AikomGo September Promo: free shipping

The Atel Antennas 3x3 MIMO dual-band antenna is designed to cover the 2.4-2.5GHz and 4.9-5.925GHz Wi-Fi bands, ideal for high-performance wireless networking solutions. With a standard 50? impedance and a VSWR of less than 2, it ensures high connection reliability.

Constructed with three elements in a MIMO configuration, it offers a maximum gain of 4.5±1dBi and an average gain of -2±0.5dBi. The antenna is omnidirectional, with vertical polarization, and can handle up to 3W of power. It is equipped with a 100mm long 1.13mm coaxial cable with a standard IPEX connector and a 3M6677 adhesive tape fastening system.

Compact and versatile, it has a length of 50mm and a radiator thickness of 0.15mm, with a weight of only 1.8g. Designed for indoor or protected outdoor use, it operates in a range of -40°C to +85°C.

Main Features

• Bands: 2.4-2.5GHz and 4.9-5.925GHz
• Configuration: 3x3 MIMO
• Impedance: 50?
• VSWR: <2.0
• Maximum Gain: 4.5±1dBi
• Average Gain: -2±0.5dBi
• Radiation: Omnidirectional
• Polarization: Vertical
• Maximum Power: 3W
• Cable: 1.13mm coaxial, 100mm
• Connector: IPEX 20278 112R 13
• Dimensions: 50mm x 0.15mm
• Weight: 1.8g
• Mounting: 3M6677 adhesive
• Operating temperature: -40°C à· +85°C

Designed for the TETRA/UHF 380-430MHz band, the Atel Antennas mobile antenna with a 1/4 configuration ensures reliable transmissions in mobile professional environments. With 50? impedance and 2.14dBi gain, it supports up to 20W of power with a VSWR of less than 2.0.

Radiation is omnidirectional with vertical polarization, ideal for uniform coverage. The body is made of polyamide 6 with a Pibiflex 4612 rod and gasket, offering mechanical resistance and lightness. The base measures 64x46mm and the weight is 80±20g. Installation takes place on sheet metal up to 4mm through a 15x15mm square hole or a Ø19mm round hole.

The antenna is optimized for professional vehicular environments and guarantees functionality even in critical environmental conditions, with operating temperatures between -30°C and +80°C.

Main features

• Band: TETRA/UHF 380-430MHz
• Type: 1/4 vehicular
• Impedance: 50?
• Gain: 2.14dBi
• Max power: 20W
• VSWR: <2.0
• Polarization: vertical, omnidirectional
• Materials: Pibiflex 4612, polyamide 6
• Base: 64 x 46mm
• Weight: 80±20g
• Mounting: 15x15mm or Ø19mm hole, sheet metal ‰¤4mm
• Operating temperature: -30°C à· +80°C

p>The Atel Antennas active magnetic antenna is designed for use with GPS GLONASS Galileo systems, covering the frequencies 1575.42MHz and 1600MHz. Powered at 3 5V, it guarantees good performance with a gain of 23dB at 2.7V or 25dB at 5V, maintaining a noise figure between 1.8 and 2.2dB, ideal for precise positioning applications.

Constructed of black ABS and equipped with a magnetic base, it is robust and compact (33.2x31.5x13.5mm), weighing only 50g. The 5m RG 174 cable with male SMA connector facilitates installation on vehicles or metal surfaces. RHCP polarization and VSWR less than 2.0 ensure stability and reliability even in harsh environments, with operating temperatures from -30°C to +80°C.

Main Features

• Type: Magnetic active patch antenna
• Bands: GPS GLONASS Galileo 1575.42 & 1600MHz
• Impedance: 50?
• Gain: 23dB (2.7V) / 25dB (5V)
• Noise figure: 1.8-2.2dB
• Polarization: RHCP
• VSWR: <2.0
• Power supply: 3-5V, consumption 10mA (2.7V) or 20mA (5V)
• Cable: RG 174, length 5000mm
• Connector: SMA male
• Material: ABS, black color
• Dimensions: 33.2x31.5x13.5mm
• Weight: 50g
• Operating temperature: -30°C à· +80°C

The 2G/3G/4G/5G 5 dBi omnidirectional antenna is designed for multi-standard applications and covers ISM, GSM, DCS, PCS, UMTS, WiFi, Bluetooth, LTE, and 5G bands. Atel-Antennas offers it with omnidirectional emission, vertical polarization, and 5 dBi gain, for installations requiring coverage over a wide frequency spectrum from 698 MHz to 3.8 GHz.

The structure is made of ABS, PVC, and MOPLen, is gray, weighs 380 g, and measures 340 x 50 mm with a height of 155 mm. The product supports wall or pole mounting, 50 Ohm impedance, 10 W maximum power, 5000 mm CO100 cable and SMA male connector or available on request.

Main Features

• Omnidirectional antenna for 2G, 3G, 4G and 5G networks.
• Supported frequency range: ISM 868 MHz, GSM 900 MHz, DCS 1800 MHz, PCS 1900 MHz, UMTS 2.1 GHz, WiFi and Bluetooth 2.4 GHz, LTE 698-860 MHz and 2500-2710 MHz, 5G 3400-3800 MHz.
• 5 dBi gain with vertical polarization.
• Omnidirectional emission.
• Impedance of 50 Ohm and maximum power of 10 W.
• V.S.W.R. up to less than 2 or less than 2.5 depending on the band.
• 5000 mm CO100 cable.
• SMA male connector or on request.
• Wall or pole mounting.
• ABS, PVC and MOPLen materials, gray color, weight 380 g.

The Atel Antennas vehicle shark antenna combines LTE connectivity (790-960MHz / 1710-2700MHz), dual-band Wi Fi (2.4-2.485GHz and 5.25-5.85GHz), and GPS GNSS/Galileo satellite positioning (1580MHz ±28MHz) in a single device. Thanks to its compact and aerodynamic configuration, it is ideal for vehicles requiring integrated solutions and reliable performance.

The LTE and Wi Fi sections offer 2.14dBi gain with VSWR <3.3 and <3.0 respectively. The active GPS module provides 18dB gain at 2.7V or 22dB at 5V, with a noise figure between 1.7 and 2.1dB and VSWR <2.0. The antenna is made of polyamide 6 with Arnitel EM400 gasket, measures 95 x 52 x 65mm and weighs 150g. It is designed for mounting on sheet metal (max 4mm) via a 15x15mm square hole or Ø19mm round hole.

Each section is equipped with a male SMA connector: RG 316 (LTE), RG 174 (Wi Fi and GPS), length 180mm. The antenna is designed to operate in harsh environmental conditions, with a temperature range of -40°C to +85°C.

Main Features

• LTE Bands: 790-960 / 1710-2700MHz
• Wi-Fi Bands: 2.4-2.485GHz / 5.25-5.85GHz
• GPS Band: 1580±28MHz
• Gain: 2.14dBi (RF), 18-22dB (GPS active)
• GPS Noise Figure: 1.7-2.1dB
• VSWR: <3.3 (LTE), <3.0 (Wi-Fi), <2.0 (GPS)
• Polarization: Vertical (RF), RHCP (GPS)
• Impedance: 50?
• Max power: 20W (RF)
• Connectors: 3x SMA male
• Cables: RG 316 (LTE), RG 174 (Wi Fi/GPS), 180mm
• Materials: polyamide 6, Arnitel EM400
• Mounting: 15x15mm or Ø19mm hole, max 4mm sheet metal
• Dimensions: 95 x 52 x 65mm
• Weight: 150g ±20g
• Operating temperature: -40°C à· +85°C

The Atel Antennas 1/4 mobile antenna operates in the VHF band 130-230MHz, with 50? impedance and peak power up to 50W. It offers 2.14dBi gain, omnidirectional emission and vertical polarization, ensuring wide coverage and stable performance with VSWR <1.5 at ±6% F‚€ :contentReference[oaicite:4]{index=4}.

The 500mm rod is made of Pibiflex 2564 (extendable to 74°), with a polyamide 6 cap and Pibiflex 50 gasket. The compact base (64x46mm) is equipped with holes for mounting on a square (15x15mm) or round (Ø19mm) bracket. Lightweight (110g) and durable, it operates in a range from -30°C to +80°C. Connector and cable length available upon request, ideal for vehicle installations. :contentReference[oaicite:5]{index=5}

Main Features

• Type: 1/4 VHF mobile antenna
• Band: 130-230MHz
• Impedance: 50?
• Maximum power: 50W (peak)
• Gain: 2.14dBi
• Polarization: vertical, omnidirectional emission
• VSWR: <1.5 at ±6% F‚€
• Rod: Pibiflex 2564, length 500mm, elevation 74°
• Cap: polyamide 6; gasket: Pibiflex 50
• Structure: 64x46mm base
• Mounting: 15x15mm square hole or Ø19mm round hole
• Weight: 110g
• Operating temperature: -30°C à· +80°C
• Connector and cable on request

Designed for multi-band LTE applications, the Atel Antennas directional antenna covers three frequency ranges: 680-790MHz, 790-960MHz and 1710-2700MHz. With 10dBi gain, 50? impedance and 50W maximum power, it guarantees high performance in outdoor mobile communications. The VSWR is less than 2.0 in the lower band and <1.5 in the other two, ensuring optimal transmission efficiency.

The polarization is vertical with directional emission. The gray ABS body withstands harsh environmental conditions, with operating temperatures from -30°C to +80°C and wind resistance up to 120km/h. The dimensions are 162x142x45mm and the low weight facilitates installation.

It is equipped with a 5m cable (type CO100mm) and a male SMA connector. It can be mounted on poles with a diameter of Ø20 to Ø55mm, or on walls, making it suitable for multiple LTE usage scenarios.

Main features

• LTE bands: 680-790 / 790-960 / 1710-2700MHz
• Impedance: 50?
• Gain: 10dBi
• Max power: 50W
• VSWR: <2.0 (680-790MHz), <1.5 (other bands)
• Polarization: vertical
• Emission: directive
• Connector: SMA male
• Cable: 5m (CO100mm)
• Material: grey ABS
• Dimensions: 162 x 142 x 45mm
• Wind resistance: 120km/h
• Operating temperature: -30°C à· +80°C
• Mounting: on a Ø20-55mm pole or on a wall

The Atel-Antennas LTE/GPS/Wi-Fi/TETRA multiband antenna is designed for mobile applications requiring the combined support of multiple radio technologies in a single device. The product integrates dedicated sections for LTE, GPS GNSS Galileo, TETRA 430-470 MHz and Wi-Fi 2.4-5.8 GHz, with a black polyamide 6 structure, 95 x 52 mm base and 125 + or - 2 mm shaft inclined at 74 degrees.

The LTE section operates in the 790-960 MHz and 1710-2700 MHz bands with 50 Ohm impedance, 10 W maximum power, V.S.W.R. less than 3, omnidirectional emission, vertical polarization and 2.14 dBi gain. The connection uses RG 174 cable 300 plus or minus 10 mm with a male FME connector.

The Galileo GPS GNSS section uses an active planar patch antenna with a center frequency of 1580 MHz, a bandwidth of plus or minus 28 MHz, a V.S.W.R. less than 2, an impedance of 50 Ohm, and RHCP polarization. The indicated power supply is 2.7 to 5.1 V, consumption of 10 plus or minus 1 mA at 2.7 V and 16 plus or minus 1 mA at 5.0 V, gain amplifier of 18 plus or minus 1 dB at 2.7 V and 22 plus or minus 1 dB at 5.0 V, patch antenna gain of 2 dB and RG 174 cable of 300 plus or minus 20 mm with female FME connector.

For the TETRA 430-470 MHz section, Atel-Antennas declares a 1/4 l mobile antenna with impedance of 50 Ohm, maximum power of 10 W, V.S.W.R. less than 1.8, omnidirectional emission, vertical polarization and gain of 2.14 dBi. The connection is made via 300 RG316 cable plus or minus 20 mm with a male FME connector.

The Wi-Fi section covers the 2400-2485 MHz and 5250-5850 MHz bands with 50 Ohm impedance, maximum power of 10 W, V.S.W.R. less than 3, omnidirectional emission, vertical polarization and gain of 2.14 dBi. The indicated cable is RG 174 220 plus or minus 20 mm with SMA male connector.

The specifications are completed by the operating temperature from -30 to +80 degrees Celsius, 15 x 15 mm square mounting hole or 19 mm diameter round hole and net weight of 180 plus or minus 20 g.

Main features

• Mobile multi-band antenna for LTE, GPS GNSS Galileo, Wi-Fi and TETRA 430-470 MHz
• LTE section with 790-960 MHz and 1710-2700 MHz bands
• GPS GNSS Galileo section with central frequency of 1580 MHz
• TETRA 430-470 MHz section with V.S.W.R. less than 1.8
• 2.4-5.8 GHz Wi-Fi section with male SMA connector
• Omnidirectional emission and vertical polarization on the main radio sections
• Polyamide 6 structure, black color and 95 x 52 mm base
• Operating temperature from -30 to +80 degrees Celsius

The Galileo 380-430 MHz GPS GNSS TETRA antenna combines a TETRA radio section and a section dedicated to GPS, GNSS, and Galileo satellite reception in a single product. Atel-Antennas offers a mobile solution designed to integrate omnidirectional communication and positioning, with a compact structure and specific components for both functions.

The TETRA section operates in the 380-430 MHz range with an impedance of 50 Ohm, a maximum power of 10 W, a V.S.W.R. less than 2, vertical polarization, and omnidirectional emission. The declared gain is 2.14 dBi, with 150 ± 20 mm RG316 cable and a male FME connector.

The Galileo GPS GNSS section uses an active planar patch antenna with a center frequency of 1580 MHz, a bandwidth of ± 28 MHz, a V.S.W.R. less than 2.0, impedance of 50 Ohm and RHCP polarization. Also indicated are a supply voltage of 2.7 to 5.1 V, consumption of 10 plus or minus 1 mA at 2.7 V and 16 plus or minus 1 mA at 5.0 V, amplifier gain of 18 plus or minus 1 dB at 2.7 V and 22 plus or minus 1 dB at 5.0 V, patch antenna gain of 2 dB, noise figure of 1.7 plus or minus 2.1 dB, RG 174 cable of 180 plus or minus 10 mm and a male SMA connector.

From a construction point of view, Atel-Antennas makes the product with a Polyamide6 cap, AmitelEM400 gasket and Pibiflex 2564 rod, in black. The base dimensions are 95 x 52 mm, the net weight is 230 g, while the mounting requires a 15 x 15 mm square hole or a 19 mm diameter round hole. The declared operating temperature is between -30 °C and +80 °C.

Main features

• Mobile antenna with TETRA section and Galileo GPS GNSS.
• TETRA frequency range 380-430 MHz.
• Galileo active planar patch GPS GNSS antenna.
• Central frequency of the satellite section 1580 MHz.
• TETRA gain of 2.14 dBi.
• Omnidirectional emission and vertical polarization for the TETRA section.
• RHCP polarization for the Galileo GPS GNSS section.
• Male FME connector for TETRA and male SMA connector for Galileo GPS GNSS.
• Operating temperature range: -30°C to +80°C.
• Base: 95 x 52 mm and net weight: 230 g.

The Atel Antennas mobile antenna integrates three systems in a single device: a VHF 130-230MHz antenna in 1/4 configuration and a UHF 380-500MHz antenna in 5/8, plus an active GPS GNSS/Galileo module with RHCP polarization on 1580MHz. With 50? impedance, it supports power up to 50W on the radio bands and has a gain of 2.14dBi for VHF/UHF, with VSWR <2.2.

The GPS GNSS module is powered at 2.7-5V with a gain of 18dB (2.7V) or 22dB (5V), a noise figure of 1.7-2.1dB and a VSWR <2.0. The antenna features a 500mm Pibiflex rod, polyamide cap and Arnitel EM400 gasket. It comes with RG 316 cable (150mm) with male FME connector and RG 174 extension (5m) with female/male SMA connectors.

The base measures 95 x 52mm, with mounting on a 15x15mm square hole or Ø19mm round hole, weighs 180g and resists from -30°C to +80°C. Compact and versatile, it is ideal for vehicle installations requiring integrated radio communications and GPS tracking.

Main Features

• Bands: VHF 130-230MHz (1/4), UHF 380-500MHz (5/8), GPS GNSS/Galileo 1580±28MHz
• Impedance: 50?
• Power: 50W (peak VHF/UHF)
• Gain: V/UHF 2.14dBi; Amplified GPS 18dB @2.7V / 22dB @5V
• GPS noise figure: 1.7-2.1dB
• Polarization: vertical (V/UHF), RHCP (GPS)
• VSWR: <2.2 for V/UHF, <2.0 for GPS
• Rod: Pibiflex 2564, length 500mm
• Materials: polyamide cap, Arnitel EM400 gasket
• Cables and connectors: RG 316 150mm FME M, RG 174 5m SMA F/M extension cable
• Base: 95 x 52mm, 15x15mm or Ø19mm holes
• Weight: 180g
• Operating temperature: -30°C à· +80°C

The T-AT960.10-BU VHF GPS/GNSS/Galileo combination antenna from Atel-Antennas is an integrated solution for mobile applications requiring VHF and UHF radio communications along with GPS, GNSS, and Galileo satellite reception. It integrates a 1/4-wave antenna for VHF, a 5/8-wave antenna for UHF, and an Active Planar Patch for the GPS section.

The VHF band covers 130 - 230 MHz with 50 Ohm impedance, omnidirectional emission, and vertical polarization. The GPS section operates at 1580 MHz with a bandwidth of 28 MHz above and 28 MHz below the center frequency, V.S.W.R. less than 2.0 and RHCP polarization. Main Features

• VHF Band: 130 - 230 MHz
• GPS Center Frequency: 1580 MHz
• GPS Bandwidth: 28 MHz above and 28 MHz below the center frequency
• GPS Antenna: Active Planar Patch Type
• Impedance: 50 Ohm
• Maximum Power: 50 W Peak
• V.S.W.R. Less than 2.2 VHF and less than 2.0 GPS
• VHF Vertical Polarization and RHCP GPS
• Gain 2.14 dBi
• GPS Patch Gain 2 dB
• Whisker Length 500 mm
• VHF Cable RG 316 mm 150 mm
• VHF FME Connector m
• GPS Cable RG 174 mm 180 mm
• GPS Connector SMA m
• Operating Temperature -30°C to +80°C

The T-AT960.10 mobile antenna from Atel Antennas combines three technologies in a single compact device: VHF (130-230MHz) and UHF (380-500MHz) in mobile configuration (1/4 for VHF, 5/8 for UHF), as well as an active module for GPS GNSS/Galileo with RHCP polarization, centered on 1580MHz. With a standard impedance of 50? and a maximum power of 50W, it offers a gain of 2.14dBi for the V/UHF bands and an amplified gain of 18dB (at 2.7V) or 22dB (at 5V), with noise of only 1.7-2.1 dB.

Made of robust materials (polyamide cap, ArnitelEM400 gasket, Pibiflex shaft), it has a 150mm RG-316 cable with male FME connector, plus a 5m RG-174 extension cable with male/female SMA connector. Operational from -30°C to +80°C, it mounts in 15x15mm square holes or Ø19mm round holes. Compact and lightweight (180g), it is perfect for vehicles requiring integrated radio communication and GPS positioning.

Main Features

• VHF 130-230MHz (1/4) and UHF 380-500MHz (5/8) bands
• Impedance: 50?
• Maximum power: 50W (peak V/UHF)
• V/UHF gain: 2.14dBi
• GPS GNSS/Galileo active module: center frequency 1580MHz, amplifier gain 18dB (2.7V) or 22dB (5V), noise figure 1.7-2.1dB
• GPS polarization: RHCP, V/UHF vertical, omnidirectional emission
• Cables and connectors: RG 316 150mm FMEm + RG 174 5m SMAF/SMAM extension cable
• Materials: polyamide cap, ArnitelEM400 gasket, Pibiflex rod
• Operating temperature: -30°C à· +80°C
• Mounting dimensions: 15x15mm square hole or Ø19mm round hole
• Weight: 180g
• VSWR: < 2.2 (V/UHF), < 2.0 (GPS)