AikomGo April Promo: free shipping
Valid until 30 April 2026
The discount is automatically applied at checkout, without the need for promotional codes.
The promotion is applicable on all catalog products on AikomGo.
900 VA galvanic separator transformer
The TSR 900 is a 900 VA galvanic isolation transformer designed for professional applications requiring maximum protection against atmospheric discharges, lightning, and mains disturbances. Galvanic isolation eliminates ground faults and ensures a safe and stable power supply.
Thanks to its DIN rail mounting compatibility, it is easy to integrate into electrical cabinets and control panels. With 3.5 kV dielectric isolation and rugged construction, it represents a reliable solution for critical installations.Main Features
- Rated Power: 900 VA (765 VA 100% duty)
- Input/Output: 230 Vac ±10%
- Load Stability: ±3%
- Dielectric Isolation: 3.5 kV for 30 s
- DIN Rail Mounting
- Dimensions: 75 x 164 x 165 mm
- Weight: 6 kg
5-port DIN rail switch 10/100 Mbps TSW010
This TSW010 unmanaged industrial switch offers a cost-effective and reliable way to connect up to five Ethernet devices at speeds up to 100 Mbps, with no configuration required”it's plug-and-play. Its rugged design, featuring an anodized aluminum housing and guaranteed ventilation, makes it suitable for extreme conditions, with an operating temperature range of "40°C to +75°C and an IP30 rating. Power is flexible, supporting 9"30 V DC input via a 2-pin industrial connector, and can also be passively powered via the ETH1 port (mode B), also 9"30 VDC (not compatible with IEEE 802.3af/at/bt standards).Main Features
- 5 10/100 Mbps RJ45 Ethernet ports with auto MDI/MDIX, IEEE 802.3i/u/x/az compliant
- Non-blocking bandwidth up to 1 Gbps, MAC table for 2K addresses, 2048-byte jumbo frame support
- Ultra-low power consumption: approximately 0.3 W idle, up to 0.9 W max
- 9"30 VDC power supply via a 2-pin connector or via the ETH1 port in Passive PoE mode B
- Anodized aluminum housing, weight approximately 146.5 g; small size 113.1 - 27.4 - 80.5 mm
- Integrated bracket for DIN rail mounting; also supports wall or table mounting (additional kit)
- Operating temperature "40 °C to +75 °C, humidity 5% to 95% non-condensing; IP30 protection rating
- Certifications: CE, UKCA, FCC, IC, CB, RCM, REACH, RoHS, WEEE and others
8-port DIN rail switch 10/100Mbps TSW030
This TSW030 unmanaged switch lets you connect up to eight Ethernet devices at speeds up to 100Mbps without any configuration: just power it up and it's ready to use. The anodized aluminum enclosure offers ruggedness and resistance to harsh environments, while the integrated DIN rail mounting ensures quick and solid installation.
Extremely low power consumption ranges from approximately 0.5W at idle to 1.5W maximum, optimizing efficiency and operating costs. Protection features include overvoltage, reverse polarity, and surge protection.
Key Features- 8 10/100Mbps RJ45 Ethernet ports with auto MDI/MDIX, compliant with IEEE802.3i/u/ab/x/az
- Non-blocking performance up to 20Gbps, 128KB packet buffer, 2K address MAC table, jumbo frame support up to 9216bytes
- Ultra-low power consumption: approximately 0.5W idle, up to 1.5W peak
- 2-pin industrial DC power input, voltage range 7 to 57VDC, with overvoltage, reverse polarity, and surge protection
- Anodized aluminum enclosure, weight approximately 256g; Compact size 113.1x41.2x74.6mm
- Integrated bracket for DIN rail mounting; also supports wall or table mounting (additional kit required)
- Operating temperature "40°C to +75°C, humidity up to 95% non-condensing; IP30 rating
- Status LEDs: 1 power LED, 16 Ethernet port status LEDs; ground screw included
- Certifications CE, UKCA, EAC, RCM, FCC, IC, CB and safety standards IEC62368-1 (2018 ed.)
8-port PoE+ 10/100 Mbps DIN rail switch TSW040
The TSW040 is a Teltonika unmanaged switch with 8 10/100 Mbps RJ45 ports, designed to provide both connectivity and PoE+ (802.3af/at) power up to 30 W per port, with a total budget of 240 W. The anodized aluminum body makes it rugged and suitable for industrial installations, while the integrated DIN rail mount facilitates quick and secure mounting.
Power is supplied via a 2-pin industrial DC connector, with input voltage from 7 to 57 VDC. It operates as a standard switch below 44 VDC, while PoE functionality is only available with power supply from 44 VDC and above. Power consumption is approximately 1 W at idle and up to 2 W plus PoE delivery during operation.
Key Features- 8 10/100 Mbps RJ45 ports with auto MDI/MDIX, IEEE 802.3i/u/ab/x/az compliant
- Active PoE+ on all ports (Mode B), up to 30 W per port, total power budget 240 W
- 20 Gbps non-blocking bandwidth, 128 KB buffer, MAC table for 2K addresses, jumbo frames up to 9216 bytes
- 2-pin 7"57 VDC industrial DC power supply, overvoltage, reverse polarity, and surge protection
- Power consumption: approximately 1 W at idle, up to 2 W during operation (excluding PoE power)
- Anodized aluminum housing, dimensions 113.1 - 41.2 - 74.6 mm, weight approximately 280 g
- Integrated DIN rail mounting; optional wall or surface mount
- Status LEDs: 1 power LED, 16 Ethernet port LEDs; ground screw included
- Operating temperature "40 °C to +75 °C, humidity 5%"95% non-condensing; IP30 rating
- Certifications: CE, FCC, IC, UKCA, EAC, RCM, IEC 62368-1 standard
5-port Gigabit PoE+ DIN rail switch TSW100
The TSW100 is a Teltonika unmanaged switch featuring 5 Gigabit Ethernet ports (10/100/1000Mbps) and 4 PoE+ ports compliant with IEEE802.3af/802.3at standards, capable of providing up to 30W per port with a total power budget of 120W. The all-aluminum enclosure ensures ruggedness in industrial environments, and integrated or surface-mounted DIN rail mounting ensures maximum flexibility.
Power is supplied via a 4-pin industrial DC connector with a voltage range of 7 to 57VDC; PoE functionality is available from 44VDC and above. Power consumption is approximately 2W in idle mode, up to 9W without PoE load, and up to 129W when all PoE ports are delivering power.
Key Features- 5 RJ45 Gigabit Ethernet ports with auto MDI/MDIX, IEEE802.3i/u/ab/x/az compliant
- Active PoE+ on 4 ports (Mode A or B depending on model), up to 30W per port, total power budget 120W
- Non-blocking bandwidth up to 10Gbps, 128KB packet buffer, MAC table for 2K addresses, jumbo frame support up to 9216 bytes
- 4-pin industrial DC power connector, 7"57VDC; PoE-out 44"57VDC; Overvoltage, reverse polarity, and surge protection
- Power consumption: 2W idle, up to 9W without PoE delivery, and 129W with PoE load
- Aluminum enclosure, dimensions 115 - 32.2 - 101.2mm, weight approximately 350g
- Integrated DIN rail mounting; optional wall or surface mount (kit required)
- LED indicators: 1 power LED, 10 Ethernet port status LEDs; ground screw included
- Operating temperature "40°C to +75°C, humidity 5% to 95% non-condensing; IP30 rating
- Certifications CE, UKCA, EAC, FCC, IC, NOM, Anatel, CB, IEC62368-1 standards and EMC regulations
5-port Gigabit PoE+ DIN rail switch TSW101
The TSW101 is a Teltonika unmanaged switch equipped with 5 RJ45 Gigabit Ethernet ports (10/100/1000Mbps), 4 of which support PoE+ power according to the IEEE802.3af/at (Alternative A) standard, up to 30W per port with a total budget of 60W. Powered from 9 to 30VDC via a 2-pin industrial connector, it is ideal for installations in vehicles and industrial environments.
The aluminum structure with IP30 protection rating guarantees durability and resistance. Energy consumption is extremely low: 0.64W at idle, up to 2.31W without PoE and up to 62.3W at full PoE load. The switch is plug-and-play, with integrated DIN-rail mounting and optional support for wall or surface installation.
Key Features- 5 RJ45 Gigabit Ethernet ports with auto MDI/MDIX, IEEE 802.3i/u/ab/x/az compliant
- 4 PoE+ ports up to 30W each, total power budget 60W
- 10Gbps non-blocking bandwidth, 128KB buffer, MAC table up to 2K addresses, jumbo frames up to 9216bytes
- 9 to 30VDC power supply via 2-pin industrial connector, compatible with 12V and 24V batteries
- Consumption: 0.64W idle, up to 2.31W without PoE, up to 62.3W at full load PoE
- IP30 aluminum enclosure, dimensions 115 - 32 - 95mm, weight 354"384g
- Integrated DIN rail or optional wall/surface mounting
- LEDs: 1 power LED, 10 Ethernet port status LEDs; ground screw included
- Operating temperature "40°C to +75°C, humidity 5"95% non-condensing
- Certifications: CE, UKCA, FCC, IC, CB, RCM, E-Mark, compliant with IEC 62368-1 and EMC standards
Layer 2 DIN rail switch 5 Gigabit ports TSW110
The TSW110 is an unmanaged Layer 2 switch with five RJ45 Gigabit Ethernet ports (10/100/1000Mbps), compatible with IEEE 802.3i/u/ab/x/az standards. Designed for industrial environments, it combines compactness, robustness, and very low power consumption, less than 0.4W at idle and up to 1.8W at full load.
With support for 9 to 30VDC power supply via a 4-pin industrial connector or via passive PoE on the ETH1 port (Mode B, not compliant with IEEE 802.3af/at/bt), the switch offers versatility and ease of installation. DIN rail, wall, or surface mounting is possible using dedicated accessories.
Main Features- 5 RJ45 Gigabit Ethernet Layer 2 ports with auto MDI/MDIX, IEEE 802.3i/u/ab/x/az
- 10Gbps non-blocking bandwidth, jumbo frames up to 9216 bytes, 2K-entry MAC table
- 9"30VDC power supply via 4-pin industrial connector, reverse polarity and overvoltage protection
- Passive PoE support on the ETH1 port (Mode B, 9"30VDC)
- Consumption <0.4W idle, <1.8W maximum load
- Aluminum housing, dimensions 100 - 30 - 85mm, weight 227g
- Integrated DIN rail or optional wall/surface mounting
- Power LED and status LED for each port
- Operating temperature "40°C to +75°C, humidity 5"95% non-condensing, IP30
- Certifications: CE, UKCA, EAC, FCC, IC, NOM, RCM, BSMI, CB, IEC 62368-1
Layer2 DIN rail switch 5 Gigabit ports TSW114
The TSW114 is a Teltonika unmanaged Layer 2 switch with five RJ45 Gigabit Ethernet ports (10/100/1000Mbps), featuring auto MDI/MDIX and full compatibility with IEEE802.3i/u/ab/x/az standards. Designed for extreme industrial environments, it features a compact and lightweight anodized aluminum design with an integrated DIN rail bracket for quick, front-facing installation.
Power supply supports 9 to 30VDC via a 2-pin industrial connector or through the ETH1 port in passive PoE mode (ModeB, not compliant with IEEE802.3af/at/bt). It consumes only about 0.3W at idle and up to 2.3W during heavy use, offering maximum energy efficiency.
Key Features- 5 RJ45 Gigabit Ethernet Layer 2 ports with auto MDI/MDIX, compliant with IEEE802.3i/u/ab/x/az
- 10Gbps non-blocking bandwidth, 128KB buffer, 2K address MAC table, jumbo frames up to 9216 bytes
- Integrated DIN rail mounting; optional wall or surface mount with dedicated kit
- Anodized aluminum enclosure, dimensions 113.1 - 27.4 - 80.5mm, weight approx. 174g :contentReference[oaicite:8]{index=8}
- 9"30VDC power supply via industrial 2-pin connector with reverse polarity and surge protection; passive PoE support on ETH1 port (ModeB)
- Ultra-low power consumption: approx. 0.3W idle, approx. 2.3W maximum
- Power LED and status LED for each Ethernet port; ground screw included
- Operating temperature "40°C to +75°C, humidity 5"95% non-condensing; IP30 protection degree
- Certifications: CE, UKCA, FCC, IC, CB, RCM, CITC, REACH, RoHS, WEEE; EMC compliance and IEC62368-1
Layer 2 DIN rail switch 8 Gigabit PoE+ ports TSW20
The TSW200 is an unmanaged Layer 2 switch with 8 RJ45 Gigabit Ethernet ports (10/100/1000Mbps) equipped with PoE+ functionality and 2 SFP ports for fiber optic connections. The PoE+ ports support IEEE 802.3af/at standards with capacity for supplying up to 30W each, for a maximum total of 240W.
Designed for industrial environments, it is housed in a rugged aluminum enclosure with integrated DIN rail mounting and options for wall or surface mounting via kit. Power is supplied via a 2-pin industrial DC connector with voltage ranging from 7 to 57VDC; PoE functionality is available from 44VDC and above. Power consumption is approximately 1.8W at idle, 5.5W in use without PoE load, and up to 245.5W with all PoE ports active.
Key Features- 8 Gigabit Ethernet ports with PoE+ up to 30W per port, total budget 240W
- 2 SFP ports for fiber optic connections
- 20Gbps non-blocking bandwidth, up to 9216 bytes of jumbo frame, 128KB buffer
- 2K address MAC table, auto MDI/MDIX support
- 7"57VDC power supply with reverse polarity and overvoltage protection; 44VDC Active PoE
- Power consumption: 1.8W idle, 5.5W without PoE, 245.5W with full PoE
- Aluminum enclosure, dimensions 132 - 44.2 - 95.1mm, weight 517g
- Integrated DIN rail or wall/surface mounting with accessories
- Power LED, Ethernet and SFP ports; ground screw included
- Operating temperature "40°C to +75°C, humidity up to 95% non-condensing, IP30 rating
- Certifications: CE, UKCA, FCC, IC, CB, CITC, ANRT, EMC compliant and IEC 62368-1
8 Gigabit 2 SFP TSW202 managed multi-layer switch
The TSW202 is a multi-layer managed switch designed for advanced industrial networks. It features 8 RJ45 Gigabit Ethernet ports with PoE+ (IEEE 802.3af/at) support for up to 30W per port, for a total power budget of 240W, and 2 SFP ports for fiber optic data transmission. The combination of electrical and optical ports allows for flexibility in network architectures and long-distance connections.
Featuring the TSWOS operating system, based on OpenWrt, it offers a user-friendly web interface, support for firmware updates (FOTA), and full integration with the Teltonika RMS platform. Advanced features include IPv4/IPv6 static routing, VLAN, QoS, advanced authentication, integrated diagnostics, and per-port PoE management. It supports protocols such as Profinet (Class B), EtherNet/IP, and MRP, essential for industrial automation and control.
Main Features- 8 Gigabit Ethernet PoE+ ports (30W per port, total budget 240W)
- 2 SFP ports for fiber optic connections
- IEEE 802.3i/u/ab/x/az support, auto MDI/MDIX
- Multi-layer functionality with IPv4/IPv6 static routing
- Industrial protocols: Profinet Class B, EtherNet/IP, MRP
- Management via TSWOS, web interface, RMS, FOTA
- Security: VLAN, 802.1x, PAM, Radius, TACACS+
- QoS: DSCP, port priority, rate limiting, shaping
- Built-in diagnostics: ping, traceroute, nslookup, cable test
- 128MB RAM, 16MB flash
- Power supply 7"57VDC, active PoE 44"57VDC
- Power consumption: <3W idle, <8W operating, max 240W with PoE
- Aluminum housing, 132 - 44.2 - 122.2mm, 610g
- Integrated DIN rail or wall/surface mounting with accessories
- Temperature range "40°C/+75°C, humidity 5"95%, IP30
- Certifications: CE, UKCA, FCC, IC, CB, RCM, EAC, UCRF, IEC 62368-1
8 Gigabit 2 SFP TSW210 unmanaged switch
The TSW210 is an unmanaged switch designed for industrial environments, with 8 RJ45 Gigabit Ethernet ports and 2 SFP ports for fiber transmission. It requires no configuration and is ready to use out of the box, offering a simple and robust solution for extending your network.
Powered by a 7 to 57 VDC power supply via a 2-pin industrial connector, it consumes approximately 1.03W at idle and up to 3.71W at maximum power. The anodized aluminum housing and integrated DIN rail mounting make it ideal for professional applications. It also supports wall or surface installation with an optional kit.
Main Features- 8 RJ45 Gigabit Ethernet auto MDI/MDIX ports compatible with IEEE 802.3i/u/ab/x/az
- 2 SFP ports for fiber optic connections
- 20Gbps bandwidth, 128KB buffer, 2K MAC table, jumbo frames up to 9216bytes
- 7"57VDC power supply via 2-pin industrial connector
- Consumption: approximately 1.03W in idle, up to 3.71W in use
- Aluminum housing, dimensions 132x44.2x95.1mm, weight 500g
- Integrated DIN rail or wall/surface mounting with accessories
- Status LED for power, Ethernet and SFP ports; earth screw included
- Operating temperature from "40°C to +75°C, humidity 10"90% non-condensing, IP30 rating
- Certifications: CE, UKCA, FCC, IC, CB, RCM, CITC, ANRT; EMC and IEC 62368-1
TSW210 Industrial Ethernet Switch
The Teltonika Networks TSW210 Industrial Ethernet Switch is a solution designed to ensure reliable connectivity in professional and industrial settings. The device integrates eight Ethernet ports numbered 1 to 8 with dedicated LEDs, two SFP ports with status LEDs, and a front-panel PWR button, offering a clear and functional layout.
Power is supplied via a 2-pin industrial DC connector with an input voltage range of 7–57 VDC. Power consumption is low, with approximately 1.03 W at idle and up to 3.71 W at maximum load. The product complies with multiple safety and EMC standards, including UL 62368-1, CAN/CSA C22.2 No. 62368-1-19, and EN 55032. Key Features
- 8 Ethernet ports numbered 1–8 with dedicated LEDs
- 2 SFP ports with status LEDs
- 2-pin industrial DC power connector
- Input voltage range: 7–57 VDC
- Power consumption: approximately 1.03 W idle, maximum 3.71 W
- Safety standards: UL 62368-1, CAN/CSA C22.2 No. 62368-1-19
- EMC standards: EN 55032:2015 + A1:2020, EN 55035:2017 + A11:2020