AikomGo September Promo: free shipping

The 0.8 m USB 2.0 Type A to Micro USB cable is designed to connect devices with USB 2.0 A and USB 2.0 Micro B connectors via a male-to-male configuration. Within the Teltonika range, this solution combines a compact design with construction features designed for reliable use.

The cable features aluminum foil shielding, 30 AWG conductor, a 4 mm outer diameter, and a black finish. It also features a UL 94 V-0 flammability rating, RoHS and REACH compliance.

• USB 2.0 cable with USB 2.0 A and USB 2.0 Micro B connectors
• Male-to-male connector configuration
• Length of 800 mm
• Shielded with shield and aluminum foil
• 30 AWG conductor
• 4 mm cable outer diameter
• Color: Black
• Weight: 26 g
• UL 94 V-0 flammability rating
• RoHS and REACH compliance

The SMA Cable Extension antenna is an accessory designed to extend the range of Teltonika antennas equipped with SMA connections. Thanks to its female-male connector and 2m long cable, it offers greater freedom of positioning while maintaining signal quality even at high frequencies.

• Connectors: SMA female on one end, SMA male on the other
• Cable length: approximately 2000mm
• Frequency compatibility: up to 6000MHz
• Maximum VSWR: 1.35
• Impedance: 50Ω
• Attenuation: approximately 3.5dB @ 2700MHz
• Operating temperature: "55°C to +155°C
• Working voltage: 335V max; Withstand voltage: 1000Vrms
• Connector durability: ‰¥500 cycles
• Weight: approx. 50g
• Compliance: RoHS

Perfect for installations where it is necessary to physically separate the antenna from the device, maintaining high radio efficiency over broadband in industrial, vehicular or IoT contexts.

The EU 130 W 50 VDC power supply is a power solution designed to ensure continuity and reliability in professional settings. Teltonika Networks manufactures it with EU Type C input, 100 - 240 VAC input voltage and 50 / 60 Hz frequency, offering a 50 VDC output with a current of 2.6 A.

The device supports an extended input range of 90 to 264 VAC and a frequency of 47 to 63 Hz, with an input current of 2.5 A and a maximum inrush current of 50 A. The output voltage has a maximum deviation of 47.5 to 52.5 VDC, while short circuit protection contributes to greater operational safety.

With a weight of 600 g, a 4-pin 3 mm pitch output connector, HIPOT Primary to Secondary testing at 4242 VDC, MTBF of 50000 h and efficiency compliant with the DoE Level VI standard, this Teltonika Networks power supply is suitable for installations requiring consistent electrical performance and compliance regulations.

• Power of 130 W
• Input 100 - 240 VAC with extended range 90 - 264 VAC
• Input frequency 50 / 60 Hz with range 47 - 63 Hz
• Output 50 VDC
• Output current 2.6 A
• Input connector EU Type C
• Output connector 4-pin pitch 3 mm
• Short circuit protection
• Maximum input inrush current 50 A
• Maximum output voltage deviation 47.5 - 52.5 VDC
• HIPOT Primary to Secondary 4242 VDC
• MTBF of 50000 h
• Efficiency compliant with DoE Level VI
• Safety and EMC certifications according to the regulations indicated in the technical data sheet

The 18W 12VDC 2-pin EU power supply is a compact and reliable power solution for professional settings that require continuous operation and compatibility with European Type-C input. Teltonika Networks integrates a 12VDC output with a current of 1.5A into this device, supporting an input range of 100 to 240VAC and a frequency of 50/60Hz.

The product includes short circuit protection, HIPOT Primary to Secondary isolation test up to 4242VDC and an MTBF of 50,000 hours, features that contribute to greater reliability in use. The 2-pin output connector with cable terminals and a weight of 106 g facilitate integration into various installations.

• Output power of 18 W
• Output voltage of 12 VDC
• Output current of 1.5 A
• Input voltage of 100 to 240 VAC
• Input frequency of 50 / 60 Hz
• Maximum absolute input voltage of 90 to 264 VAC
• Maximum absolute input frequency of 47 to 63 Hz
• Inrush current of 60 A
• Maximum absolute output voltage of 11.4 to 12.6 VDC
• Short circuit protection
• HIPOT test Primary to Secondary: 4242 VDC
• MTBF of 50000 h
• EU Type C input connector
• 2-pin output connector with cable terminals
• Weight of 106 g
• Safety certifications IEC 62368-1:2014 and EN 62368-1:2014+A11:2017
• EMC certifications EN 55032:2015, EN 55035:2017, EN 61000-3-2:2019, EN 61000-3-3:2013+A1:2019

The 24W 24VDC universal power supply is a power solution designed for international compatibility and reliable performance. With 100-240VAC input, 50/60Hz frequency, and interchangeable EU, UK, US, and AU input connectors, Teltonika Networks offers a power supply suitable for a variety of installation scenarios.

The 24VDC output with 1.0A current and a 4-pin, 3mm pitch connector provides stable power, while short-circuit protection contributes to operational safety. The device supports a maximum input range of 90 - 264 VAC, maximum frequency of 47 - 63 Hz, inrush current of 60 A, HIPOT test at 3000 VAC and MTBF of 30000 h.

• Power of 24 W
• Input voltage 100 - 240 VAC
• Input frequency 50 / 60 Hz
• Input current 0.8 A
• Output voltage 24 VDC
• Output current 1.0 A
• 4-pin output connector with 3 mm pitch
• Interchangeable input connectors EU Type C UK Type G US Type A AU Type I
• Short circuit protection
• HIPOT 3000 VAC
• MTBF of 30000 h
• Weight of 141 g
• Safety Certifications IEC 62368-1:2014+A11:2017 UL 62368-1:2014 Ed.2 CSA C22.2 No. 62368-1:2014 Ed.2 AS/NZS 62368.1:2018
• Energy Efficiency Compliance EN 50563:2011+A1:2013 EN 50564:2011 10 CFR 430 Appendix Z: 2015
• EMC Compliance EN 55032:2015 Class B EN 61000-3-2:2014 EN 61000-3-3:2013 EN 55024:2010 FCC Part 15B AS/NZS CISPR32:2015

The 62W 48VDC EU 2-pin power supply is a power solution designed for applications requiring 48VDC output and European-style connectivity. With 100 - 240 VAC input, 50 / 60 Hz frequency and EU type C input connector, Teltonika Networks offers a power supply suitable for professional installations.

The device delivers 1.3 A output via a 2-pin connector with cable terminals and supports an input range of 90 - 264 VAC with a frequency of 47 - 63 Hz. Short circuit protection, primary-secondary HIPOT test at 4000 VDC and a MTBF of 50,000 h help ensure operational reliability over time.

• Power of 62 W
• Input voltage 100 - 240 VAC
• Input frequency 50 / 60 Hz
• Input current 1.5 A
• EU type C input connector C
• Output Voltage 48 VDC
• Output Current 1.3 A
• 2-pin Output Connector with Cable Terminals
• Input Voltage Range 90 - 264 VAC
• Input Frequency Range 47 - 63 Hz
• Maximum Input Inrush Current 50 A
• Maximum Output Voltage Deviation 45.6 - 50.4 VDC
• Short Circuit Protection
• HIPOT Primary-Secondary 4000 VDC
• MTBF of 50000 h
• Weight 305 g
• Safety Certifications EN 61558-1:2005/A1:2009 EN 61558-2-16:2009/A1:2013 CB Scheme
• EMC certifications EN 55032:2012+AC:2013 EN 61000-3-2:2014 EN 61000-3-3:2013 EN 55024:2010+A1:2015

The 130W 2-pin EU power supply is designed to provide reliable, continuous power to Teltonika devices such as TSW industrial switches. It supports a wide input voltage range (100"240VAC), with 50VDC output up to 2.6A via cord end terminal connectors.

• Rated input voltage: 100"240VAC (operating range 90"264VAC)
• Input current: 2.5A; Peak inrush up to 50A
• Input frequency: 50/60Hz (47"63Hz)
• Output voltage: 50VDC with ±5% deviation (47.5"52.5VDC)
• Maximum output current: 2.6A
• Output connector: Industrial 2-pin cord end terminal
• Protection: Active short circuit; 4242VDC primary-secondary HIPOT test
• Efficiency standard: DoE Level VI
• MTBF: Approximately 50,000h; Weight: approx. 500g
• Safety/EMC certifications: EN 60335, EN 62233, EN 55014, EN 61000-4 series
• Input connector: EU TypeC plug
• Operating temperature: wide tolerance from domestic to industrial environments
• Regulatory compliance: RoHS

Perfect for powering Teltonika devices such as TSW series switches, this power supply ensures reliable power delivery, built-in protection and certified high-efficiency performance in industrial environments.

The 250W 2-pin EU power supply is designed to provide reliable, continuous power to high-power Teltonika devices, such as TSW industrial switches. It supports a wide input voltage range of 100"240VAC with overvoltage and short-circuit protection. The output is stable at 54VDC with a maximum current of 4.62A, via cord end terminals.

• Input: 100"240VAC (operating range 90"264VAC), 50/60Hz
• Input current: 3.9A; peak inrush up to 60A
• Output: 54VDC (±5%), max current 4.62A
• Connectors: 2-pin industrial cord end terminal
• Built-in protection: short circuit and primary-secondary HIPOT test at 1500VAC
• Certifications: IEC62368-1 (CB Scheme), EMC compliance according to EN standards
• Weight: approximately 1080g
• Efficiency: compliant with DoE Level VI
• Certification compliance: RoHS, EMC

Ideal for Teltonika devices that require stable and powerful power, this power supply guarantees certifiable performance and built-in protection in industrial environments and mission-critical networks.

The 15W 24V DIN-Rail Power Supply is a compact solution for applications requiring stable 24VDC power in DIN-rail installations. Designed by Teltonika Networks, it supports 90 to 264VAC input at 50/60Hz and provides an output current of 0.63A, offering consistent performance across a variety of power supply environments.

The device includes short-circuit protection and screw connections on both input and output for convenient and safe wiring. Weighing 78g and rated for 3kVAC primary-secondary HIPOT, it is a suitable choice for environments where safety and EMC compliance are required.

• 15W DIN Rail Power Supply
• Output Voltage 24VDC
• Output Current 0.63A
• Input Voltage 90-264VAC
• Input Frequency 50/60Hz
• Input Current 0.5A
• Maximum Absolute Input Voltage 85-264VAC
• Maximum Absolute Input Frequency 47-63Hz
• Inrush Current 45A
• Maximum Absolute Output Voltage 21.6-29VDC
• Short Circuit Protection circuit
• Primary-secondary dielectric test 3 kVAC
• Screw input connector
• Screw output connector
• Weight 78 g
• Safety certifications EN 62368-1:2014+A11:2017 and BS EN 62368-1:2014+A11:2017
• EMC certifications EN 55032:2015+A11:2020+A1:2020, EN 55035:2017+A11:2020, EN IEC 61000-3-2:2019+A1:2021, EN 61000-3-3:2013+A1:2019+A2:2021, BS EN 55032:2015+A11:2020, BS EN 55035:2017+A11:2020, BS EN IEC 61000-3-2:2019+A1:2021, BS EN 61000-3-3:2013+A1:2019

The 1-Port 15W Gigabit PoE Injector is designed to provide power and data connectivity over an Ethernet network in a simple, convenient format. The Teltonika Networks solution supports active PoE power with 52 VDC output and 0.35 A current, making it suitable for applications requiring compliance with the IEEE 802.3af standard.

Equipped with an RJ45 port for data input and an RJ45 port for data output plus PoE, it allows transmission speeds of up to 10 / 100 / 1000 Mbps. The 100 - 240 VAC input power supply with 50 / 60 Hz frequency and EU Type E/F connector facilitates integration into various operating environments.

With an MTBF of 100,000 hours, RoHS compliance and EN 62368-1:2014+A11:2017 safety certification, this Teltonika Networks PoE injector offers a reliable solution for power distribution over Ethernet.

• 15W 1-Port Gigabit PoE Injector
• Input Voltage 100 - 240 VAC
• Input Frequency 50 / 60 Hz
• Input Current 0.5 A
• PoE Output at 52 VDC and 0.35 A
• Active PoE Method
• Support IEEE 802.3af Standard
• PoE Mode Mode A with pinout 1 / 2 positive and 3 / 6 negative
• 1 RJ45 port for data input
• 1 RJ45 port for data output plus PoE
• Data Rate 10 / 100 / 1000 Mbps
• EU Type E/F Power Connector
• MTBF of 100,000 hours
• Weight 365 g
• RoHS compliant
• Safety certification EN 62368-1:2014+A11:2017

The 1-Port 10/100 Mbps Passive PoE Injector is a compact solution for powering compatible devices over Ethernet, combining data transmission and power over a single RJ45 connection. Teltonika Networks offers a device with 100 - 240 VAC input, 24 VDC PoE output, and power output of up to 19.2 W, suitable for environments requiring simple power distribution over 10/100 Mbps links.

The product uses passive PoE technology with Mode B, 4 / 5 (+), 7 / 8 (-) pinouts, and features one RJ45 port for data input and one RJ45 port for data plus PoE output. Completing the technical profile are a MTBF of 40,000 h, a weight of 295 g, RoHS compliance, and safety and EMC certifications according to the declared standards.

• Power input 100 - 240 VAC with 50 / 60 Hz frequency.
• Passive PoE output at 24 VDC with 0.8 A current.
• PoE output power up to 19.2 W.
• 1 RJ45 port for Ethernet data input.
• 1 RJ45 port for data output plus PoE.
• Data rate 10 / 100 Mbps.
• PoE Mode B with pinout 4 / 5 (+), 7 / 8 (-).
• EU power connector with Schuko type F plug.
• MTBF of 40000 h.
• Weight of 295 g.
• RoHS compliance.
• Certifications: EN 62368-1:2014+A11:2017, EN 55032:2015/A11:2020, EN 55035:2017, EN IEC 61000-3-2:2019, EN 61000-3-3:2013+A1:2019.

The 24W EU Gigabit Passive PoE Injector is a solution designed to provide power and data connectivity over Ethernet in a single compact device. With this accessory, Teltonika Networks offers an injector with 100-240 VAC input voltage, 24 VDC PoE output, and a maximum power of 24 W, suitable for environments that require a stable connection and dedicated power supply via the Ethernet port.

The device supports 10/100/1000 Mbps data rates and uses passive PoE with Mode B, pinouts 4/5 (+) and 7/8 (-). It integrates 1 RJ45 port for Ethernet data input and 1 RJ45 port for data + PoE output. The EU type F power plug allows for easy integration into compatible environments, while the MTBF value of 30,000 h contributes to reliable use over time.

• Power Input: 100 - 240 VAC.
• Input Frequency: 50 / 60 Hz.
• Input Current: 0.8 A.
• PoE Output: 24 VDC, 1 A, 24 W.
• PoE Method: Passive.
• PoE Mode B with pinouts 4 / 5 (+) and 7 / 8 (-).
• 1 RJ45 port for Ethernet data input.
• 1 RJ45 port for data output + PoE.
• Data rate up to 10 / 100 / 1000 Mbps.
• MTBF: 30000 h.
• EU power connector with Schuko Type F plug.
• Weight: 295 g.
• RoHS compliant.
• Safety and EMC certifications: EN 62368-1:2014+A11:2017, EN 55032:2015/A11:2020, EN 55035:2017, EN IEC 61000-3-2:2019, EN 61000-3-3:2013+A1:2019.