AikomGo September Promo: free shipping

The 5G directional panel antenna with 5 m cable is a mini directional panel solution designed to cover a wide frequency range from 698 to 960 MHz and from 1710 to 3800 MHz. Within the Sirio Antenne range, this model offers linear vertical polarization and does not require calibration, making it suitable for various wireless and cellular applications.

The version associated with the indicated code integrates a 5 m Low-Loss cable with a male SMA connector. Supports GSM-R, GSM-900, GSM-1800, 2G-GSM/GPRS/EDGE, 3G-UMTS, 4G-LTE, 5G, ISM/Sigfox/LoRa 868 MHz, ISM/Sigfox/LoRa 915 MHz and Wi-Fi 2.4 GHz systems, with pole or wall mounting.

• Mini panel with directional radiation
• Vertical linear polarization
• Frequency band from 698 to 960 MHz and from 1710 to 3800 MHz
• No calibration required
• Gain from 4 to 6 dBi at 698-960 MHz, from 9 to 10 dBi at 1710-2170 MHz, from 11 to 12 dBi at 1710-2170 MHz. dBi at 2300-2700 MHz and 11 to 12 dBi at 3300-3800 MHz
• Maximum power 35 W at 698-960 MHz, 35 W at 1710-2170 MHz, 25 W at 2300-2700 MHz and 20 W at 3300-3800 MHz
• 5 m Low-Loss cable
• SMA male connector
• Materials: galvanized steel, UV-stabilized thermoplastic and PCB
• Dimensions approx. 154 x 134 x 46 mm
• Weight approx. 400 g
• Mast or wall mounting

The Sirio Antenne WLAN MiMo mini panel antenna is designed for Wi-Fi applications on the 2.4-2.5 GHz and 5.15-5.89 GHz bands. Thanks to directional radiation and cross-polarization, it represents a suitable solution for installations where compactness, easy mounting, and support for dual-band Wi-Fi systems are required.

The model uses 2 male SMA connectors with 2 30 cm low-loss cables and can be installed on a pole or wall. The galvanized steel and UV-stabilized thermoplastic construction contributes to a solid construction, while the 7 dBi gain at 2.4-2.5 GHz and 11.4 dBi at 5.15-5.89 GHz supports its use in the bands specified by the manufacturer.

• Mini panel type
• Directional radiation
• Cross polarization
• Frequency band 2.4-2.5 GHz and 5.15-5.89 GHz
• 2.4 GHz Wi-Fi and 5 GHz Wi-Fi systems
• 7 dBi gain at 2.4-2.5 GHz
• 11.4 dBi gain at 5.15-5.89 GHz
• Maximum power of 20 W at 2.4-2.5 GHz and 8 W at 5.15-5.89 GHz
• 2 x SMA male connectors
• 2 x 30 cm low-loss cables
• Materials: galvanized steel and UV-stabilized thermoplastic
• Dimensions: 153 x 134 x 36 mm
• Weight: 420 g
• Mast or wall mounting

The 868-870 MHz 8 dBi SPO 868-8 omnidirectional antenna from Sirio Antenne is a collinear model designed for ISM, SIGFOX and LoRa 868 MHz applications. Omnidirectional radiation and vertical linear polarization support uniform coverage, while the 868-870 MHz band is declared with SWR less than or equal to 1.3 and without calibration required.

From a construction point of view, the product uses aluminum, anodized aluminum, nickel-plated brass, stainless steel, fiberglass and PCB. It integrates an N-female connector, supports a maximum power of 20 W, is pole-mounted and includes the FT-5 bracket, offering a ready-to-install solution.

• Collinear type.
• Omnidirectional radiation.
• Vertical linear polarization.
• Frequency band 868-870 MHz with SWR less than or equal to 1.3.
• No calibration required.
• Compatible with ISM, SIGFOX and LoRa 868 MHz systems.
• Gain of 8.0 dBi.
• Maximum power of 20 W.
• N-female connector.
• Materials: aluminum, anodized aluminum, nickel-plated brass, stainless steel, fiberglass and PCB.
• Height of 1600 mm.
• Weight 1020 gr.
• Pole mounting.
• FT-5 bracket included.

The 17 dBi 1.5-6 GHz Wide Band Directional Antenna is designed for multiple radio and cellular system applications, with Wide Band PCB structure, directional radiation and vertical linear polarization. In the Sirio Antenne proposal, this model operates in the 1.5-6 GHz band with a SWR less than or equal to 1.8 and does not require calibration.

It supports GSM-1800, 4G-LTE, 5G systems in the 3.4-3.8 GHz band, 2.4 GHz Wi-Fi, 5 GHz Wi-Fi, WiMAX, DECT and V2X, with gain up to 14.9 dBd and 17 dBi at 6 GHz. The construction uses aluminum, stainless steel, UV stabilized thermoplastic and PCB, while mounting is planned on a pole or wall.

• Wide Band PCB type
• Directional radiation
• Vertical linear polarization
• Frequency band 1.5-6 GHz with a SWR less than or equal to 1.8
• No calibration required
• Compatible with GSM-1800, 4G-LTE, 5G 3.4-3.8 GHz, Wi-Fi 2.4 GHz, Wi-Fi 5 GHz, WiMAX, DECT and V2X systems
• Gain up to 14.9 dBd and 17 dBi at 6 GHz
• Maximum power 15 W from 1.5 to 4 GHz and 10 W from 4 to 6 GHz
• Ground fault protection with metal parts shorted to ground and capacitively coupled center conductor
• SMA female connector
• Materials: aluminum, stainless steel, UV-stabilized thermoplastic and PCB
• Dimensions 345 x 135 x 73 mm
• Weight 450 g
• Mast or wall mounting

The 1700-2500 MHz log-periodic antenna from Sirio Antenne is designed for cellular and wireless applications requiring directional radiation and linear vertical polarization. It supports the 1700-2500 MHz frequency band without the need for calibration and is suitable for GSM-1800, 3G-UMTS, 2.4 GHz Wi-Fi, and DECT systems, offering a practical and reliable solution for professional installations.

The structure uses materials such as aluminum, brass, stainless steel, and UV-stabilized thermoplastic. With dimensions of 345 x 135 x 73 mm, weight of 400 g, SMA-female connector and short-circuited to ground earth protection, this Sirio Antenne antenna combines ease of installation and mechanical robustness, with the possibility of mounting on a pole or wall.

• Log periodic type with directional radiation
• Vertical linear polarization
• Frequency band 1700-2500 MHz without calibration required
• Compatible with GSM-1800, 3G-UMTS, Wi-Fi 2.4 GHz and DECT systems
• Gain of 9 dBd and 11.1 dBi
• Maximum power of 50 W
• SMA-female connector
• Short-circuited to ground earth protection
• Materials: aluminum, brass, stainless steel, and UV-stabilized thermoplastic
• Pole or wall mounting

The 6 dBi N-f Wi-Fi omnidirectional antenna is a solution for 2.4 GHz Wi-Fi systems that combines omnidirectional radiation, linear vertical polarization, and a 3 x 1/2 lambda collinear structure. In this proposal from Sirio Antenne, the frequency band is 2.4-2.485 GHz @ SWR less than or equal to 1.5 and does not require calibration, offering simple installation and well-defined technical characteristics.

The product is equipped with an N-female connector, pole mounting, and ground protection shorted to ground. The aluminum, chrome-plated brass, stainless steel, fiberglass and PCB construction, along with the updated mounting bracket for poles with a maximum diameter of 60 mm, contribute to a configuration suitable for professional environments.

• Trade Name: SCO-2.4-6 N-f
• Type: 3 x 1/2 lambda collinear
• Radiation Omnidirectional
• Vertical linear polarization
• Frequency Band: 2.4-2.485 GHz @ SWR less than or equal to 1.5
• Supported System: 2.4 GHz Wi-Fi
• Gain: 6 dBi
• Maximum Power: 20 W CW
• Ground Protection: Shorted to ground
• Connector: N-female
• Mounting: On pole
• Materials: aluminum, chrome-plated brass, stainless steel, fiberglass, PCB
• Approximate height: 385 mm
• Approximate weight: 350 g
• Mounting bracket for poles with a maximum diameter of 60 mm

The 6 dBi N-m Wi-Fi omnidirectional antenna is designed for 2.4 GHz Wi-Fi systems and combines omnidirectional radiation, linear vertical polarization, and a 3 x 1/2 lambda collinear structure. Sirio Antenne's proposal for this version operates in the 2.4-2.485 GHz band @ SWR less than or equal to 1.5 and does not require calibration, simplifying system configuration.

The model with an N-male connector is designed for connector mounting and is made of aluminum, chrome-plated brass, stainless steel, fiberglass, and PCB. It is equipped with a short-circuited ground protection, with a maximum declared power of 20 W CW, an approximate height of 390 mm and an approximate weight of 300 g.

• Trade Name: SCO 2.4-6
• Version: N-m
• Type: 3 x 1/2 lambda collinear
• Radiation: omnidirectional
• Polarization: linear vertical
• Frequency Band: 2.4-2.485 GHz @ SWR less than or equal to 1.5
• No calibration required
• Systems: 2.4 GHz Wi-Fi
• Gain: 6 dBi
• Maximum Power: 20 W CW
• Ground Protection: Short-circuited to mass
• Connector: N-male
• Mounting type: connector
• Materials: aluminum, chrome-plated brass, stainless steel, fiberglass, PCB
• Approximate height: 390 mm
• Approximate weight: 300 g

The Sirio Antenne dual-band N-f Wi-Fi omnidirectional antenna is designed for applications on 2.4 GHz Wi-Fi and 5 GHz Wi-Fi networks, operating in the 2.40-2.485 GHz and 5.15-5.875 GHz bands. Its collinear structure with omnidirectional radiation and vertical linear polarization makes it suitable for contexts where uniform coverage is required.

Associated with the code 2132120.00, this version corresponds to the SCO-2451 N-f model and is equipped with an N-female connector and pole mounting. Sirio Antenne uses materials such as aluminum, chrome-plated brass, fiberglass and PCB, with an approximate height of 255 mm and a weight of approximately 330 g; The pole mounting bracket supports a maximum diameter of 60 mm.

• Collinear type
• Omnidirectional radiation
• Vertical linear polarization
• Frequency band 2.40-2.485 GHz and 5.15-5.875 GHz
• Compatible with 2.4 GHz Wi-Fi and 5 GHz Wi-Fi systems
• Gain of 4 dBi for 2.4-2.485 GHz and 6 dBi for 5.15-5.875 GHz
• Maximum power of 10 W
• N-female connector
• Pole mounting
• Materials: aluminum, chrome-plated brass, fiberglass and PCB
• Approximate height of 255 mm
• Weight Approximate weight of 330 g
• Mounting bracket for poles with a maximum diameter of 60 mm

The Sirio Antenne dual-band N-m omnidirectional Wi-Fi antenna is designed for dual-band WLAN applications, operating in the 2.40-2.485 GHz and 5.15-5.875 GHz frequencies. Its collinear structure with omnidirectional radiation and vertical linear polarization makes it suitable for 2.4 GHz Wi-Fi and 5 GHz Wi-Fi systems.

The SCO-2451 N-m version, associated with the code 2132120.00/NM, integrates an N-male connector and is designed for connector mounting. Sirio Antenne also indicates construction materials in aluminum, chromed brass, fiberglass and PCB, with an approximate height of 255 mm, an approximate weight of 330 g and a mounting bracket on a mast with a maximum diameter increased to 60 mm.

• Collinear type
• Omnidirectional radiation
• Vertical linear polarization
• Frequency band 2.40-2.485 GHz and 5.15-5.875 GHz
• Compatible with 2.4 GHz Wi-Fi and 5 GHz Wi-Fi systems
• Gain of 4 dBi for 2.4-2.485 GHz and 6 dBi for 5.15-5.875 GHz
• Maximum power of 10 W
• N-male connector
• Mounting on Connector
• Materials: Aluminum, chrome-plated brass, fiberglass, and PCB
• Approximate height of 255 mm
• Approximate weight of 330 g
• Mast mounting bracket with maximum diameter increased to 60 mm

The HGO 4G LTE omnidirectional antenna with 50 cm cable is designed for complete coverage of the 4G LTE band and uses a multi-band dipole array with vertical linear polarization. In the Sirio Antenne catalog, this version is indicated with a 50 cm low-loss cable, SMA male connector, and pole or wall installation, for applications requiring wide coverage and flexible mounting.

It operates in the 790-960 MHz and 1710-2700 MHz bands without the need for calibration and supports GSM-R, GSM-900, GSM-1800, 2G-GSM/GPRS/EDGE, 3G-UMTS, 4G-LTE, ISM/SIGFOX/LoRa 868 MHz, ISM/SIGFOX/LoRa 915 MHz, Wi-Fi 2.4 GHz, and DECT systems. Construction materials include galvanized steel, UV-stabilized thermoplastic, and PCB, with dimensions of 335 x 166 x 144 mm and a weight of approximately 350 g.

Key Features

• Full 4G LTE band coverage
• Multi-band dipole array
• Omnidirectional radiation
• Vertical linear polarization
• 790-960 MHz and 1710-2700 MHz frequency bands
• No calibration required
• Support for cellular and wireless networks, including 2G, 3G, 4G-LTE, LoRa, 2.4 GHz Wi-Fi, and DECT
• Gain up to 6 dBi depending on the band
• Maximum power up to 20 W depending on the band
• 50 cm Low-Loss cable
• SMA male connector
• Mast or wall mounting

The HGO 4G LTE omnidirectional antenna with 5 m cable from Sirio Antenne is designed for complete coverage of the 4G LTE band, with a multi-band dipole array structure, omnidirectional radiation, and linear vertical polarization. It operates in the 790-960 MHz and 1710-2700 MHz bands without the need for calibration, making it compatible with various communication and data transmission systems indicated by the manufacturer.

This version comes with a 5 m low-loss cable and an SMA-male connector, with other connector types available upon request. The galvanized steel, UV-stabilized thermoplastic and PCB construction, together with the possibility of pole or wall mounting, makes it suitable for different installation contexts.

• Full coverage of the 4G LTE band
• Multi-band dipole array
• Omnidirectional radiation
• Vertical linear polarization
• Frequency band: 790-960 MHz and 1710-2700 MHz
• No calibration required
• Supported systems: GSM-R, GSM-900, GSM-1800, 2G-GSM/GPRS/EDGE, 3G-UMTS, 4G-LTE, ISM/SIGFOX/LoRa 868 MHz, ISM/SIGFOX/LoRa 915 MHz, Wi-Fi 2.4 GHz, DECT
• Gain: 5 dBi for GSM 900 and 1800 bands and LTE 800, 6 dBi for UMTS band, 5-6 dBi for WLAN and LTE bands
• Maximum power: 20 W for GSM 900 and LTE 800, 10 W for GSM 1800 and UMTS, 6 W for WLAN and LTE
• 5 m Low-Loss cable
• SMA-male connector
• Materials: Galvanized steel, UV-stabilized thermoplastic, PCB
• Approximate dimensions: 335 x 166 x 144 mm
• Approximate weight: 350 g
• Mast or wall mounting