AikomGo September Promo: free shipping
Valid until 30 September 2026
Consult over 2,000 available products and purchase the most suitable solutions for your next projects, without transport costs.
The discount is automatically applied at checkout, without the need for promotional codes.
The promo is valid only for shipment to Italy.
2x8 pin connector, 3.5 mm pitch
The 2x8-pin 3.5 mm pitch connector is a solution designed for stable and reliable electrical connections. Teltonika Networks offers it with PA66 insulation material, tinned copper alloy contacts, and compatibility with cables with cross-sections ranging from 0.2 to 1.5 mm², for practical use in multiple installations.
The product supports a nominal voltage of 300 V and a nominal current of 8 A, with a dielectric withstand voltage of 1600 V for 1 minute. The operating temperature range of -40 °C to +105 °C expands its versatility of use, while the recommended stripping length of 9 - 10 mm facilitates cabling preparation.
Main features
- 2x8 pin connector with 3.5 mm pitch
- PA66 insulating material
- Copper alloy contacts with finish tinned
- Supported cable section from 0.2 to 1.5 mm2, equal to 16 - 24 AWG
- Nominal voltage of 300 V
- Nominal current of 8 A
- Dielectric withstand voltage of 1600 V for 1 minute
- Operating temperature from -40 °C to +105 °C
- Strip length of 9 - 10 mm
- RoHS, REACH and UL 94 V-0 compliant
RJ45 1.25 Gb/s SFP transceiver
The 1.25 Gb/s RJ45 SFP transceiver is a compact solution for copper connectivity via an RJ-45 interface, designed for environments requiring operational reliability and compatibility with links up to 100 m. With Teltonika Networks, this module combines a data rate of 1.25 Gb/s with an all-metal case design, useful for reducing EMI and supporting installations in industrial or professional settings.
The device consumes up to 2.0 W and operates over a temperature range of -40 °C to +70 °C, with operating humidity of 5 to 95%. RoHS and REACH compliance completes a technical profile suitable for integrations where service continuity and attention to environmental compatibility are required.
Main features- SFP transceiver with RJ-45 connector
- Data rate up to 1.25 Gb/s
- Cable distance up to 100 m
- Maximum consumption of 2.0 W
- All-metal case for low EMI
- Operating temperature from -40 °C to +70 °C
- Operating humidity from 5 to 95 %
- RoHS and REACH compliance
1.25 Gb/s BiDi SFP transceiver 20 km
The 1.25 Gb/s 20 km BiDi SFP transceiver is designed for single-mode fiber links with a Simplex LC connector and a data rate of 1.25 Gb/s. The solution, offered by Teltonika Networks, supports a range of up to 20 km on G.652 SMF fiber, maintaining a maximum power consumption of less than 0.8 W.
Available in two complementary variants, it integrates inverted TX and RX wavelengths, 1310 nm and 1550 nm or 1550 nm and 1310 nm respectively. The all-metal housing helps reduce EMI and provide excellent ESD protection, while operation over a temperature range of -40°C to +85°C and operating humidity of 5 to 85% makes it suitable for demanding environments.
Key Features- BiDi SFP transceiver with 1.25 Gb/s data rate
- Simplex LC connector
- Support for single mode fiber
- Cable distance up to 20 km on G.652 SMF
- Maximum power consumption less than 0.8 W
- Variant 1 with TX 1310 nm and RX 1550 nm
- Variant 2 with TX 1550 nm and RX 1310 nm
- All-metal housing for low EMI and protection ESD
- Operating humidity from 5 to 85%
- Operating temperature from -40 °C to +85 °C
- RoHS and REACH compliance
4-pin connector adapter with screw terminals
The 4-pin connector adapter with screw terminals provides a robust and professional connection for Teltonika devices requiring DC power through an industrial 4-pin input. It is designed for applications where a safe and reliable screw connection is required, ensuring high standards in terms of voltage, current and insulation.
Main Features- Rated voltage: 250V AC/DC
- Rated current: 5A AC/DC
- Withstand voltage: 1500V AC for 1 minute
- Insulation resistance: ‰¥1000MΩ
- Contact resistance: approx. 10mΩ
- Insulator material: Nylon66
- Internal contact material: tin-plated phosphor bronze/brass
- Operating temperature: "25°C to +85°C
- Compact weight
Compatible with Teltonika products such as BAT120, RUT200, RUT240 and other devices with 4-pin input, This connector ensures reliability, safety, and ease of wiring in industrial or mobile environments.
2 x 3 pin 3.5 mm connector
The 2 x 3-pin 3.5 mm connector is a solution designed for applications requiring stable and compact electrical connections. Made from PA66 insulation material and tin-plated copper alloy contacts, it offers technical features suitable for various integration contexts. With this component, Teltonika Networks offers a connector with a rated voltage of 300 V, a rated current of 8 A, and a dielectric strength of 1600 V for 1 minute.
The product supports a cable cross-section of 0.2 to 1.5 mm2, with a recommended stripping length of 9 to 10 mm. Operation is expected within a temperature range of -40°C to +105°C and is RoHS, REACH and UL 94 V-0 compliant.
Key Features- 2 x 3-pin connector with 3.5 mm pitch
- PA66 insulation material
- Copper alloy contacts with tin-plated finish
- Wire cross-section supported from 0.2 to 1.5 mm², equivalent to 16 - 24 AWG
- 300 V rated voltage
- 8 A rated current
- 1600 V dielectric strength for 1 minute
- 9 to 10 mm stripping length
- Operating temperature range -40°C to +105°C
- RoHS, REACH certifications and UL 94 V-0
35mm DIN Rail Mounting Kit
The Teltonika 35mm DIN Rail Mounting Kit allows you to safely and professionally install devices such as RUT-series routers or TSW switches on standard 35mm rails in cabinets or technical panels. The bracket is made of low-carbon steel, ensuring strength and stability.
Main Features- Compatibility: 35mm DIN Rail
- Material: Low-carbon Steel
- Dimensions: Approx. 82-46-20mm
- Weight: Approx. 57g
- Screws Included: 2 Philips Pan Head #6-32-3/16
- Installation: Screw mounting without additional accessories
- Compliance: RoHS
Perfect for enhancing the installation of Teltonika devices in industrial environments, this kit ensures a tidy, secure and DIN rail compliant mounting.
Compact kit for 35mm DIN rail mounting
The compact 35mm DIN rail mounting kit is designed for discreet installation of Teltonika devices in cabinets or technical panels. Made of ABS+PC plastic, it ensures stable mounting in a small size, without adding bulk to the internal structure.
Main Features- Compatibility: standard 35mm DIN rail
- Material: UV-resistant ABS+PC plastic
- Dimensions: approx. 70-25-14.5mm
- Weight: approx. 6.5g
- Screws included: 2 Philips Pan Head #6-32-3/16
- Easy mounting without additional accessories
- Compliance: RoHS
Ideal for Teltonika slim-profile devices such as the TRB145, TRB245, RUTX08, this kit offers a tidy, professional and space-saving mounting solution for industrial or IoT environments.
Flat surface mounting kit
The Teltonika Surface Mounting Kit allows you to install devices such as routers or switches directly on flat surfaces without the need for DIN rails or racks. Thanks to its ABS+PC plastic construction and small footprint, the kit is ideal for discreet installations in domestic, industrial or vehicular environments.
Key Features- Mounting Type: Flat Surface
- Material: Durable ABS+PC Plastic
- Dimensions: Approx. 25 - 48 - 7.5mm
- Weight: Approx. 10g (two pieces of ~5g each)
- Screws Included: 2 Philips Pan Head #6-32-3/16
- Easy and clean installation without additional accessories
- Compliance: RoHS
Perfect for Teltonika devices such as RUT routers and TSW switches, this kit offers a neat, discreet and professional mounting solution on flat surfaces.
2x5 and 2x3 pin connector set
2x5 and 2x3 pin connector set includes two connectors designed for applications with a nominal voltage of 300 V and a nominal current of 8 A. The Teltonika solution integrates a 2 x 5 pin and a 2 x 3 pin configuration, offering compatibility with conductors from 0.2 to 1.5 mm2 and cables from 16 to 24 AWG.
Both connectors adopt PA66 insulating material, internal contacts made of copper alloy with Sn plated finish, a pitch of 3.5 mm and a stripping length of 9 to 10 mm. The set operates in a temperature range from -40 °C to +105 °C, has a withstand voltage of 1600 V for 1 minute, flammability class UL 94 V-0 and RoHS and REACH compliance.
Main Features- Set consisting of 2 x 5-pin connector and 2 x 3-pin connector.
- Rated voltage of 300 V.
- Rated current of 8 A.
- Withstand voltage of 1600 V for 1 minute.
- Compatibility with cables from 16 to 24 AWG.
- Conductor cross-section from 0.2 to 1.5 mm².
- Pitch of 3.5 mm.
- Stripping length from 9 to 10 mm.
- Operating temperature from -40 °C to +105 °C.
- Insulating material PA66.
- Internal contacts in copper alloy with Sn-plated finish.
- Stainless steel shrapnel for the 2 x 5-pin connector.
- Copper alloy shrapnel for the 2 x 3-pin connector.
- Flammability class UL 94 V-0.
- RoHS and REACH compliant.
Nano/Micro SIM adapter kit
The Nano/Micro SIM Adapter Kit is designed to facilitate the convenient and tidy management of SIM formats. The kit includes an eco-friendly Kraft cardboard holder, PVC adapters, and a stainless steel SIM needle, offering a simple and compact solution.
Weighing 1g, Teltonika Networks' offering integrates precise specifications for use with Nano SIM and Micro SIM. The needle thickness is 0.60 mm, while the adapters have a thickness of 0.67 mm and internal dimensions defined for the two supported formats.
Main Features- Adapter kit for Nano SIM and Micro SIM.
- Eco-friendly Kraft cardboard holder.
- Stainless steel SIM needle.
- SIM needle thickness of 0.60 mm.
- Nano/Micro SIM adapters in PVC.
- Adapter thickness of 0.67 mm.
- Nano SIM adapter internal dimensions: 12.60 x 9.10 mm.
- Micro SIM adapter internal dimensions: 15.10 x 12.10 mm.
- Weight of 1 g.
4-pin power adapter with I/O access
The 4-pin power adapter with I/O access allows you to connect a charger with a DC barrel connector (5.5 x 2.1 mm) to Teltonika devices with an industrial 4-pin DC input. It features open I/O connections on additional pins, allowing interfacing with digital inputs or alarms. It is a convenient and flexible solution for scenarios where you want to use a standard power supply with Teltonika devices while maintaining access to I/O signals.
Main Features- Input: 5.5x2.1mm DC barrel socket
- Output: 4-pin DC connector, 3mm pitch
- Access: Optional I/O pins exposed on cable line
- Integrated cable: approximately 150mm
- Compatibility: Teltonika devices with a 4-pin DC socket
- Compliance: RoHS
This adapter is ideal for powering Teltonika devices in custom systems or with standard power supplies, while providing direct access to I/O signals such as digital inputs or alarms.
Flat surface mounting kit
The Teltonika Surface Clip Holder Kit is designed for flush-mounting compact devices directly onto flat surfaces such as panels or cabinets, without the use of screws or DIN rails. The clips are easy to install and provide a secure, stable hold.
Key Features- Material: Durable ABS+PC plastic
- Mounting Type: Screwless flat surface
- Compatibility: Compact Teltonika devices (e.g., small routers)
- Quick clip-to-hold installation
- Weight: Approx. 10g (two clips, ~5g each)
- Compliance: RoHS
Ideal for tidy installations in environments where space is limited or a clean, discreet mounting of Teltonika devices on hard surfaces is required.