AikomGo April Promo: free shipping

The OpenetICS 1m Gray Cat 6A UTP LSZH Patch Cable is a 4-pair cable designed for workstation connections and cabinet distribution. It supports frequencies up to 500 MHz and speeds up to 10 Gbps, offering adequate performance for high-speed structured cabling infrastructures.

The UTP construction features 4 pairs of 26 AWG tinned copper conductors and PE foam insulation. The outer jacket is LSZH, halogen-free and flame-retardant, with a thickness of 0.4 mm and a nominal outer diameter of 6.3 + 0.3 mm. It is gray in color. The operating temperature ranges from minus 20 degrees C to plus 75 degrees C.

Electrically, it has a characteristic impedance of 100 ohms plus minus 5 ohms at 100 MHz, a maximum operating voltage of 300 V, a nominal propagation velocity of 75 percent, and PoE Type 4 capacity of up to 90 W. It complies with ISO IEC 11801 2nd Edition, TIA EIA 568 C.2, and EN 50173 standards. Main Features

• Category 6A 4-pair UTP
• Length 1 m, gray color
• Frequency up to 500 MHz and speed up to 10 Gbps
• 26 AWG tinned copper conductors
• Sheath LSZH halogen-free, 0.4 mm thick
• Nominal outer diameter: 6.3 + 0.3 mm
• Impedance: 100 ohms plus or minus 5 ohms at 100 MHz
• PoE Type 4 power capacity: up to 90 W
• Operating temperature: -20 degrees C to +75 degrees C

The OpenetICS 2m Gray Cat 6A UTP LSZH Patch Cable is a 4-pair cable designed for workstation connections and cabinet distribution. It supports frequencies up to 500 MHz and speeds up to 10 Gbps, offering adequate performance for high-speed structured cabling infrastructures.

The UTP construction features 4 pairs of 26 AWG tinned copper conductors and PE foam insulation. The outer jacket is LSZH, halogen-free and flame-retardant, with a thickness of 0.4 mm and a nominal outer diameter of 6.3 + 0.3 mm. It is gray in color. The operating temperature ranges from minus 20 degrees C to plus 75 degrees C.

Electrically, it has a characteristic impedance of 100 ohms plus minus 5 ohms at 100 MHz, a maximum operating voltage of 300 V, a nominal propagation velocity of 75 percent, and PoE Type 4 capacity of up to 90 W. It complies with ISO IEC 11801 2nd Edition, TIA EIA 568 C.2, and EN 50173 standards. Main Features

• Category 6A 4-pair UTP
• Length 2 m, gray color
• Frequency up to 500 MHz and speed up to 10 Gbps
• 26 AWG tinned copper conductors
• Sheath LSZH halogen-free, 0.4 mm thick
• Nominal outer diameter: 6.3 + 0.3 mm
• Impedance: 100 ohms plus or minus 5 ohms at 100 MHz
• PoE Type 4 power capacity: up to 90 W
• Operating temperature: -20 degrees C to +75 degrees C

The OpenetICS 3m Gray Cat 6A UTP LSZH Patch Cable is a 4-pair patch cable designed for connection between workstations or distribution between departments. It supports frequencies up to 500 MHz and speeds up to 10 Gbps, offering adequate performance for high-speed structured cabling infrastructures.

The UTP construction features 4 pairs of 26 AWG conductors made of tinned, braided copper and PE foam insulation. The outer jacket is LSZH, halogen-free and flame-retardant, with a thickness of 0.4 mm, a nominal outer diameter of 6.3 + 0.3 mm, and is gray in color. The operating temperature ranges from minus 20 degrees C to plus 75 degrees C.

Electrically, it has a characteristic impedance of 100 ohms plus minus 5 ohms at 100 MHz, a maximum operating voltage of 300 V, a nominal propagation velocity of 75 percent, and PoE Type 4 capacity of up to 90 W. It complies with ISO IEC 11801 2nd Edition, TIA EIA 568 C.2, and EN 50173 standards. Main Features

• Category 6A 4-pair UTP
• Length 2 m, gray color
• Frequency up to 500 MHz and speed up to 10 Gbps
• 26 AWG braided copper conductors Tinned
• Halogen-free LSZH jacket, 0.4 mm thick
• Nominal outer diameter: 6.3 + 0.3 mm
• Impedance: 100 ohms plus or minus 5 ohms at 100 MHz
• PoE Type 4 power capacity up to 90 W
• Operating temperature: -20 degrees C to +75 degrees C

The OpenetICS 5m Gray Cat 6A UTP LSZH Patch Cable is a 4-pair cable designed for workstation connections and cabinet distribution. It supports frequencies up to 500 MHz and speeds up to 10 Gbps, offering adequate performance for high-speed structured cabling infrastructures.

The UTP construction features 4 pairs of 26 AWG tinned copper conductors and PE foam insulation. The outer jacket is LSZH, halogen-free and flame-retardant, with a thickness of 0.4 mm and a nominal outer diameter of 6.3 + 0.3 mm. It is gray in color. The operating temperature ranges from minus 20 degrees C to plus 75 degrees C.

Electrically, it has a characteristic impedance of 100 ohms plus minus 5 ohms at 100 MHz, a maximum operating voltage of 300 V, a nominal propagation velocity of 75 percent, and PoE Type 4 capacity of up to 90 W. It complies with ISO IEC 11801 2nd Edition, TIA EIA 568 C.2, and EN 50173 standards. Main Features

• Category 6A 4-pair UTP
• Length 3 m, gray color
• Frequency up to 500 MHz and speed up to 10 Gbps
• 26 AWG tinned copper conductors
• Sheath LSZH halogen-free, 0.4 mm thick
• Nominal outer diameter: 6.3 + 0.3 mm
• Impedance: 100 ohms plus or minus 5 ohms at 100 MHz
• PoE Type 4 power capacity: up to 90 W
• Operating temperature: -20 degrees C to +75 degrees C

The OpenetICS 10m Gray Cat 6A UTP LSZH Patch Cable is a 4-pair cable designed for workstation connections and cabinet distribution. It supports frequencies up to 500 MHz and speeds up to 10 Gbps, offering adequate performance for high-speed structured cabling infrastructures.

The UTP construction features 4 pairs of 26 AWG tinned copper conductors and PE foam insulation. The outer jacket is LSZH, halogen-free and flame-retardant, with a thickness of 0.4 mm and a nominal outer diameter of 6.3 + 0.3 mm. It is gray in color. The operating temperature ranges from minus 20 degrees C to plus 75 degrees C.

Electrically, it has a characteristic impedance of 100 ohms plus minus 5 ohms at 100 MHz, a maximum operating voltage of 300 V, a nominal propagation velocity of 75 percent, and PoE Type 4 capacity of up to 90 W. It complies with ISO IEC 11801 2nd Edition, TIA EIA 568 C.2, and EN 50173 standards. Main Features

• Category 6A 4-pair UTP
• Length 10 m, gray color
• Frequency up to 500 MHz and speed up to 10 Gbps
• 26 AWG copper conductors Tinned
• Halogen-free LSZH jacket, 0.4 mm thick
• Nominal outer diameter: 6.3 + 0.3 mm
• Impedance: 100 ohms plus or minus 5 ohms at 100 MHz
• PoE Type 4 power capacity up to 90 W
• Operating temperature: -20 degrees C to +75 degrees C

The Amphenol-Procom RG-58 FME Xtra Low Loss 6-meter cable is an excellent choice for radio connections where signal quality is critical. Using the best low-loss RG-58, it ensures low attenuation (<0.3dB/m at 900MHz) and a very precise 50? impedance. The FME connectors are designed to minimize VSWR, ensuring maximized transfer and compatibility with mobile equipment.

The cable is manufactured under continuous quality control, ensuring high standards and repeatability. Thanks to its rugged construction and excellent signal performance, it is ideal for antenna-to-transceiver connections in professional contexts, even in vehicular environments or with high reliability requirements.

• Type: low-loss RG-58 cable with female FME connectors
• Length: 6m
• Loss at 900MHz: <0.3dB/m
• Impedance: 50? ±1%
• Optimized VSWR thanks to the FME connector design
• Production with continuous quality control
• Rugged, suitable for vehicular or mobile use

The 3-element low-PIM Yagi antenna for the 380-430 MHz band is designed for professional applications requiring directionality and operational reliability. It supports a maximum input power of 150 W and offers a gain of 5 dBd (7.2 dBi), with a 50-ohm impedance and a VSWR of less than 1.5 to 1.

The polarization is linear, selectable vertical or horizontal, with a 3 dB beamwidth of 70 degrees E Plane and 120 degrees H Plane and a front-to-back ratio greater than 15 dB. All metal parts are DC grounded for antistatic protection. The structure is made with a 32 mm diameter aluminum boom and elements, a 12.7 mm diameter aluminum balun, and a fully molded enclosure. The connection is via a 7-16 female connector on a 3 m RG214 U cable. Length approximately 650 mm, weight approximately 1.6 kg, and wind load 64 N at 160 km/h.Main Features

• Operating Frequency 380-430 MHz
• Maximum Input Power 150 W
• Gain 5 dBd 7.2 dBi
• Impedance 50 ohms
• VSWR less than 1.5 to 1
• Linear Polarization Vertical or Horizontal
• Beamwidth 3 dB 70 degrees E Plane 120 degrees H Plane
• Front-to-back ratio greater than 15 dB
• Passive intermodulation less than 143 dBc third-order with 2 transmitters at 43 dBm
• 7-16 female connector on 3 m RG214 U cable
• Length approximately 650 mm
• Weight approximately 1.6 kg
• Wind load 64 N at 160 km/h

The Amphenol-Procom S.3Y-445 antenna is a 3-element Yagi designed for PMR, trunked, and telemetry applications in the 420-470MHz band. It is made with high-quality components (Ø32mm aluminum boom and Ø12.7mm elements), with the balun fully encapsulated in resin for protection from humidity.

It features a maximum input power of 150W, with a gain of 6dBd (8.2dBi), VSWR <1.5:1, and a front-to-back ratio >15dB. The 62° E-plane and 84° H-plane beamwidths ensure good directivity. The connection is via an N female fixed on a 3m RG-213 cable. The antenna is fully DC-grounded, IP68 certified and weighs approximately 1kg, with a length of approximately 740mm. Mounting on dedicated brackets.

• Operating Frequency: 420-470MHz
• Gain: 6dBd (8.2dBi)
• VSWR: <1.5:1
• Impedance: 50?
• Max Power: 150W
• Front-to-back ratio: >15dB
• 3 dB Beamwidth: 62° in E-plane, 84° in H-plane
• Connection: N female on 3m RG 213 cable
• Materials: Aluminum, resin-encapsulated balun
• Protection: IP68; DC-grounded
• Dimensions: Length ~740mm; boom Ø32mm
• Weight: approx. 1kg

The Amphenol-Procom 7043420 antenna is a professional 8-element Yagi antenna for the UHF band (420-470 MHz), designed to offer high directional performance in base station or maritime applications. With a gain of 10 dBd (12.2 dBi) and a narrow beamwidth, it ensures precise and reliable coverage. The aluminum construction and sealed balun with antistatic protection ensure durability, while the N female connection with 3 m RG213 cable simplifies installation.

• Gain 10 dBd (12.2 dBi), vertical or horizontal polarization
• Aperture 45° E-Plane, 54° H-Plane
• Impedance 50 ohms, VSWR < 1.5:1
• Front-to-back ratio > 20 dB
• Maximum power 150 W
• N female connection with 3 m RG213 cable
• Protected balun, aluminum construction with Ø 32 mm boom
• Elements Ø 12.7 mm aluminum, total length 1248 mm
• Weight approx. 3.3 kg, wind load 100 N at 160 km/h
• DC-grounded antistatic protection
• Mounting bracket available separately

Replacement foam ear cushions for headphones are designed to easily and effectively replace worn ear tips, restoring comfort during everyday use. This Motorola Solutions solution is ideal for professional environments where reliability and comfort are essential.

The set includes two foam ear cushions, designed to ensure a proper fit and extend the life of the headphones without compromising performance.

• Set of two replacement foam ear cushions
• Dedicated accessory for headphones
• Dimensions: 4.38 H x 0.75 W x 3.50 L inches
• Metric dimensions: 111.25 mm x 19.05 mm x 88.90 mm

The Amphenol-Procom XPOL panel antenna (model 766.65.12.00) is optimized for TETRA and UHF Trunked Radio applications, ensuring stable performance over a wide band. It features ±45° cross-polarization, ‰¥27dB inter-port isolation, and low passive intermodulation (-153dBc), ensuring a clean signal even in challenging RF environments. Constructed of marine-grade aluminum with a UV-resistant ASA radome, it is lightweight and wind-resistant, with an IP56 rating for outdoor use.

• Cross Polarization ±45°, Gain 12dBi
• 3dB Aperture: 38° (E-Plane), 68° (H-Plane)
• Impedance 50?, VSWR <1.5:1, front-to-back >23dB
• Inter-Port Isolation ‰¥27dB, PIM -153dBc
• Maximum Power 2 x200W, PIP 25kW
• Connectors 2 x7/16DIN(f) (N(f) or 4.3 10(f) available)
• 5083 aluminum body, ASA UV radome, white color
• Dimensions 920x400x170mm, weight approx. 7kg
• Wind resistance 297N @160km/h, withstands up to 300km/h
• IP56 protection grade, operating temperature from 40°C to +75°C

The 766.65.15.00 panel antenna from Amphenol-Procom is a high-performance solution for TETRA networks and UHF Trunked Radio systems. Featuring ±45° cross-polarization, 15dBi gain, and high-gain isolation (‰¥27dB), it ensures reliable transmissions even in complex RF environments. The rugged marine aluminum design with ASA UV radome allows continuous use in harsh outdoor environments while maintaining low wind loading and low passive intermodulation (PIM -153dBc).

• Cross Polarization ±45°, Gain 15dBi
• Aperture 17° (E-Plane), 68° (H-Plane)
• Impedance 50 ohm, VSWR < 1.5:1
• Inter-Port Isolation ‰¥ 27 dB, PIM -153 dBc
• Front-to-back > 23 dB
• Maximum Power 2 x 400 W, PIP 25 kW
• Connector 7/16 DIN(f); N(f) and 4.3-10(f) options
• 5083 aluminum construction and UV-resistant ASA radome
• Dimensions 1840x400x170 mm, weight approx. 12.5 kg
• Wind load 593 N at 160 km/h, resistance up to 270 km/h
• IP56 protection, operating temperature -40 °C to +75 °C