AikomGo September Promo: free shipping

The Motorola Solutions DP2600e replacement keypad insert is a limited-edition front keypad. It belongs to the spare parts category and is also compatible with the DP2600 model.

Main Features

• Replacement front keypad insert
• Limited keypad version
• Compatible with the DP2600e portable radio
• Compatible with the DP2600 portable radio
• Spare parts category

The Amphenol-Procom 120° 11 dBi 380-470 MHz panel antenna is designed for TETRA and UHF trunked radio applications, offering stable performance across a wide bandwidth. Its compact size, combined with its low weight and corrosion-resistant marine aluminum construction, helps reduce wind and structural loads in professional installations.

This antenna operates in the 380-470 MHz range with vertical polarization and 11 dBi gain. The UV-resistant white ASA radome and DC-grounded metal parts complete a construction designed for outdoor use.

Main Features

• Operating frequency 380 to 470 MHz
• Vertical polarization
• Gain 11 dBi
• 3 dB E-plane spread of 18° plus or minus 1°
• 3 dB H-plane spread of 115° plus or minus 5°
• Maximum input power 400 W
• PIP 25 kW
• Impedance 50 Ohm
• VSWR less than 1.5:1
• Front-to-back ratio greater than 18 dB
• Antistatic protection with metal parts DC-grounded
• Materials: UV-resistant white ASA radome and 5083 marine aluminum housing
• Dimensions: 1840 x 300 x 216 mm
• Weight: approximately 12.5 kg
• Wind load: 445 N at 160 km/h
• Operating temperature: -40 °C to +75 °C
• Wind survivability: 270 km/h
• Protection rating: IP56

The Amphenol-Procom 10 dBi UHF 380-470 MHz panel antenna is designed for TETRA and UHF trunked radio applications and offers stable performance with PIM specifications over a wide bandwidth. The main body is made of corrosion-resistant 5083 marine-grade aluminum, while the white ASA radome is UV-resistant for reliable outdoor use.

The compact design helps keep the load on the mast low thanks to low wind resistance and a weight of approximately 8 kg. The antenna operates in the 380-470 MHz band with vertical polarization, 10 dBi gain, 50 Ohm impedance and a front-to-back ratio greater than 20 dB.

Main Features

• Frequency 380-470 MHz
• Gain 7.9 dBd equal to 10 dBi
• Vertical polarization
• 3 dB aperture in the E plane of 35° plus or minus 2°
• 3 dB aperture in the H plane of 90° plus or minus 5°
• Maximum input power 200 W
• VSWR less than 1.5:1
• Passive intermodulation of -153 dBc of third order with 2 x Tx at 43 dBm
• 7/16 DIN female connector, also available with N female or 4.3-10 female
• Dimensions 920 x 400 x 170 mm
• Wind load 297 N at 160 km/h
• Wind survival speed 300 km/h
• Operating temperature -40 °C to +75 °C
• Protection degree IP56

The Amphenol-Procom 120° 8 dBi 380-470 MHz panel antenna is designed for TETRA and UHF Trunked Radio applications, offering stable performance over a wide bandwidth. The compact design and low weight help reduce wind and structural loads, while the corrosion-resistant marine aluminum construction makes it suitable for outdoor installations.

It operates in the 380-470 MHz band with a gain of 8 dBi, 45° polarization and a beam width of 38° in the E plane and 115° in the H plane. The version with code 766.12.08.00-N features a non-PIM specified N female termination, with an IP56 protection rating and an operating temperature of -40 °C to +75 °C.

Main Features

• Operating Frequency 380-470 MHz
• Gain 8 dBi
• Polarization 45°
• Beam Width 3 dB 38° E plane and 115° H plane
• Maximum Input Power 2 x 200 W
• Impedance 50 Ohm
• VSWR less than 1.5:1
• Port-to-port isolation greater than or equal to 27 dB
• Front-to-back ratio greater than 20 dB
• Passive intermodulation -153 dBc
• N female termination not PIM specified
• Marine Grade 5083 aluminum alloy construction
• UV-resistant white ASA radome
• Dimensions 920 x 300 x 216 mm
• Weight approximately 6.5 kg
• IP56 protection
• Operating temperature -40 °C to +75 °C
• Wind survivability speed 300 km/h

The Amphenol-Procom XPOL panel antenna (model 766.65.12.00) is optimized for TETRA and UHF Trunked Radio applications, ensuring stable performance over a wide band. It features ±45° cross-polarization, ‰¥27dB inter-port isolation, and low passive intermodulation (-153dBc), ensuring a clean signal even in challenging RF environments. Constructed of marine-grade aluminum with a UV-resistant ASA radome, it is lightweight and wind-resistant, with an IP56 rating for outdoor use.

• Cross Polarization ±45°, Gain 12dBi
• 3dB Aperture: 38° (E-Plane), 68° (H-Plane)
• Impedance 50?, VSWR <1.5:1, front-to-back >23dB
• Inter-Port Isolation ‰¥27dB, PIM -153dBc
• Maximum Power 2 x200W, PIP 25kW
• Connectors 2 x7/16DIN(f) (N(f) or 4.3 10(f) available)
• 5083 aluminum body, ASA UV radome, white color
• Dimensions 920x400x170mm, weight approx. 7kg
• Wind resistance 297N @160km/h, withstands up to 300km/h
• IP56 protection grade, operating temperature from 40°C to +75°C

The 766.65.15.00 panel antenna from Amphenol-Procom is a high-performance solution for TETRA networks and UHF Trunked Radio systems. Featuring ±45° cross-polarization, 15dBi gain, and high-gain isolation (‰¥27dB), it ensures reliable transmissions even in complex RF environments. The rugged marine aluminum design with ASA UV radome allows continuous use in harsh outdoor environments while maintaining low wind loading and low passive intermodulation (PIM -153dBc).

• Cross Polarization ±45°, Gain 15dBi
• Aperture 17° (E-Plane), 68° (H-Plane)
• Impedance 50 ohm, VSWR < 1.5:1
• Inter-Port Isolation ‰¥ 27 dB, PIM -153 dBc
• Front-to-back > 23 dB
• Maximum Power 2 x 400 W, PIP 25 kW
• Connector 7/16 DIN(f); N(f) and 4.3-10(f) options
• 5083 aluminum construction and UV-resistant ASA radome
• Dimensions 1840x400x170 mm, weight approx. 12.5 kg
• Wind load 593 N at 160 km/h, resistance up to 270 km/h
• IP56 protection, operating temperature -40 °C to +75 °C

The Amphenol Procom XPOL 10dBi 380-470MHz antenna is a professional panel solution for UHF TETRA and trunked networks. It offers ±45° cross-polarization, two independent ports, and a high gain of 10dBi (7.9dBd), with excellent directivity in both polarizations.

Designed to transmit up to 200W per port, it ensures VSWR <1.5:1, port isolation ‰¥27dB, and low passive intermodulation (‰¤-153dBc). It is constructed of weatherproof materials (marine-grade aluminum and UV-white ASA radome) and is IP56 rated. Ideal for demanding outdoor environments, it resists winds up to 300km/h.

• Operating Frequency: 380-470MHz
• Gain: 10dBi (7.9dBd)
• Polarization: Crossed ±45°
• Number of Ports: 2
• Maximum Power Per Port: 200W
• VSWR: <1.5:1
• Isolation Between Ports: ‰¥27dB
• PIM: ‰¤-153dBc (3rd order, 2x43dBm)
• Impedance: 50?
• Connectors: 2x7/16 FEMM (N(f) or 4.3 10(f))
• Dimensions: 920x400x170mm
• Weight: ~7.5kg
• Materials: marine grade aluminum, UV white ASA radome
• Protection: IP56
• Operating temperature: -40°C à· +75°C
• Wind resistance: load 297N @ 160km/h, survival up to 300km/h

This XPOL 90° panel antenna is designed for professional applications in the 380-470MHz UHF band, ideal for TETRA networks and radio trunking. It offers high gain of 13dBi, ±45° polarization, and excellent port separation with isolation of ‰¥27dB. The rugged 5083 marine-grade aluminum construction with a UV-resistant white ASA radome ensures durability and protection in harsh outdoor environments.

With a 90° horizontal and 17° vertical beam angle, it maintains a good front-to-back ratio (>23dB) and a VSWR of <1.5:1. It features 7/16DIN female connectors, with options for N(f) or 4.3-10(f), and supports up to 2x400W. IP56 certified and resistant to winds up to 270km/h, it includes anti-static protection with grounding.

• Operating Frequency: 380-470MHz
• Gain: 13dBi (10.9dBd)
• Polarization: ±45° XPOL
• 3dB Aperture: E-Plane 17°±2°, H-Plane 90°±5°
• Port-to-Port Isolation ‰¥27dB, XPOL Discrimination 30dB
• Ratio front-to-back >23dB
• Maximum power: 2x400W
• VSWR: <1.5:1
• Connectors: 7/16DIN female (optional: N(f), 4.3-10(f))
• Materials: 5083 marine aluminum, UV-resistant white ASA radome
• Dimensions: 1840x400x170mm; weight: approx. 13kg
• Wind resistance: 160km/h (593N load); survivability up to 270km/h
• Protection grade: IP56; DC-grounded

The peiBOX central unit for peiECO system from Peicom is the control center for the peiECO system, developed to ensure reliable, fast, and secure data communication in modern building automation systems for retail environments. The integrated wireless module enables cable-free connectivity with the system's connected components, providing an effective foundation for a smart, connected, and efficient work environment.

The scope of delivery includes the central unit, radio module with custom programming based on the infrastructure, radio antenna, and power cable. Commissioning is described as quick and easy, but should only be performed by qualified personnel.

Main Features

• Central unit for peiECO system
• Reliable, fast and secure data communication
• Integrated wireless module for cable-free connectivity
• Wi-Fi 2.4 GHz 802.11 b/g/n
• Bluetooth
• Power supply 100 - 240 VAC
• Dimensions 360 x 254 x 111 mm
• Includes radio antenna and power cable
• Custom programming for the infrastructure included

The peiPRESS pushbutton top for peiECO systems is designed for applications requiring wireless connectivity over 2.4 GHz Wi-Fi in a compact form factor. With support for the 802.11 b/g/n standard, the Peicom solution is suitable for flexible installations and allows power management based on project needs.

The device offers an indicative battery life of approximately 60 to 90 days, calculated on a typical activity profile. Power must be ordered separately via a rechargeable battery or external USB power supply. A dedicated advertising flag can also be ordered separately.

Main features

• peiPRESS button top for peiECO system
• 2.4 GHz 802.11 b/g/n Wi-Fi connectivity
• Battery life of approximately 60-90 days with typical activity profile
• Power supply via rechargeable battery can be ordered separately
• Support for external power supply via USB can be ordered separately
• Advertising flag can be ordered separately
• Bottom stand for counter, wall, shelf or pedestal can be ordered separately
• Dimensions approximately 68 x 85 x 115 mm

The peiSUPPLY 4-contact unit for the peiECO system from Peicom is designed to easily and flexibly integrate individual switching contacts into an existing system. The device manages up to four external contacts, both dry and live, and is suitable for applications such as deposit machines, baking stations, or traditional doorbells, with wireless connection to the peiECO infrastructure.

The compact size and spring-loaded terminals make installation particularly convenient, even in limited spaces. Peicom designed this module for quick wiring and versatile use, with battery or external USB-C power supply operation. Reverse polarity protection and AC voltage compatibility contribute to greater ease of use.

Key Features

• Integration of up to 4 external contacts
• Wireless connection to peiECO infrastructure
• Management of dry or live contacts
• Compact design for flexible installations
• Spring-type terminals for quick and easy wiring
• Reverse polarity protection
• AC voltage compatible
• 3.5 - 5.5 V power supply via USB-C connector
• Maximum consumption of 200 mA
• WiFi 2.4 GHz 802.11 b/g/n
• Connection terminals up to 1.5 mm2
• Input voltage range 5 - 24 VDC
• Maximum input current approximately 5 mA
• Auxiliary voltage for 10 V inputs maximum 100 mA
• Dimensions approximately 70 x 70 x 56 mm