AikomGo September Promo: free shipping

The 13.5 Vdc 35 A linear power supply is designed to ensure high performance and long-term reliability. Thanks to its linear technology, it eliminates any radio interference emissions, a key feature for use in telecommunications and sensitive professional electronics applications.

The PT 135A model delivers up to 35 A nominal (50% duty cycle) with a stable 13.5 Vdc voltage, maintaining low ripple and high load stability. It is equipped with a special high-isolation input transformer, making it highly resistant to atmospheric discharges and mains disturbances.

Its integrated protections include overload, permanent short circuit, and overvoltage, with automatic output shutdown in the event of a fault due to lightning strikes. The fanless design ensures completely silent operation, while the robust, certified construction (CE, EMC, LVD, RoHS) ensures long-lasting operation even in harsh conditions.Main Features

• 13.5 Vdc output - 35 A nominal (50% duty cycle)
• Linear technology with total absence of radio interference
• Low ripple and high load stability
• Protection against overload, permanent short circuit, and overvoltage
• Special high-isolation input transformer
• Excellent immunity to mains lightning strikes
• Fanless, silent operation
• Dimensions: 185 x 300 x 160 mm
• Certifications: CE, EMC 2014/30/EU, LVD 2014/35/EU, RoHS

The 13.5 Vdc 35 A linear power supply with battery is designed to ensure stable and safe power for telecommunications equipment and professional devices that require absolute continuity of service. Thanks to the integrated interface, it supports external buffer batteries from 65 to 120 Ah, with automatic charging at constant current and voltage.

The PT 135-IB model supplies up to 35 A (28-30 A continuous) with a typical ripple of only 20 mV, ensuring maximum power quality and reduced interference. The highly isolated input transformer provides excellent immunity to lightning strikes and power failures, while integrated protections ensure safety against overloads, short circuits, and overvoltages.

Compact, reliable, and quiet thanks to natural ventilation, it is designed for continuous operation without the need for maintenance, with a service life of more than 15 years.

• 13.5 Vdc output - 35 A max (28-30 A continuous)
• Integrated 5-7 A battery charger
• Compatible with external 12 V batteries from 65-120 Ah
• Typical RMS ripple: 20 mV
• Protection against overloads, overvoltages, and short circuits
• High immunity to mains lightning strikes
• Natural ventilation and silent operation
• Dimensions: 185 x 300 x 190 mm
• Weight: 9 kg

The 13.5 Vdc 50 A switching power supply is designed to ensure stable and safe power supply to high-power radio systems. With a fixed 13.5 Vdc output voltage, it eliminates the risk of errors due to manual adjustments, offering ideal operational continuity for large radio stations.

The PTS-150 model delivers up to 50 A continuous and 55 A peak, with high-efficiency switching technology that allows for continuous use 24 hours a day. Thanks to integrated overload and overtemperature protections, it guarantees maximum safety and reliability even in harsh conditions.

The temperature-controlled ventilation system maintains optimal performance while reducing noise, while the compact and lightweight structure makes it easy to install and manage in any professional environment.

• Fixed output voltage: 13.5 Vdc
• Output current: 50 A continuous, 55 A peak
• High-efficiency switching technology
• Protections: overload and overtemperature
• Thermal-controlled fan
• Continuous operation 24/7
• Input voltage: 240 Vac
• Dimensions: 260 x 110 x 260 mm
• Weight: 2.5 kg

The 24 Vdc 30 A switching power supply is designed to provide safe and stable power in critical and professional applications. Thanks to highly efficient switching technology, it guarantees continuous 24/7 operation with no interference emissions, ideal for telecommunications systems and sensitive environments.

The PTS-230 model delivers up to 30 A, maintaining compact dimensions and a robust structure with an all-metal case. Integrated overload and overtemperature protections ensure safe and reliable operation, while the speed-controlled fan cooling system guarantees quiet operation and a long service life.

Made in Italy, this power supply is a professional and durable choice for those requiring high performance and operational continuity.

• 24 Vdc - 30 A output
• High-efficiency switching technology
• Continuous maintenance-free operation
• No interfering emissions
• Protections: overload and overtemperature
• Speed-controlled fan for quiet operation
• Compact structure and metal housing
• Applications: professional and military radio telecommunications, automation, laboratories, service

The Pelco PTZ-CPNL-G metal panel allows for discreet and robust mounting of PTZ cameras within suspended ceilings. The compact, professional design fits perfectly into sophisticated and high-traffic architectural settings, maintaining a clean aesthetic thanks to the integrated housing in the ceiling.

The panel facilitates installation control and ensures mechanical stability, making it perfect for critical applications. Ideal for environments such as schools, airports, retail stores, and offices, it effectively combines discretion and functionality.

• Suitable for ceiling-mounted PTZ cameras
• Material: metal, gray finish
• Panel design for invisible installation
• Compact and robust, perfect for professional settings
• Ideal for public or commercial environments

The Panorama Antennas PUG TNC S1 is a rugged, pre-tuned UHF antenna designed for use with modems and PMR radios on frequencies from 380-400MHz. It offers a typical isotropic gain of 4dBi (equivalent to 2dB over a quarter wavelength) and low reflection thanks to a VSWR of less than 2.1:1.

The engineering plastic design ensures resistance to harsh environments, while the 420mm length optimizes transmission performance. The antenna features a male TNC connector, 50? impedance, and supports power outputs up to 5W. It is perfect for mobile or fixed applications in professional communications.

• Operating Frequency: 380-400MHz (S1 band)
• Isotropic Gain: 4dBi (2dB vs. 1/4 wavelength)
• Typical VSWR: <2.1:1
• Impedance: 50?
• Maximum Power: 5W
• Connector: TNC male
• Length: 420mm
• Diameter: 16mm
• Operating Temperature: -40°C to +80°C
• Material: engineering plastic

The PowerVerter 18A 24V-12V isolated is a DC-DC voltage converter designed to power 12Vdc equipment from 24Vdc mobile electrical systems, typically found in diesel vehicles and boats. It is part of the PowerVerter range, optimized for high-volume applications on trucks, buses, agricultural vehicles, and marine vehicles.

The isolated version guarantees greater than 400 Vrms isolation between input, output, and case, making it suitable for marine applications. The anodized aluminum and reinforced polycarbonate enclosure offers IP53 protection against dust and splashes, with no ventilation holes or accessible external fuses.

The no-load current draw of less than 15 mA reduces the impact on the vehicle battery, while the three-point Click-n-Fit mounting system simplifies installation even on uneven surfaces. A green LED indicates the presence of the output, making it easy to check. Main Features

• Current 18 A continuous, 22 A intermittent
• Input 24 Vdc nominal, range 17-32 Vdc
• Output 13.6 Vdc +15% -20%
• Typical efficiency 85% for isolated units
• Isolation >400 Vrms between input, output, and case
• Output noise <50 mV peak-to-peak at continuous load
• No-load current <15 mA
• Overcurrent, overtemperature, and transient protection
• Transient protection compliant ISO7637-2
• ESD protection compliant with ISO10605 and ISO14982
• IP53 rating
• Operating temperature range: -25°C to +30°C at full specification, up to +80°C with linear derating
• Dimensions: 217 x 87 x 50 mm
• Weight: 775 g
• CE and automotive E-marking

The Alfatronix PowerVerter PV6s 24V to 12V 6A non-isolated DC converter is part of a complete range of 3A to 30A converters available in isolated or common-ground versions. It is designed to convert 24V DC to 12V DC in high-volume applications on industrial vehicles, buses, construction, forestry, agricultural equipment, and boats.

The PV6s version is non-isolated with common negative and supplies 6A continuously and 10A intermittently. Intermittent current can be delivered for up to 2 minutes followed by 8 minutes of rest. High efficiency contributes to long-term operational reliability. Main Features

• 24 Vdc to 12 Vdc conversion
• 6 A continuous and 10 A intermittent current
• Non-isolated common negative version
• PowerVerter range from 3 A to 30 A
• Intermittent current: 2 minutes ON, 8 minutes OFF
• Overcurrent and overtemperature protection
• Protection against transients and catastrophic failures
• Click-n-Fit clip mounting
• CE and e-Mark certification

The 19'' rack cabinet with battery trays is a solution designed for the safe and orderly housing of backup batteries in professional applications. Thanks to its reinforced structure, it supports a maximum load of 250 kg, ensuring robustness and stability even in high-density configurations.

The design features one open side and three removable sides, a feature that greatly simplifies wiring, maintenance, and module replacement. The cabinet is supplied pre-assembled, ready for installation.

It comes complete with trays and can hold up to 16 12 V 24 Ah monoblocks or alternatively 8 12 V 65-80 Ah monoblocks, making it extremely versatile for various power supply configurations.

• 19'' rack structure with battery trays included
• Load capacity up to 250 kg
• 1 open side and 3 removable sides for maximum accessibility
• Supplied assembled
• Housing up to 16 12 V 24 Ah monoblocks
• Housing up to 8 12 V 65-80 Ah monoblocks

The wsAP ac lite wall-mounted Wi-Fi access point is a MikroTik solution designed for hospitality environments that require reliable wireless connectivity, discreet installation, and clean cable management. It is suitable for hotels, shopping malls, hospitals, and airports, and its enclosure is designed to fit standard wall outlets, easily integrating into the environment.

The device offers concurrent dual-band Wi-Fi coverage at 2.4 GHz and 5 GHz, supports the 802.11ac standard as well as legacy standards. It has 3 10/100 Ethernet ports, including one on the back for PoE-in and two LAN ports behind the front door. MikroTik also integrates a USB 2.0 port that can be used for charging mobile devices or for storage, as well as an RJ11 pass-through for connecting a desk phone and simplifying cable management.

On the hardware side, it includes a 650 MHz QCA9531 CPU, 64 MB of memory and 16 MB of Flash storage. It supports 802.3af/at PoE-in power supply, PoE-out passthrough on Ethernet 3 and input voltage from 18 to 57 V, with a power consumption of 10 W. The operating system is RouterOS.

Main Features

• Wall-mounted access point for hospitality networks such as hotels, shopping malls, hospitals and airports.
• Concurrent dual-band Wi-Fi at 2.4 GHz and 5 GHz.
• Support for 802.11b/g/n and 802.11ac protocols.
• 3 10/100 Ethernet ports.
• 1 USB 2.0 port with a maximum output current of 500 mA.
• RJ11 pass through for desk phone.
• 802.3af/at PoE-in power supply and PoE-out passthrough on Ethernet 3.
• QCA9531 CPU with a nominal frequency of 650 MHz.
• 64 MB memory and 16 MB flash storage.
• Dimensions 112 x 126 x 30 mm.
• Operating temperature range from -40 °C to +60 °C tested.
• RouterOS operating system and 7 LEDs.

The RFID reader with base is designed to streamline bodycam management within structured organizations. By reading RFID cards or tags, each worker can independently collect the bodycam, ensuring that the device remains assigned to the same user for the entire shift.

Integrated into the Motorola Solutions ecosystem, this reader helps streamline daily operational processes, reducing assignment times and improving bodycam traceability and chain of custody. The product is suitable for use with VB400 bodycams and is also compatible with V500 bodycams as an RFID assignment solution. Main Features

• RFID reader with dedicated base
• Reads RFID cards and tags for bodycam assignment
• Automatic bodycam assignment to the operator
• Compatible with Motorola Solutions VB400 and V500 bodycams
• Simplifies shift start and improves device traceability

RFID cards for bodycams are designed to improve the bodycam assignment process, making the process quick, secure, and efficient. Used in conjunction with an RFID reader, they allow operators to easily associate a bodycam with an individual user, helping maintain order and control during pickup and drop-off.

This Motorola Solutions solution is suitable for professional settings where optimizing equipment management time and ensuring a structured bodycam experience are essential. Each pack includes 10 RFID cards, ideal for environments with multiple operators and frequent shifts.

Key Features

• Use with a dedicated RFID reader
• Supports secure bodycam assignment
• Pack of 10 RFID cards
• Compatible with Motorola Solutions bodycams