Atel-Antennas

The Atel Antennas railway combination antenna is designed for railway vehicles and integrates multiple connectivity into a single compact device. It supports TETRA/DVB T bands (380-470MHz), 2G/3G/4G cellular networks (700-960 and 1710-2700MHz), 2.4/5GHz dual-band Wi-Fi, and GPS-GNSS positioning system (1575.42MHz), providing comprehensive and reliable data, voice, and location communications.

The rugged, IP66-certified enclosure is made of self-extinguishing black ASA material, compliant with EN 50155 and EN 45545 railway standards. The device comes with five 5m RG 174 cables with SMA connectors (female for GPS). Gains range from 2dBi (TETRA) to 5dBi (Wi-Fi/LTE), while the active GPS module guarantees 26dB with 3-5V power supply. Installation is via a Ø38mm hole on roofs up to 4mm thick. Operating range -40°C to +85°C.

Main Features

• Bands: TETRA/DVB T 380-470MHz, 2G/3G/4G 700-960/1710-2700MHz, Wi Fi 2.4/5GHz, GPS 1575.42MHz
• Gain: 2dBi (TETRA), up to 5dBi (LTE/Wi Fi), 26dB active (GPS)
• Polarization: vertical / RHCP (GPS)
• VSWR: <2.5 for all bands
• Impedance: 50?
• Connectors: 5 SMA (1 female for GPS)
• Cables: 5 x RG 174, length 5m
• Materials: radome in self-extinguishing black ASA
• Protection degree: IP66
• Certifications: EN 50155, EN 45545
• Installation: hole Ø38mm, max thickness 4mm
• Operating temperature: -40°C à· +85°C

The Atel Antennas mobile antenna is designed for the UHF band 375-480MHz, with a 1/4 configuration, 50? impedance, and 2.14dBi gain. It supports power up to 20W with a VSWR of less than 1.9, ensuring efficient and stable transmissions. The emission is omnidirectional with vertical polarization, ideal for applications on vehicles and M2M environments.

The 145mm rod is made of polypropylene reinforced with 30% glass fiber, while the compact base (Ø33.5mm x h27mm) in Hytrel guarantees robustness and durability. The integrated male FME connector facilitates installation on mobile vehicles. The antenna is operational over an extended temperature range of -40°C to +80°C, making it suitable even for professional environments exposed to harsh climatic conditions. Weighing only 55g, it offers high performance in a lightweight and compact format.

Main Features

• UHF Band: 375-480MHz
• Type: 1/4
• Impedance: 50?
• Gain: 2.14dBi
• Max Power: 20W
• VSWR: <1.9
• Polarization: vertical, omnidirectional emission
• Rod: PP with 30% glass fiber, length 145mm
• Base: Hytrel, Ø33.5x27mm
• Connector: FME male
• Weight: 55g
• Operating Temperature: -40°C à· +80°C

The Atel Antennas active low profile antenna is designed for GPS GLONASS Galileo applications, operating on the frequencies 1575.42MHz and 1600MHz. Powered between 3 and 5V, it provides a gain of 23dB at 2.7V or 25dB at 5V, with a noise figure between 1.8 and 2.2dB. The impedance is 50?, with VSWR <2 and RHCP polarization, for precise and stable reception.

The compact and resistant structure (Ø73x22mm) is made with a polyamide 6 cap and a black zamak base, with a weight of 140g. It can be installed on sheets up to 4mm thick via a 15.4x15.4mm square hole or a Ø16mm round hole. The IP65 rating ensures resistance to dust and splashes. Ideal for vehicular or industrial applications, it operates from -30°C to +80°C.

Main features

• Bands: GPS GLONASS Galileo 1575.42&1600MHz
• Gain: 23dB (2.7V) / 25dB (5V)
• Noise figure: 1.8-2.2dB
• VSWR: <2.0
• Polarization: RHCP
• Impedance: 50?
• Power supply: 3-5V
• Materials: polyamide 6 cap, zamak base
• Dimensions: Ø73x22mm
• Weight: 140g
• Mounting: 15.4x15.4mm square hole or Ø16mm round hole (max thickness 4mm)
• Protection degree: IP65
• Operating temperature: -30°C à· +80°C

The Atel Antennas 3x3 MIMO dual-band antenna is designed to cover the 2.4-2.5GHz and 4.9-5.925GHz Wi-Fi bands, ideal for high-performance wireless networking solutions. With a standard 50? impedance and a VSWR of less than 2, it ensures high connection reliability.

Constructed with three elements in a MIMO configuration, it offers a maximum gain of 4.5±1dBi and an average gain of -2±0.5dBi. The antenna is omnidirectional, with vertical polarization, and can handle up to 3W of power. It is equipped with a 100mm long 1.13mm coaxial cable with a standard IPEX connector and a 3M6677 adhesive tape fastening system.

Compact and versatile, it has a length of 50mm and a radiator thickness of 0.15mm, with a weight of only 1.8g. Designed for indoor or protected outdoor use, it operates in a range of -40°C to +85°C.

Main Features

• Bands: 2.4-2.5GHz and 4.9-5.925GHz
• Configuration: 3x3 MIMO
• Impedance: 50?
• VSWR: <2.0
• Maximum Gain: 4.5±1dBi
• Average Gain: -2±0.5dBi
• Radiation: Omnidirectional
• Polarization: Vertical
• Maximum Power: 3W
• Cable: 1.13mm coaxial, 100mm
• Connector: IPEX 20278 112R 13
• Dimensions: 50mm x 0.15mm
• Weight: 1.8g
• Mounting: 3M6677 adhesive
• Operating temperature: -40°C à· +85°C

Designed for the TETRA/UHF 380-430MHz band, the Atel Antennas mobile antenna with a 1/4 configuration ensures reliable transmissions in mobile professional environments. With 50? impedance and 2.14dBi gain, it supports up to 20W of power with a VSWR of less than 2.0.

Radiation is omnidirectional with vertical polarization, ideal for uniform coverage. The body is made of polyamide 6 with a Pibiflex 4612 rod and gasket, offering mechanical resistance and lightness. The base measures 64x46mm and the weight is 80±20g. Installation takes place on sheet metal up to 4mm through a 15x15mm square hole or a Ø19mm round hole.

The antenna is optimized for professional vehicular environments and guarantees functionality even in critical environmental conditions, with operating temperatures between -30°C and +80°C.

Main features

• Band: TETRA/UHF 380-430MHz
• Type: 1/4 vehicular
• Impedance: 50?
• Gain: 2.14dBi
• Max power: 20W
• VSWR: <2.0
• Polarization: vertical, omnidirectional
• Materials: Pibiflex 4612, polyamide 6
• Base: 64 x 46mm
• Weight: 80±20g
• Mounting: 15x15mm or Ø19mm hole, sheet metal ‰¤4mm
• Operating temperature: -30°C à· +80°C

p>The Atel Antennas active magnetic antenna is designed for use with GPS GLONASS Galileo systems, covering the frequencies 1575.42MHz and 1600MHz. Powered at 3 5V, it guarantees good performance with a gain of 23dB at 2.7V or 25dB at 5V, maintaining a noise figure between 1.8 and 2.2dB, ideal for precise positioning applications.

Constructed of black ABS and equipped with a magnetic base, it is robust and compact (33.2x31.5x13.5mm), weighing only 50g. The 5m RG 174 cable with male SMA connector facilitates installation on vehicles or metal surfaces. RHCP polarization and VSWR less than 2.0 ensure stability and reliability even in harsh environments, with operating temperatures from -30°C to +80°C.

Main Features

• Type: Magnetic active patch antenna
• Bands: GPS GLONASS Galileo 1575.42 & 1600MHz
• Impedance: 50?
• Gain: 23dB (2.7V) / 25dB (5V)
• Noise figure: 1.8-2.2dB
• Polarization: RHCP
• VSWR: <2.0
• Power supply: 3-5V, consumption 10mA (2.7V) or 20mA (5V)
• Cable: RG 174, length 5000mm
• Connector: SMA male
• Material: ABS, black color
• Dimensions: 33.2x31.5x13.5mm
• Weight: 50g
• Operating temperature: -30°C à· +80°C

The Atel Antennas vehicle shark antenna combines LTE connectivity (790-960MHz / 1710-2700MHz), dual-band Wi Fi (2.4-2.485GHz and 5.25-5.85GHz), and GPS GNSS/Galileo satellite positioning (1580MHz ±28MHz) in a single device. Thanks to its compact and aerodynamic configuration, it is ideal for vehicles requiring integrated solutions and reliable performance.

The LTE and Wi Fi sections offer 2.14dBi gain with VSWR <3.3 and <3.0 respectively. The active GPS module provides 18dB gain at 2.7V or 22dB at 5V, with a noise figure between 1.7 and 2.1dB and VSWR <2.0. The antenna is made of polyamide 6 with Arnitel EM400 gasket, measures 95 x 52 x 65mm and weighs 150g. It is designed for mounting on sheet metal (max 4mm) via a 15x15mm square hole or Ø19mm round hole.

Each section is equipped with a male SMA connector: RG 316 (LTE), RG 174 (Wi Fi and GPS), length 180mm. The antenna is designed to operate in harsh environmental conditions, with a temperature range of -40°C to +85°C.

Main Features

• LTE Bands: 790-960 / 1710-2700MHz
• Wi-Fi Bands: 2.4-2.485GHz / 5.25-5.85GHz
• GPS Band: 1580±28MHz
• Gain: 2.14dBi (RF), 18-22dB (GPS active)
• GPS Noise Figure: 1.7-2.1dB
• VSWR: <3.3 (LTE), <3.0 (Wi-Fi), <2.0 (GPS)
• Polarization: Vertical (RF), RHCP (GPS)
• Impedance: 50?
• Max power: 20W (RF)
• Connectors: 3x SMA male
• Cables: RG 316 (LTE), RG 174 (Wi Fi/GPS), 180mm
• Materials: polyamide 6, Arnitel EM400
• Mounting: 15x15mm or Ø19mm hole, max 4mm sheet metal
• Dimensions: 95 x 52 x 65mm
• Weight: 150g ±20g
• Operating temperature: -40°C à· +85°C

The Atel Antennas 1/4 mobile antenna operates in the VHF band 130-230MHz, with 50? impedance and peak power up to 50W. It offers 2.14dBi gain, omnidirectional emission and vertical polarization, ensuring wide coverage and stable performance with VSWR <1.5 at ±6% F‚€ :contentReference[oaicite:4]{index=4}.

The 500mm rod is made of Pibiflex 2564 (extendable to 74°), with a polyamide 6 cap and Pibiflex 50 gasket. The compact base (64x46mm) is equipped with holes for mounting on a square (15x15mm) or round (Ø19mm) bracket. Lightweight (110g) and durable, it operates in a range from -30°C to +80°C. Connector and cable length available upon request, ideal for vehicle installations. :contentReference[oaicite:5]{index=5}

Main Features

• Type: 1/4 VHF mobile antenna
• Band: 130-230MHz
• Impedance: 50?
• Maximum power: 50W (peak)
• Gain: 2.14dBi
• Polarization: vertical, omnidirectional emission
• VSWR: <1.5 at ±6% F‚€
• Rod: Pibiflex 2564, length 500mm, elevation 74°
• Cap: polyamide 6; gasket: Pibiflex 50
• Structure: 64x46mm base
• Mounting: 15x15mm square hole or Ø19mm round hole
• Weight: 110g
• Operating temperature: -30°C à· +80°C
• Connector and cable on request

Designed for multi-band LTE applications, the Atel Antennas directional antenna covers three frequency ranges: 680-790MHz, 790-960MHz and 1710-2700MHz. With 10dBi gain, 50? impedance and 50W maximum power, it guarantees high performance in outdoor mobile communications. The VSWR is less than 2.0 in the lower band and <1.5 in the other two, ensuring optimal transmission efficiency.

The polarization is vertical with directional emission. The gray ABS body withstands harsh environmental conditions, with operating temperatures from -30°C to +80°C and wind resistance up to 120km/h. The dimensions are 162x142x45mm and the low weight facilitates installation.

It is equipped with a 5m cable (type CO100mm) and a male SMA connector. It can be mounted on poles with a diameter of Ø20 to Ø55mm, or on walls, making it suitable for multiple LTE usage scenarios.

Main features

• LTE bands: 680-790 / 790-960 / 1710-2700MHz
• Impedance: 50?
• Gain: 10dBi
• Max power: 50W
• VSWR: <2.0 (680-790MHz), <1.5 (other bands)
• Polarization: vertical
• Emission: directive
• Connector: SMA male
• Cable: 5m (CO100mm)
• Material: grey ABS
• Dimensions: 162 x 142 x 45mm
• Wind resistance: 120km/h
• Operating temperature: -30°C à· +80°C
• Mounting: on a Ø20-55mm pole or on a wall

The Atel Antennas mobile antenna integrates three systems in a single device: a VHF 130-230MHz antenna in 1/4 configuration and a UHF 380-500MHz antenna in 5/8, plus an active GPS GNSS/Galileo module with RHCP polarization on 1580MHz. With 50? impedance, it supports power up to 50W on the radio bands and has a gain of 2.14dBi for VHF/UHF, with VSWR <2.2.

The GPS GNSS module is powered at 2.7-5V with a gain of 18dB (2.7V) or 22dB (5V), a noise figure of 1.7-2.1dB and a VSWR <2.0. The antenna features a 500mm Pibiflex rod, polyamide cap and Arnitel EM400 gasket. It comes with RG 316 cable (150mm) with male FME connector and RG 174 extension (5m) with female/male SMA connectors.

The base measures 95 x 52mm, with mounting on a 15x15mm square hole or Ø19mm round hole, weighs 180g and resists from -30°C to +80°C. Compact and versatile, it is ideal for vehicle installations requiring integrated radio communications and GPS tracking.

Main Features

• Bands: VHF 130-230MHz (1/4), UHF 380-500MHz (5/8), GPS GNSS/Galileo 1580±28MHz
• Impedance: 50?
• Power: 50W (peak VHF/UHF)
• Gain: V/UHF 2.14dBi; Amplified GPS 18dB @2.7V / 22dB @5V
• GPS noise figure: 1.7-2.1dB
• Polarization: vertical (V/UHF), RHCP (GPS)
• VSWR: <2.2 for V/UHF, <2.0 for GPS
• Rod: Pibiflex 2564, length 500mm
• Materials: polyamide cap, Arnitel EM400 gasket
• Cables and connectors: RG 316 150mm FME M, RG 174 5m SMA F/M extension cable
• Base: 95 x 52mm, 15x15mm or Ø19mm holes
• Weight: 180g
• Operating temperature: -30°C à· +80°C

The T-AT960.10 mobile antenna from Atel Antennas combines three technologies in a single compact device: VHF (130-230MHz) and UHF (380-500MHz) in mobile configuration (1/4 for VHF, 5/8 for UHF), as well as an active module for GPS GNSS/Galileo with RHCP polarization, centered on 1580MHz. With a standard impedance of 50? and a maximum power of 50W, it offers a gain of 2.14dBi for the V/UHF bands and an amplified gain of 18dB (at 2.7V) or 22dB (at 5V), with noise of only 1.7-2.1 dB.

Made of robust materials (polyamide cap, ArnitelEM400 gasket, Pibiflex shaft), it has a 150mm RG-316 cable with male FME connector, plus a 5m RG-174 extension cable with male/female SMA connector. Operational from -30°C to +80°C, it mounts in 15x15mm square holes or Ø19mm round holes. Compact and lightweight (180g), it is perfect for vehicles requiring integrated radio communication and GPS positioning.

Main Features

• VHF 130-230MHz (1/4) and UHF 380-500MHz (5/8) bands
• Impedance: 50?
• Maximum power: 50W (peak V/UHF)
• V/UHF gain: 2.14dBi
• GPS GNSS/Galileo active module: center frequency 1580MHz, amplifier gain 18dB (2.7V) or 22dB (5V), noise figure 1.7-2.1dB
• GPS polarization: RHCP, V/UHF vertical, omnidirectional emission
• Cables and connectors: RG 316 150mm FMEm + RG 174 5m SMAF/SMAM extension cable
• Materials: polyamide cap, ArnitelEM400 gasket, Pibiflex rod
• Operating temperature: -30°C à· +80°C
• Mounting dimensions: 15x15mm square hole or Ø19mm round hole
• Weight: 180g
• VSWR: < 2.2 (V/UHF), < 2.0 (GPS)

The Atel-Antennas T-AT968.03 antenna is designed for vehicular and mobile applications requiring simultaneous connectivity on multiple bands. It supports GSM, UMTS, TETRA, and GPS/GNSS/Galileo systems, ensuring stable signal and high performance. The stainless steel construction with polyamide cap and Arnitel gasket ensures robustness and resistance over a temperature range of -30°C to +80°C.

The TETRA section (380-410 MHz) uses a 5/8 ? antenna with 5 dBi gain, while the GSM/UMTS sections offer omnidirectional emission with 2.14 dBi gain. The GPS/GNSS/Galileo module integrates an active antenna with up to 22 dB gain and low noise (1.7-2.1 dB), ideal for precise location. The antenna is equipped with SMA and FME connectors and RG174 and RG58 cables, which allow a versatile connection to routers, modems or professional radio systems.

Main features

• Support GSM 824-960 MHz, DCS/PCN 1710-1880 MHz, UMTS 1900-2170 MHz
• Active GPS/GNSS/Galileo module at 1580 MHz with gain up to 22 dB
• TETRA band 380-410 MHz with gain of 5 dBi
• Omnidirectional emission and vertical polarization
• Stainless steel structure with polyamide 6 cap
• SMA connectors m. and FME m., RG174 and RG58 cables (6 m)
• Operating temperature -30 °C to +80 °C
• Maximum power 10 W, impedance 50 Ohm