambiente testata da -20 °C a 70 °C
• Grado di protezione IP20

The wall-mounted 1G passive PoE injector allows you to power uplink devices through a PoE-out Ethernet port. Designed by MikroTik for the GPEN (Gigabit Passive Ethernet Network) concept, it is an easy-to-install Ethernet solution with a dedicated front panel label for the ISP.

The device integrates 2 10/100/1000 Ethernet ports, one of which has passive PoE output, and accepts an input voltage of 12 to 57 V. Passive cooling and tested operation from -40 C to 70 C favor its use in various environmental conditions.

Main Features

• Wall-mounted installation.
• 2 10/100/1000 Ethernet ports.
• 1 Gigabit Ethernet port with PoE-out.
• Passive PoE output on Ether2 port.
• PoE-out current limit of 2 A.
• Input via 12-57 DC jack V.
• Passive cooling.
• Ambient temperature tested from -40°C to 70°C.
• MTBF of approximately 100,000 hours at 25°C.
• Front ISP label space of 6.6 x 2.54 cm.
• CE, EAC and ROHS certified.

The MikroTik Passive Gigabit Ethernet Repeater allows you to extend an Ethernet link through additional hops, reaching a total distance of up to 1,500 m. It is a suitable solution for multi-story buildings and residential complexes with multiple floors or sections, where running very long Ethernet cables can be problematic.

The device integrates two 10/100/1000 Ethernet ports and supports 802.3af/at PoE-in and PoE-out. The maximum distance between the repeater and the power source or router using a CAT6 Ethernet cable is 100 m, extendable up to 150 m depending on the quality of the cable. The distance between two repeaters can reach 210 m. If the target device does not support PoE-in, PoE Passthrough can be disabled by manually removing the jumpers.

Key Features

• 2 x 10/100/1000 Ethernet ports.
• Extend the Ethernet link up to 1,500 m via additional hops.
• Distance up to 100-150 m to standard network devices.
• Distance up to 210 m between two repeaters.
• Supports 802.3af/at PoE-in with input voltage from 24 to 57 V.
• Supports 802.3af/at PoE-out.
• PoE-out current limit of 2 A at low voltage and 0.7 A at high voltage.
• PoE Passthrough can be disabled by manually removing the jumpers jumper.
• Ambient temperature tested from -40°C to 70°C.

The MikroTik IP67 outdoor enclosure for GPeR protects GPeR units in outdoor installations and the most demanding environments. Despite the IP67 rating, testing has shown it to be IP68-rated for dust and water immersion.

The rugged and affordable enclosure can be easily installed on walls and poles. It is suitable for safely extending the Ethernet network in mines, caves, maintenance pits and outdoor environments, with an MTBF of approximately 100,000 hours at 25 C.

Main Features

• Outdoor enclosure designed for GPeR units.
• IP68 protection rating.
• Protection against dust and immersion in water.
• Rugged and affordable structure.
• Easy installation on walls and poles.
• Suitable for mines, caves, maintenance pits and outdoor environments.
• MTBF of approximately 100,000 hours at 25 C.

This dual-band outdoor antenna from MikroTik supports the 2.4 and 5 GHz bands and features male RP-SMA connectors for screw-on mounting. Gain reaches 3.6 dBi on the 2.4 GHz band and up to 6.7 dBi on the 5 GHz band.

Installing two antennas on the NetMetal ax allows you to obtain a powerful dual-band access point for outdoor applications.

Key Features

• Dual-band support on the 2.4 and 5 GHz frequencies
• 3.6 dBi gain on the 2.4 GHz band
• Up to 6.7 dBi gain on the 5 GHz band
• RP-SMA male connectors
• Outdoor installation with screw-on mounting
• Possibility of using two antennas with the NetMetal ax