AikomGo September Promo: free shipping
Valid until 30 September 2026
Consult over 2,000 available products and purchase the most suitable solutions for your next projects, without transport costs.
The discount is automatically applied at checkout, without the need for promotional codes.
The promo is valid only for shipment to Italy.
Wall Mount Camera Holder
This Avigilon wall mount camera bracket is designed for professional applications requiring a stable and durable mounting. The 13-inch arm allows for precise camera positioning, maintaining mechanical strength and aesthetic consistency in wall installations.
The die-cast aluminum construction and gray powder-coated finish contribute to the mount's durability, making it suitable for environments where reliable components and high-quality construction are required.
Key Features- Wall mount with 13-inch arm
- Compatible with 1.5-inch NPT adapter
- Die-cast aluminum construction
- Grey powder-coated finish
- Weight 1.5 kg
- Dimensions 334 x 170 x 99.5 mm
Indoor/Outdoor Wall Mount for Camera
The WMVE Series Indoor Outdoor Camera Wall Mount is designed for lightweight indoor and outdoor installations. Pelco's aluminum construction with a polyester powder coating makes it suitable for direct mounting on a wall or any vertical surface, with cable routing from the back of the mount or through a 3/4" (1.9 cm) bottom conduit access.
The series includes two variants: the WMVE-SR in a light gray finish, designed for use with Next Gen Sarix Enhanced environmental models, IMEx19-1P, IMEx19-1EP, IM-VEPM, IMPBB-EP, IE-P, and Camclosure 2 Series pendant mounts; and the WMVE-SW in a white finish, designed for use with Next Gen Sarix Enhanced indoor models, IMEx19-1P, and IMPBB-P indoor pendant mounts. The mount can also be adapted for pole mounting using the PA101 adapter.
Key Features
- Supports indoor and outdoor installations
- Aluminum construction
- Light gray or white polyester powder coat finish depending on model
- Wall or vertical surface mount
- Cable routing through the back of the mount
- One 3/4" conduit access on the underside
- Attachment with 1/4" hardware (not included), up to 4 anchor points
- Convertible for pole mounting with the PA101 adapter
- Unit weight: 1.0 lb (0.45 kg)
- Dimensions shown in the technical drawing: 6.59" x 3.75" x 2.95" (16.59 cm x 9.40 cm x 7.42 cm)
White indoor wall bracket
Pelco's white indoor wall mount is designed for mounting on vertical surfaces, providing secure and reliable mounting for cameras in indoor environments. Its aluminum construction ensures durability, while cabling options simplify installation. With the PA101 adapter, it can quickly be converted to a pole mount, increasing flexibility and compatibility with various project needs.
The mount is compatible with Sarix Enhanced (including Next Generation), Sarix Professional, and Camclosure 2 pendants, ensuring integration with numerous models in the Pelco catalog. The white color blends discreetly into indoor settings and is NDAA compliant. Key Features
- Indoor installation on vertical surfaces
- Material: Aluminum, robust and durable construction
- Compatibility: Sarix Enhanced pendant (including Next Generation), Sarix Professional, and Camclosure 2
- Pole mount conversion with PA101 adapter
- Simplified wiring options
- Color: White
- NDAA compliant
- Type: Wall mount
Fast desktop charging base
The Desktop Rapid Charging Base is an accessory designed for fast charging with desktop installation. Motorola Solutions offers this product upon request, but the page indicates that it is currently out of stock.
This solution is suitable for those looking for a desktop charging accessory to integrate into workstations or professional environments, with simple configuration and dedicated use.
Main Features- Desktop Rapid Charging Base
- Desktop format
- Product upon request
- Currently out of stock
IMPRES Single Charger for MOTOTRBO Radios
The Motorola IMPRES single charger is designed to efficiently charge batteries used in MOTOTRBO portable radios. IMPRES technology enables direct communication between the charger and the battery, optimizing each charge cycle and reducing degradation over time. This intelligent system ensures long battery life and reliable performance even under heavy use. The charger is compact, rugged, and suitable for use in workstations, service vehicles, or industrial environments. It is compatible with all MOTOTRBO batteries and radios equipped with IMPRES technology.
Key Features- Intelligent charging using Motorola IMPRES technology
- Compatible with MOTOTRBO batteries and radios
- Automatic optimization of charge cycles
- Compact and rugged design for professional use
- LED charging status indicators
- Ideal for workstations or individual use
Pole adapter for Pelco/Videotec brackets
This pole adapter is the ideal solution for mounting Pelco and Videotec brackets, ensuring stable and long-lasting installations. Made of aluminum with an epoxy-polyester powder finish, it guarantees mechanical resistance and protection from the elements. Internal cable management promotes a tidy and secure installation, reducing the exposure of connections.
Compatible with poles with diameters between 65 and 140 mm, it supports up to 30 kg of load and is designed for professional installations of cameras and accessories. Weighing just 0.9 kg and with compact packaging dimensions, it is easy to transport and assemble.
Key Features- Compatible with Pelco and Videotec brackets
- Internal cable management for tidy installations
- Aluminum frame with epoxy-polyester coating
- Maximum load capacity: 30 kg
- Fits poles with diameters of 65-140 mm
- Unit weight: 0.9 kg
- Package dimensions: 10 x 16 x 23 cm, weight 1 kg
Wi-Fi 7 X7-35X tri-band 2x2 access point
The Cambium X7-35X 2x2 tri-band Wi-Fi 7 access point is designed for high performance and reliability in indoor business, education, and hospitality networks. Based on the new 802.11be standard, it integrates three radios (2.4 GHz, 5 GHz, and 6 GHz, each 2x2) for an aggregate speed of up to 9.2 Gbps. The integrated omnidirectional antennas offer up to 6 dBi gain with a maximum transmit power of 25 dBm and EIRP up to 31 dBm.
In addition to Wi-Fi connectivity, the device includes a BLE/Zigbee/Thread/Matter IoT radio for smart building applications. It supports up to 768 clients and 48 SSIDs, with fast roaming, dynamic channel and power management, band steering, and multi-band mesh capabilities. Installation is simplified by the universal mounting system compatible with junction boxes, suspended ceilings or walls. Centralized management is provided via cnMaestro„¢, enabling advanced monitoring, integrated security, and consistent policies.
Key Features- 2x2 tri-band Wi-Fi 7 (802.11be) standard
- Radios: 2.4 GHz 2x2, 5 GHz 2x2, 6 GHz 2x2
- Up to 9.2 Gbps aggregate throughput
- Integrated omnidirectional antennas (5 dBi at 2.4 GHz; 6 dBi at 5/6 GHz)
- 100/1000/2.5G Ethernet PoE (802.3at) port, maximum power consumption 25.5 W
- Integrated IoT radio: BLE 5.1, Zigbee, Thread, Matter
- Support up to 768 clients (256 per radio) and 48 SSIDs (16 per radio)
- Advanced features: 802.11r roaming, band steering, RF management, rate limiting
- Multi-band wireless mesh with auto-discovery and self-healing
- Security: WPA3, 802.1X/EAP, L2-L7 firewall, rogue AP detection
- Management via cnMaestro cloud or on-premises, CLI, HTTPS/SSH
- Dimensions 209.6 - 209.6 - 45 mm; weight 935 g
- Operating temperature 0 °C - +50 °C; humidity up to 95% non-condensing
- MTBF 829,316 hours at +25 °C
- Certifications: FCC, IC, CE, UL 2043 Plenum, RoHS, REACH
Wall mounting bracket for SELEA cameras
The SELEA wall mounting bracket is an accessory designed for the safe and precise installation of Targa series ANPR-OCR cameras. It allows for solid mounting on vertical surfaces, ensuring stability even in difficult environmental conditions. The accessory is ideal for applications in urban contexts, access control gates, car parks and industrial areas where clean and functional device integration is required.
Main features- Wall mounting bracket for SELEA Targa series cameras
- Robust mounting on a vertical surface
- Compatible with ANPR-OCR license plate reading devices
- Clean design and tidy installation
- Suitable for urban installations and access control
Inverter for license plate scanner power supply
The SELEA inverter is designed to provide reliable power to mobile devices such as license plate scanners, routers, and notebooks, in contexts where a fixed electrical network is not available. Designed for installation on vehicles or in mobile stations, it guarantees a continuous and protected supply of electricity. It is an ideal solution for dynamic applications in urban security, access control, and patrolling.
Main features- Stable power supply for mobile devices on the go
- Compatible with license plate scanners, routers, and notebooks
- Ideal for installation on vehicles or in temporary stations
- Portable solution for field operations
- Easy integration into SELEA mobile systems
AVPM 10/2.5 PM sensor
The AVPM 10/2.5 sensor is an air quality monitoring solution designed to be connected to Selea license plate reading cameras. The device measures PM 2.5 and PM 10 particulate matter, particles smaller than or equal to 2.5 microns and 10 microns, respectively, which are key parameters for environmental monitoring.
Thanks to the principle of laser light scattering and specific algorithms, the sensor is able to determine the concentration per unit volume and the diameter of the detected particles. Communication occurs via an RS485 serial port, allowing particulate matter data to be included in the metadata transmitted by the camera and subsequently stored in the CPS software.Main Features
- PM 2.5 and PM 10 measurement
- Laser light scattering measurement principle
- Measurement range: 0 to 1000 µg/m3
- Reading accuracy: plus or minus 0.1 µg/m3
- Response speed: less than or equal to 9 seconds
- Warm-up time: less than or equal to 2 minutes
- RS485 serial communication protocol, 8-bit data length
- Operating temperature: -20°C to +60°C at 0% RH - 80% RH
- Power supply voltage: 10 to 30 Vdc
- Dimensions: 116 x 44 x 135 mm
120W Ultra Slim DIN Rail Power Supply
The MEAN WELL XDR-120E series is a 120W industrial DIN-rail AC/DC power supply designed for compact installations and professional applications requiring reliability and ease of integration. The ultra-slim 30mm wide form factor optimizes electrical panel space, while the 85-264Vac input makes it suitable for global deployment.
This power supply offers up to 91% efficiency, low no-load consumption from 0.6W to 1W, a fanless design with natural convection cooling, and a wide operating temperature range of -40 to +70°C. The XDR-120E series also integrates a DC OK relay contact, a constant current limit circuit, and short-circuit, overload, overvoltage, and overtemperature protections.
It is suitable for industrial control systems, semiconductor manufacturing equipment, factory automation, electromechanical equipment, and battery chargers. It supports installation on TS35/7.5 or TS35/15 DIN rail and is covered by a 3-year warranty.
Main features
- 120 W industrial AC/DC power supply for DIN rail.
- XDR-120E series with slim 30 mm width.
- AC input 85-264 Vac and DC input 120-370 Vdc.
- Efficiency up to 91%.
- No-load consumption from 0.6 W to 1 W.
- Fanless design with natural air cooling.
- Operating temperature from -40 to +70 °C.
- Integrated DC OK relay contact.
- Protection against short circuit, overload, overvoltage and overtemperature.
- DIN rail installation TS35/7.5 or TS35/15.
- Industrial control, factory automation, and battery charger applications.
- 3-year warranty.
XDR 480E 24V 480W DIN Rail Power Supply
The XDR 480E is an ultra-slim, cost-effective industrial AC/DC power supply for DIN rail, designed for applications such as industrial control systems, semiconductor fabrication equipment, factory automation, electromechanical equipment, and battery chargers. With this 24 V model, MEAN WELL offers a 480 W solution with a compact 48 mm wide structure, suitable for installation on TS-35/7.5 or 15 DIN rails.
The power supply supports an AC input of 85 to 264 Vac and DC of 120 to 370 Vdc, with a frequency of 47-63 Hz and a typical efficiency of 95.5%. It integrates constant current limitation, a DC OK relay contact, protections against short circuit, overload, overvoltage, and overtemperature, as well as the current sharing function up to 1920 W in a 3+1 configuration for parallel use. The fanless design with natural convection cooling supports an operating temperature range of -40 to +70 °C.
Main Features
- Ultra-slim industrial AC/DC power supply for DIN rail.
- 24 V output with a nominal power of 480 W and a nominal current of 20 A.
- 48 mm width to optimize installation space.
- AC input 85-264 Vac and DC input 120-370 Vdc.
- Input frequency 47-63 Hz.
- Typical efficiency of 95.5%.
- Typical no-load consumption of 1.2 W at 115 Vac and 230 Vac.
- Integrated constant current limiting.
- DC OK relay contact Integrated.
- Parallelization up to 1920 W max in 3+1 configuration.
- Protection against short circuit, overload, overvoltage and overtemperature.
- Fanless design with natural convection cooling.
- Operating temperature from -40 to +70 °C.
- Installation on DIN rail TS-35/7.5 or 15.
- 3-year warranty.