AikomGo September Promo: free shipping
Valid until 30 September 2026
Consult over 2,000 available products and purchase the most suitable solutions for your next projects, without transport costs.
The discount is automatically applied at checkout, without the need for promotional codes.
The promo is valid only for shipment to Italy.
MXP600 UHF 380-470 MHz whip antenna
The MXP600 UHF 380-470 MHz whip antenna is an original accessory compatible with the MXP600 portable TETRA radio. Made of ABS plastic and available in a black finish, it features a compact 12 cm whip structure designed for use in the UHF band from 380 to 470 MHz.
With this antenna, Motorola Solutions offers a component dedicated to MXP600 users who require declared compatibility with the device. The portable whip format and 120 mm height make it a consistent solution for use on portable radios.
Main Features- UHF band.
- Frequency range from 380 to 470 MHz.
- Portable whip antenna structure.
- ABS plastic material.
- Height of 120 mm.
- Black color.
- Compatible with MXP600.
- Original Motorola Solutions antenna.
18 GHz 0.6 m satellite dish
The Aviat Networks 18 GHz 0.6 m parabolic antenna is part of the ValuLine High Performance Low Profile range and is a single-polarized solution designed for applications in the 17.700-19.700 GHz band with Aviat WTM4100 and WTM4200 interfaces. The low-profile design with a one-piece reflector, white finish, and gray composite broadband radome allows for a compact and tidy installation while maintaining manufacturer-defined electrical performance.
With a nominal diameter of 0.6 m, this antenna offers a horizontal and vertical beamwidth of 2.1 degrees, 30 dB cross-polarization discrimination, a front-to-back ratio of 67 dB, and gain of up to 39.4 dBi in the top band. Mechanically, it supports poles from 50 mm to 120 mm, includes fine azimuth and elevation adjustment of plus or minus 15 degrees, and has a net weight of 8 kg.
The Aviat Networks solution is supplied in a compact pack with a flashless radome and is suitable for contexts where small dimensions, declared regulatory compliance, and resistance to environmental agents according to the reported specifications are required. The operating wind speed is 180 km/h, while the survival speed reaches 250 km/h.
Main Features
- VauLine High Performance Low Profile single-polarized antenna
- Operating band 17.700-19.700 GHz
- Nominal diameter 0.6 m
- Aviat WTM4100 and WTM4200 interface
- One-piece reflector
- Grey composite broadband radome without flash
- Antenna color white
- Horizontal and vertical beamwidth 2.1 degrees
- Gain 38.6 dBi low band, 39.0 dBi mid band, 39.4 dBi top band
- XPD 30 dB and front-to-back ratio 67 dB
- Return loss 17.7 dB and VSWR 1.30
- Fine adjustment of azimuth and elevation of plus or minus 15 degrees
- Mounting on 50 mm to 120 mm masts
- Net weight 8 kg
- Operating wind speed 180 km/h and survival 250 km/h
71-86 GHz 0.6 m satellite dish
The 71-86 GHz 0.6 m Parabolic Antenna is a low-profile, single-polarization microwave antenna suitable for applications in the 71.000 to 86.000 GHz band. Within the Aviat Networks portfolio, this 0.6 m nominal diameter model combines a compact profile, high gain, and ETSI 302 217 Class 3 and US FCC Part 101.115 electrical compliance.
The product offers 0.5 degrees of horizontal and vertical beamwidth, 30 dB of cross polarization discrimination, 69 dB of front-to-back ratio, and 14.0 dB of return loss. The claimed gain is 50.0 dBi in the low band, 50.8 dBi in the mid band and 51.5 dBi in the top band, with a maximum VSWR of 1.50.
Mechanically, Aviat Networks provides fine adjustment of azimuth and elevation of plus or minus 15 degrees, mounting on masts with diameters from 50 mm to 115 mm and a net weight of 8 kg. The antenna supports a wind velocity operational of 108 km/h and a wind velocity survival rating of 250 km/h.
Main Features
- Low profile single-polarized microwave antenna.
- Operating band from 71.000 to 86.000 GHz.
- Nominal diameter of 0.6 m.
- Gain up to 51.5 dBi.
- Horizontal and vertical beamwidth of 0.5 degrees.
- Cross Polarization Discrimination of 30 dB.
- Front-to-Back Ratio of 69 dB.
- Return Loss of 14.0 dB and VSWR of 1.50.
- Fine adjustment of azimuth and elevation of plus or minus 15 degrees.
- Mounting on a 50 mm to 115 mm pole.
- Net weight 8 kg.
- Complies with ETSI 302 217 Class 3 and US FCC Part 101.115.
- Wind resistance up to 250 km/h.
30° directional antenna 2.4/5 GHz outdoor
The Cambium ANT-D30-2X2-02 30° directional antenna is designed for outdoor applications requiring precise and reliable coverage. It supports the 2.3 2.7 GHz and 4.9 5.925 GHz bands, with gain up to 14 dBi. Dual slant polarization ensures improved performance in challenging environments. The rugged and compact design facilitates easy mounting with dedicated options, making it ideal for targeted connections in corporate or infrastructure networks.
Key Features- Type: 30° angle outdoor directional antenna
- Supported frequencies: 2.3 2.7 GHz and 4.9 5.925 GHz
- Maximum gain: 14 dBi
- Polarization: dual slant
- Connectors: 2 x N-type female
- Maximum power: 6 W
- Dimensions: 305 mm x 305 mm x 15 mm
- Operating temperature: -45 °C to 70 °C
Outdoor 4G/5G Wi-Fi GPS IP67 antenna
The Peplink MAX Antenna is designed for high performance in outdoor environments, combining cellular, Wi-Fi, and GPS antennas in a single, rugged enclosure. Its distinctive feature is the ability to install the router directly inside the enclosure, eliminating losses caused by long RF cables.
The UV-resistant plastic enclosure is IP67 rated, protecting against humidity, salt spray, and corrosion. The included L-mount and wall, pole, surface, and bridge mounting options make it easy to install on vehicles and mobile equipment.
Key Features- Compatibility with Peplink BR1 Mini, BR1 Pro 5G, Transit Duo Pro routers, and more
- 4 LTE/5G, 2 Wi-Fi, 1 GPS
- Supported frequencies: 600-6000 MHz
- Maximum gain: up to 7.4 dBi
- Connectors: SMA male (Cellular, GPS), RP-SMA male (Wi-Fi)
- UV-resistant polycarbonate housing, IP67
- GPS power: 3.3V, 10mA consumption
- Dimensions: 120 mm height, 250 mm diameter
- PoE compatible via splitter (not included)
- Easy mounting with L-mount, 3M adhesive and cable glands
5G Starlink MAX S outdoor antenna
Peplink's MAX S antenna combines 5G connectivity, Wi-Fi, and GPS in a single enclosure that accommodates a Peplink and Starlink Mini router without external RF cabling, reducing losses and maximizing signal quality. The structure is made with an aluminum base and a weather-resistant PC casing, ideal for outdoor installations in the most demanding scenarios.
The design includes space for DC or PoE power modules and a flexible mounting system suitable for surfaces, poles, magnetic mounts, or vehicle roofs. Integrated RF features deliver high performance in all supported bands, ensuring reliable use in professional, mobile, or remote environments. Key Features
- 4 5G/LTE elements with gains of 5.7 dBi from 617 to 960 MHz, 6.8 dBi from 1410 to 2700 MHz, 8.9 dBi from 3300 to 4400 MHz, and 7.3 dBi from 5000 to 6000 MHz.
- 2 Wi-Fi elements with gains of 6.3 dBi from 2400 to 2500 MHz and 7.4 dBi from 5000 to 6000 MHz.
- GPS antenna with peak gain of 0.9 dBi at 1575 MHz and 0.8 dBi at 1602 MHz with 27 dB LNA.
- Right-angle SMA male connectors for 5G and GPS and RP-SMA male for Wi-Fi.
- IP67 protection with UV and salt spray resistant materials, heat-sink metal base.
- Compatible with BR1 Mini, Transit Duo Pro, and BR1 Pro.
- Surface, pole, magnetic mount, or vehicle roof mount.
- Dimensions: 448 mm long, 368 mm wide, 135 mm high.
- Includes screws, gaskets, RJ45 gland, and accessories according to the technical list.
142-160MHz on glass antenna
The Panorama Antennas AOG151-5 On-Glass Antenna is designed for VHF vehicle applications, with direct mounting to the glass via capacitive coupling, without the need for drilling. It operates in the 142-160MHz band with an estimated gain of approximately 2dBi and a typical VSWR of 1.5:1, offering performance comparable to a traditional 1/4 wave.
It is ideal for fleets and service vehicles requiring temporary or easily removable solutions. The integrated 5m cable allows for quick and flexible connection, maintaining the vehicle's aesthetics and ensuring protection of the original glass.
Main Features- Operating Frequency: 142-160MHz
- Gain: approximately 2dBi
- Typical VSWR: 1.5:1
- Mounting: Internal glass via capacitive coupling
- Cable: 5m, class CS23
- Color: Black
Wall adapter for Avigilon APD sensor
The Avigilon APD sensor wall adapter is designed to allow the Presence Detector to be installed vertically, providing a stable and discreet solution for indoor environments such as bank tellers, pharmacies, retail stores, healthcare facilities, and other sensitive areas. The mount holds the sensor in place to ensure accurate presence detection using pulse radar technology.
The housing, made of high-strength plastic, is designed to complement the compact design of the APD sensor. The wall-mounted mount measures 91 x 60 x 75 mm and weighs 154 g, allowing for simple and secure installation. The device is designed for indoor use only and meets the quality standards required for professional installations.
Main Features- Dedicated wall mount for Avigilon Presence Detector APD.
- Made of high-strength plastic, gray color.
- Dimensions 91 x 60 x 75 mm; weight 154 g.
- Designed for indoor use only.
- Allows the correct positioning angle for UWB radar detection.
Cloud Connector Alta A1100 24 TB single Gigabit
The Alta A1100 24 TB Cloud Connector is a desktop system designed for distributed installations or remote sites requiring high performance and cloud integration. Part of the Avigilon Alta Video ecosystem, it allows you to connect third-party cameras while maintaining your existing infrastructure and leveraging a single management platform.
The 24 TB local storage and graphics processing via NVIDIA Quadro RTX GPUs enable advanced video analytics, intelligent search, and proactive notifications. Resiliency and failover features improve business continuity, while disk encryption and the Trusted Platform Module help reduce cyber risks and protect sensitive data. Key Features
- Support for up to 75 cameras
- 24 TB net local storage with operating system on SSD
- 4 SATA drives for video recording
- Nvidia Quadro RTX GPU for advanced video analytics
- Single 10 Gb Base-T and single 1 Gb Base-T network interfaces
- Avigilon Alta hardened OS
- Built-in disk encryption and Trusted Platform Module
- Standard support and 5-year warranty included
Cloud Connector Alta A1100 48 TB
The Alta A1100 48 TB Cloud Connector is a workstation appliance from the Avigilon Alta range, suitable for distributed installations or remote sites in small to medium-sized contexts. It supports up to 75 camera sources and provides 48 TB of net storage, to manage video infrastructures with high capacity needs.
In the Avigilon portfolio, this configuration corresponds to the A1100 model with 4 hard drives, 10Gb Base-T and 1Gb Base-T network connectivity and NVIDIA ADA 2000 GPU. It also includes Alta Aware VMS, standard support, a 5-year warranty and power cables included.
The platform integrates an Intel Xeon W3-2423 processor, 32 GB of DDR5 4800 MHz RDIMM ECC RAM, a 256 GB M.2 PCIe NVMe Class 35 system drive and the Avigilon Alta Linux-based hardened OS. For storage resilience, Avigilon Alta's adaptive block-level erasure coding is available, with single-disk failure tolerance.
The A1100 model does not support local display. You can also create server groups with multiple Cloud Connectors to reduce downtime and help prevent data loss if a device goes offline.
Key Features
- Workstation appliance for distributed deployments or small to medium-sized remote sites.
- Support for up to 75 camera sources.
- Storage up to 64 TB raw and 48 TB net.
- 4 Surveillance-grade SATA hard drives.
- 10Gb Base-T and 1Gb Base-T network connectivity.
- Intel Xeon W3-2423 processor.
- Nvidia RTX A2000 and Nvidia ADA 2000 GPUs listed in the documentation.
- 32 GB DDR5 4800 MHz RDIMM ECC RAM.
- M.2 system SSD 256 GB PCIe NVMe Class 35.
- Avigilon Alta Linux-based hardened OS.
- Alta Aware VMS included.
- Adaptive block-level erasure coding with single-disk fault tolerance.
- Standard support, 5-year warranty, and power cables included.
- Local display not available on the A1100 model.
Cloud Connector A200 4TB Workstation
The A200 4TB Cloud Connector Workstation is a compact solution designed for distributed environments or small installations that require direct integration with the Avigilon Alta Video platform. It allows you to connect and manage up to 10 cameras, including third-party cameras, offering a transition to the cloud without the need to replace existing hardware.
Featuring an Intel Core i3-12100 processor and NVIDIA RTX A400 GPU, the workstation delivers high performance for real-time video analytics, anomaly detection, proactive notifications, and intelligent search. The unit includes 4TB of surveillance-grade storage and a 256GB NVMe SSD for the operating system, with Avigilon Alta Hardened OS pre-installed. The Trusted Platform Module (TPM) and built-in disk encryption ensure high standards of cybersecurity.
The A200 supports features such as local viewing, resilience through failover groups, and centralized management via browser or mobile app. Compatible with Avigilon Alta AI analytics, it allows you to apply detection rules based on motion, objects, license plates, or specific sounds (such as broken glass or alarms). Its compact design and low power consumption make it easy to install in remote sites or small installations. It is backed by a 5-year warranty with on-site technical support.
Key Features- Support up to 10 IP cameras
- Intel Core i3-12100 processor and Nvidia RTX A400 GPU
- 4 TB video storage with surveillance-class HDD
- 256 GB NVMe SSD for the OS
- AI analytics: people, vehicle, sound and license plate detection
- Resiliency and failover via Cloud Connector groups
- Local viewing and remote management via browser or app
- Advanced security with Trusted Platform Module and disk encryption
- Power supply 90-264 V AC, maximum consumption 110 W
- Dimensions 290 x 92 x 293 mm, weight 5.6 kg
- Lifetime warranty 5 years with dedicated technical support
Cloud Connector Alta A200 8 TB dual Gigabit
The Avigilon Alta A200 Cloud Connector is a compact appliance designed for smaller installations or remote sites, offering centralized management and the ability to connect third-party devices to Avigilon Alta Video. With 8 TB of storage and dual Gigabit interfaces, it provides stable connectivity and management capabilities for up to 10 cameras. Alta intelligent analytics enable real-time detection, proactive notifications, and advanced searches to improve security. Key Features
- Support for up to 10 cameras
- Storage up to 8 TB raw
- Dual 1 Gb Base-T interface
- Intel Core i3 12100 processor
- Nvidia RTX A400 GPU
- 16 GB DDR4 RAM
- 256 GB PCIe NVMe M.2 SSD
- Local display for low-bandwidth views
- Avigilon Alta Linux-based hardened OS
- Dimensions: 290 mm high, 92.60 mm wide, 292.80 mm depth
- 5-year warranty with Avigilon Alta support