AikomGo September Promo: free shipping
Valid until 30 September 2026
Consult over 2,000 available products and purchase the most suitable solutions for your next projects, without transport costs.
The discount is automatically applied at checkout, without the need for promotional codes.
The promo is valid only for shipment to Italy.
Single-Port 30W Gigabit PoE Injector
The Teltonika 30W Single-Port Gigabit PoE Injector is designed to provide convenient and reliable power and data connectivity over Ethernet. The Teltonika solution integrates an RJ45 data input port and an RJ45 data and PoE output port, supporting 10/100/1000 Mbps speeds and 56 VDC active PoE power.
With support for IEEE 802.3 af/at standards, this PoE injector adapts to various network power scenarios. It features EU Type E/F power input, 100 - 240 VAC input voltage, 50 / 60 Hz frequency and 0.7 A input current. Teltonika completes the product profile with a MTBF of 50,000 hours, weight of 300 g and compliance with the safety and EMC certifications indicated in the datasheet.
Main Features- 30 W Single Port Gigabit PoE Injector
- 1 RJ45 Data Input Port
- 1 RJ45 Data Output Port + PoE
- 10 / 100 / 1000 Mbps Data Rate
- Active PoE with 56 VDC and 0.54 A output
- IEEE 802.3 af / at standard support
- PoE mode B with pinouts 4 / 5 (+) and 7 / 8 (-)
- Power input 100 - 240 VAC at 50 / 60 Hz
- EU Type E/F power connector
- MTBF of 50 000 hours
- Weight 300 g
- Certifications Safety EN 62368-1:2014+A11:2017 and EMC EN 55032:2015/A11:2020 EN 55035:2017 EN IEC 61000-3-2:2019 EN 61000-3-3:2013+A1:2019
EU 24W 12V DC TypeC power supply
The 24W EU power supply is designed to provide stable and safe power to Teltonika devices such as routers and UPSs. It supports a wide input voltage range from 100 to 240VAC and converts to 12VDC output at a maximum of 2A via a 4-pin, 3mm pitch industrial connector.
Main Features- Input voltage: 100"240VAC (operating range 90"264VAC, 50/60Hz)
- Input current: approximately 0.8A, inrush up to 60A
- Output voltage: 12VDC (±5%), max. current 2A
- Output connector: 4-pin, 3mm pitch
- Input connector: interchangeable EU TypeC plug
- Protection: integrated short circuit and dielectric test (HIPOT) at 4000VDC between primary and secondary
- Efficiency: compliant with DoE standards LevelVI
- MTBF: approximately 30,000 hours; weight: approximately 115g
- Certifications: IEC62368-1, EMC compliance according to EN 55032 Class B and EN 55024; energy efficiency EN 50563 and 50564
Perfect for powering Teltonika devices in IoT or industrial settings, this power supply guarantees reliable 12VDC delivery, high protection and compliance with the most stringent energy standards.
20W 12V DIN Rail Power Supply
The 20W 12V DIN Rail Power Supply is a compact solution for professional installations requiring stable power on a 35mm DIN rail. Teltonika Networks offers it with a 12V DC output, 20W power, and an output current of 0 to 1.67A, with an input voltage of 85 to 264VAC and a frequency of 47 to 63Hz.
The device offers 80% efficiency, 120mVp-p ripple and noise, 1% line regulation, and 1% load regulation. It also includes 105% to 160% overload protection with automatic recovery, as well as 120% to 140% overvoltage protection.
Key Features
- 20W Output Power
- 12V DC Output Voltage
- 0 to 1.67A Output Current
- 85 - 264VAC Input @ 47 - 63Hz
- 35mm DIN Rail Mount
- 80% Efficiency
- 120mVp-p Ripple and Noise
- 105% - 160% Overload Protection with Automatic Recovery
- 120% Overvoltage Protection - 140%
- Working temperature -10 °C to +50 °C
- Dimensions 22.5 x 90 x 100 mm
- Weight 190 g
EU 2-pin 9W power supply
The 9W 2-pin EU power supply is designed to provide stable power with 100 - 240 VAC input and 9 VDC output, with 1.0 A output current. Thanks to the EU Type-C input connector and the 2-pin output connector with rope terminals, it represents a practical solution for compatible applications that require continuity and reliability.
With this solution, Teltonika Networks offers a power supply that complies with the DoE Level VI efficiency standard, features short-circuit protection and has undergone HIPOT Primary to Secondary testing up to 4000 VDC. The device supports an input voltage range of 90 - 264 VAC and a frequency of 47 - 63 Hz, with a maximum output voltage deviation of 8.55 to 9.45 VDC.
Main Features- Power 9 W
- Input voltage 100 - 240 VAC
- Input voltage range 90 - 264 VAC
- Input frequency 50 / 60 Hz
- Input frequency range 47 - 63 Hz
- Input current 0.45 A
- Input connector EU type C
- Output voltage 9 VDC
- Output current 1.0 A
- Output connector 2 pins with terminals cord
- Maximum output voltage deviation 8.55 - 9.45 VDC
- Short circuit protection
- Maximum input inrush current 60 A
- HIPOT test Primary to Secondary: 4000 VDC
- MTBF of 30000 h
- Efficiency standard DoE Level VI
- Safety certifications IEC 62368-1:2014 and EN 62368-1:2014+A11:2017
- EMC certifications EN 55032:2015 and EN 55035:2017
- Weight 81 g
EU 2-pin 9W 9VDC power supply
The 9W 2-pin EU power supply is designed for Teltonika devices with 2-pin cord end input, such as RUT and DAP series routers. It accepts input voltage from 100 to 240VAC (range 90"264VAC), 50/60Hz, with input current of 0.45A and peak inrush current of up to 60A. The output provides 9VDC at 1A (range 8.55"9.45VDC), with short-circuit protection and dielectric test (HIPOT) of 4000VDC between primary and secondary.
Main Features- Input: 100"240VAC (90"264VAC), 50/60Hz;
- Input current: 0.45A; inrush max 60A;
- Output: 9VDC ±5%, 1A;
- Output connector: 2-pin cord end;
- Short protection and HIPOT test 4000VDC;
- MTBF approximately 30000h;
- Efficiency: DoE Level VI;
- Certifications: IEC62368-1, EN55032, EN55035;
- Weight: approximately 81g;
- Operating temperature: "10°C to +40°C, storage "20°C to +70°C;
- Compliance: RoHS.
Perfect for powering Teltonika routers with 2-pin DC input in domestic or industrial environments, it offers stable power delivery, integrated protection and certified reliability.
9W universal power supply
The 9W universal power supply offers stable power with 100-240 VAC input and 9 VDC 1.0 A output, making it suitable for environments requiring international electrical compatibility and operational reliability. The Teltonika Networks solution integrates interchangeable EU, US, UK, and AU input connectors and a 4-pin 3 mm pitch output connector for convenient power management.
This power supply supports an extended input range of 90-264 VAC and a frequency of 47-63 Hz, with an input current of 0.45 A. It also includes output overcurrent protection up to 2 A, 0.1 W standby power, 200 mV ripple and noise, and 4000 VDC HIPOT primary to secondary testing. The MTBF value of 30,000 h and compliance with the DoE Level VI efficiency standard complete a technical profile oriented towards continuous operation.
Main Features- 9 W power supply.
- Rated input 100 - 240 VAC with operating range 90 - 264 VAC.
- Rated input frequency 50 / 60 Hz with range 47 - 63 Hz.
- 9 VDC output with output current 1.0 A.
- 4-pin output connector with 3 mm pitch.
- Interchangeable input connectors included: EU Type C, US Type A, UK Type G and AU Type I.
- Maximum input inrush current of 60 A.
- Maximum output voltage deviation of 8.55 to 9.45 VDC.
- Leakage current of 0.25 mA.
- Ripple and noise of 200 mV.
- Output overcurrent protection up to 2 A.
- Standby power of 0.1 W.
- HIPOT Primary to Secondary: 4000 VDC.
- MTBF of 30,000 h.
- DoE Level VI efficiency standard.
- EMC, EMI and Safety certifications indicated in the datasheet.
EU Power Supply 48 VDC 62.4 W
The 48 VDC 62.4 W EU power supply is a power solution designed for professional environments that require reliability and continuous operation. Teltonika Networks integrates in this model a 100 - 240 VAC input with a frequency of 50 / 60 Hz and a 48 VDC output with current up to 1.3 A, for stable power supply that complies with the indicated technical requirements.
The device uses an EU Type C input connector and a 4-pin output connector with a 3 mm pitch. Short-circuit protection contributes to operational safety, while the MTBF value of 50,000 hours supports use in environments where reliability is a factor. The product also comes with safety and EMC certifications according to the declared standards.
Main Features- Output power of 62.4 W
- Input voltage 100 - 240 VAC
- Input voltage range 90 - 264 VAC
- Input frequency 50 / 60 Hz
- Input frequency range 47 - 63 Hz
- Input current 1.5 A
- Output voltage 48 VDC
- Output current 1.3 A
- Maximum output voltage deviation 45.6 - 50.4 VDC
- Input connector EU Type C
- Output connector 4 pins with 3 mm pitch
- Surge protection Short Circuit
- Maximum Input Inrush Current 50 A
- HIPOT Test Primary to Secondary: 4000 VDC
- MTBF of 50000 h
- Weight 330 g
- Safety Certifications IEC/EN 61558-1:2005+A1:2009 and IEC/EN 61558-2-16:2009+A1:2013
- EMC Certifications EN 55032:2012+AC:2013, EN 61000-3-2:2014, EN 61000-3-3:2013, EN 55024:2010+A1:2015
EU 2-pin 18W 12V DC power supply
The 18W 2-pin EU power supply is designed for Teltonika devices such as the RUT360, RUT361, RUTC50, or RUTM08 routers that require moderate power. It supports an input range of 90"264VAC at 50/60Hz with an input current of approximately 0.6A (60A peak inrush). The output is regulated to 12VDC with a current of up to 1.5A and a maximum deviation of ±5%.
Main Features- Input voltage: 100"240VAC (range 90"264VAC), 50/60Hz
- Input current: 0.6A; inrush peak up to 60A
- Output voltage: 12VDC (11.4"12.6VDC)
- Output current: 1.5A
- Output connector: 4-pin, 3mm pitch
- Built-in protection: short circuit and HIPOT test at 4000VDC between primary and secondary
- Energy efficiency: DoE Level VI
- MTBF: approximately 30,000h; Weight: approx. 89.8g
- Certifications: IEC62368-1, EMC according to EN 55032 / EN 55035 / EN 61000-3-2/3
- Input connector: EU TypeC plug
Perfect for powering Teltonika devices in industrial or domestic environments, this power supply guarantees stable performance, electrical protection and compliance with the highest standards.
M12 8 pin X type straight male connector
The M12 8-pin X-type straight male connector is a solution designed for reliable connections in industrial settings and demanding environments. Teltonika Networks offers an M12 screw-mount connector, designed to guarantee IP67 protection when inserted and to operate over a wide temperature range from -40°C to +85°C.
The structure uses selected materials for the body, contacts and shielding, with a GD-Zn housing, CuZnPb contacts with Ni + Au finish and CuSn shielding with Sn finish. The product supports voltages up to 48 V AC and 60 V DC, a current of 0.5 A and an insertion and extraction force less than or equal to 30 N, with a lifespan of at least 100 mating cycles.
Main features
- 8-pin M12 X-type straight male connector
- Rated voltage up to 48 V AC / 60 V DC
- Rated current of 0.5 A
- M12 screwable mounting
- IP67 protection when inserted
- Temperature range from -40 °C to +85 °C
- Conductor cross-section for solid wire from AWG 26/1 to AWG 22/1
- Conductor cross-section for stranded wire from AWG 26/7 to AWG 22/7
- Insertion and extraction force less than or equal to 30 N
- Endurance of at least 100 mating cycles
- Housing in GD-Zn with Ni finish
- Contacts in CuZnPb with Ni + Au finish
- Shielding in CuSn with Sn finish
- Stuffer cap in PA
- Weight of 47 g
- RoHS and REACH compliant
SFP SR 1.25 Gb/s LC transceiver
The SFP SR 1.25 Gb/s LC transceiver is a module designed for multi-mode fiber connections with data rates up to 1.25 Gb/s. The Teltonika Networks solution uses a Duplex LC connector, transmits at a wavelength of 850 nm, and supports links up to 550 m over 50/125 µm MMF fiber.
This transceiver is designed for harsh operating environments with a temperature range of -40°C to +85°C, with operating humidity of 5 to 85%. The all-metal enclosure helps reduce EMI, while less than 1W of maximum power consumption supports efficient integration into compatible devices.
Key Features
- 1.25 Gb/s SFP SR transceiver
- LC Duplex connector
- Multi-mode fiber support
- Up to 550 m of range on 50/125 µm MMF fiber
- 850 nm TX wavelength
- Less than 1W of maximum power consumption
- Operating temperature range -40°C to +85°C
- Operating humidity range 5 to 85%
- All-metal enclosure for low EMI
- RoHS and REACH compliant
2x8 pin connector 300 V 8 A
The 2x8-pin 300V 8A connector is a solution designed for reliable electrical connections in applications requiring compactness and durability. In the Teltonika portfolio, this component stands out for its 2-level structure with 8 positions per level, a pitch of 3.5 mm and compatibility with conductors from 0.2 to 1.5 mm2.
It supports a nominal voltage of 300 V, a nominal current of 8 A and a withstand voltage of 1600 V. The connector accepts wires from 24 to 16 AWG, with a recommended stripping length of 9 - 10 mm, and is made with PA66 insulation and internal copper alloy contacts with a tin-plated finish.
Main features
- 2x8-pin screwless connector
- Rated voltage: 300 V
- Rated current: 8 A
- Withstand voltage: 1600 V
- Cable range: 24 - 16 AWG
- Length stripping distance: 9 - 10 mm
- Pitch: 3.5 mm
- Conductor cross-section: 0.2 - 1.5 mm2
- 8 positions per level
- 2 levels
- Operating temperature: -40 °C to +105 °C
- Insulation material: PA66
- Internal contact material: copper alloy
- Internal contact finish: tinned
- RoHS compliant
- REACH compliant