AikomGo April Promo: free shipping

The Ava 5MP 3.2mm IR Compact Dome Camera (model COMPACTDOME-B-5MP-30) is a compact and elegant solution for indoor environments. Featuring a 5MP (4:3) sensor mounted on a 1/2.7-inch chip and a 3.2mm fixed lens with an Æ’/1.3 aperture, it is able to capture clear images even in low-light conditions thanks to integrated IR illumination up to 10m.

The camera integrates AI video and audio analytics, a microphone, microSD card storage with support for up to 120 days and cloud management via Avigilon Alta Aware. Includes pre-installed certificates on the Trusted Platform Module (TPM 2.0) for maximum security and end-to-end encrypted communication. It is NDAA compliant and has no default password, ensuring high protection.

• Resolution: 5MP (4:3), 1/2.7³ sensor
• Fixed lens: 3.2mm, Æ’/1.3 aperture
• IR night vision up to 10m (850nm)
• Field of view: 102° horizontal, 71° vertical
• Frame rate: 2688-1944 @ 30fps
• HDR multi-exposure
• Video compression: H.264, H.265, Motion JPEG
• Built-in AI audio/video analytics with microphone
• Security grade: TPM 2.0, authenticated access, HTTPS/TLS
• Protocols Supported: IPv4, RTSP, RTP, DHCP, ONVIF Profiles
• Power supply PoE 802.3af (5W typical, 8W max)
• Dimensions: 107-107-64mm; weight: 280g
• Installation: plug-and-play, wall/ceiling compatible, template and brackets included
• Operating temperature: 0°C à· +40°C

The Ava 5MP compact dome camera is ideal for indoor environments where high video quality is required in a small package. With Full HD resolution and a wide-angle lens, it ensures wide and detailed coverage. The built-in microphone and speaker support two-way audio communication for active surveillance. AI video analytics capabilities enable event recognition, anomaly detection, and intelligent alarm management. The elegant and discreet design fits perfectly into any environment.

• 5MP resolution for clear and detailed images
• Wide-angle lens for a wide field of view
• Built-in audio with microphone and speaker
• AI video analytics for event and anomaly detection
• Compact and modern design for discreet installation
• Compatible with Ava security systems for centralized management

The Corner Mount for Dome and Bullet Cameras (part number CRNMT-1001) is made of aluminum with a powder coat finish close to Pantone 427C. Designed for external corner installations, it allows the attachment of dome or bullet cameras in combination with standard pendant brackets.

• Part number: CRNMT-1001
• Painted aluminum corner mount
• Compatible with dome and bullet pendant brackets
• Includes female inserts and metal clamps (6³"20³)
• Suitable for pole diameters min. à˜152mm " max. à˜508mm
• Weight: approximately 1.24kg
• Mounting on external corners, fixing hardware included

The Calipsa Basic license allows you to enable cloud video analytics features on 10 channels for one year, improving the efficiency of video surveillance systems. The technology reduces false alarms by filtering out irrelevant activations and accurately identifying human and vehicular movements.

The platform integrates tools such as masking areas of low interest, customizable time scheduling, and site sharing for collaborative management. The dedicated mobile app allows you to receive push notifications, access the history, remotely manage arm/disarm functions, and obtain snapshots and periodic reports via email.

• Annual Calipsa Basic license for 10 channels
• Reduction of false alarms with cloud video analytics
• Human and vehicle movement recognition
• Masking of non-relevant areas
• Customizable scheduling per site
• Mobile app with notifications, history, and remote arm/disarm
• Automatic reports and snapshots via email
• Collaborative management via site sharing

Pelco's Calipsa Pro license enables advanced video analytics features on 10 channels for one year. Thanks to deep learning, it recognizes and classifies people and vehicles in real time, filtering out false alarms and optimizing security resource management.

It integrates automatic checks on the operational status of cameras, ensuring reliability and reducing downtime. The cloud platform allows remote access, centralized management, and immediate notifications, improving operational efficiency in any context. Compatible with major VMS systems, it is ideal for professional video surveillance applications.Main Features

• Annual cloud license for 10 channels
• Real-time recognition of people and vehicles
• Reduction of false alarms with AI and deep learning
• Automatic camera status check
• Centralized management and quick notifications
• Compatibility with major VMS systems
• Cloud architecture for remote access and scalability

The Amphenol-Procom CXL108-185C antenna is a rugged omnidirectional solution for stationary and marine applications on 108-185MHz. The radiator is fully protected by a polyurethane-coated fiberglass tube, ensuring long-lasting durability in environments exposed to the elements.

Designed for mounting on pipes with diameters ranging from 27 to 65mm, it allows for cable routing externally or internally to the support tube. All metal parts are DC grounded, ensuring protection from lightning strikes. The antenna offers 0dBi gain, VSWR <2.5:1 and 75MHz bandwidth, up to 40W input power, ideal for critical stations requiring ruggedness and reliability.

• Operating Frequency: 108-185MHz
• Gain: 0dBi
• Polarization: Vertical, omnidirectional colinear
• Maximum Power: 40W
• VSWR: <2.5:1
• Impedance: 50?
• Mounting: Ø27-65mm tube
• Antistatic Protection: All metal parts DC grounded
• Construction: Polyurethane fiberglass radome, aluminum bracket
• Materials: Fiberglass, Seawater-resistant aluminum
• Bandwidth: 75MHz
• Wind area: 0.062m²; wind load: 73N at 160km/h
• Height: approx. 1640mm; weight: approx. 3.5kg
• Protection: IP56; operating temperature -30°C à· +70°C
• Wind resistance: survival up to 200km/h

The Amphenol Procom CXL 150-1LW-SS-Ex/h antenna is designed for applications in Zone 2 classified environments, compliant with ATEX standards for gas groups IIA, IIB and IIC. It operates in the 155-175 MHz band, with vertical polarization and omnidirectional radiation, offering a gain of 0 dBd (2.2 dBi) and a VSWR of less than 1.5:1.

The construction features a 1/2 end-fed radiator enclosed in a polyurethane-coated fiberglass tube, with an AISI 316L stainless steel LW bracket and stainless steel hardware. The antenna is fully DC grounded, IP66 protected and wind resistant up to 200 km/h, suitable for installation on pipes from 16 to 54 mm.

• Operating frequency: 155-175 MHz
• Gain: 0 dBd (2.2 dBi)
• Bandwidth: 18-21 MHz
• VSWR: < 1.5:1
• Impedance: 50 ohm
• Polarization: vertical
• Radiation: omnidirectional
• ATEX certification: Zone 2, Ex nA IIC T6
• Connection: N female (torque 0.7-1.1 Nm)
• Materials: fiberglass, AISI stainless steel 316L
• Antistatic protection: DC ground connection
• Protection degree: IP66
• Mounting: on pipe Ø 16-54 mm
• Height: 1300 mm
• Diameter: top 17 mm, base 23.6 mm
• Weight: approx. 1.25 kg
• Wind resistance: 32 N @ 160 km/h; survival up to 200 km/h
• Operating temperature: -30 °C à· +60 °C

The Amphenol-Procom CXL2-1LW/h antenna is a universal professional solution, suitable for both maritime installations and VHF base stations (160MHz band), covering 155-175MHz. The 1/2 end-fed radiator is enclosed in a polyurethane-coated conical fiberglass sheath, ensuring high mechanical resistance and low wind exposure.

It supports up to 150W of power, with zero gain (0dBd / 2.2dBi) and omnidirectional radiation characteristics. Mountable on Ø16-54mm pipes using a corrosion-resistant aluminum LW bracket and stainless steel bolts. The antenna is DC grounded to reduce lightning strikes and has an IP66 rating.

• Operating Frequency: 155-175MHz
• Gain: 0dBd (2.2dBi)
• Polarization: Vertical, Omnidirectional
• Type: 1/2 Coaxial Dipole
• VSWR: ‰¤1.5:1 (155-175MHz) and ‰¤1.75:1 (155-175MHz extremes)
• Impedance: 50?
• Maximum Power: 150W CW
• Connection: N(f)
• Materials: Polyurethane fiberglass, aluminum bracket, stainless steel hardware
• Mounting: Ø16-54mm tube
• Antistatic protection: DC ground connection
• Dimensions: height ~1300mm, diameter 8mm†’16mm
• Weight: approx. 0.76kg
• Protection: IP66
• Operating temperature: -30°C à· +70°C
• Wind load: 22N @ 160km/h; survival up to 200km/h
• Beamwidth E-plane: 80°; H-plane: omnidirectional

The CXL 3-1LW is a unity-gain omnidirectional base antenna designed for the 118-137 MHz civil aeronautical band. With vertical polarization and 0 dBd (2.2 dBi) gain, it ensures uniform signal coverage and is ideal for professional installations.

The Amphenol Procom antenna uses a 1/2 wavelength wideband coaxial dipole design, with 50 Ohm impedance, 150 W maximum input power, a VSWR of less than 1.75:1, and a bandwidth of 19 MHz. The E-plane beamwidth at 3 dB is 66°, while the H-plane pattern is omnidirectional. All metal parts are DC grounded to reduce interference from lightning.

The structure is made of a polyurethane-coated fiberglass radome and a seawater-resistant, epoxy-coated aluminum mounting bracket. It can be mounted on a pole with a diameter of 27 - 65 mm. Standing approximately 1500 mm tall and weighing approximately 0.80 kg, it is designed to withstand harsh environmental conditions, with IP66 protection, an operating temperature range of -40°C to +70°C, and wind resistance tested up to 200 km/h.Main Features

• Frequency: 118 - 137 MHz
• Antenna Type: Wideband Coaxial Dipole
• Gain: 0 dBd (2.2 dBi)
• Polarization: Vertical
• Pattern: Omnidirectional
• 3 dB Beamwidth E-Plane: 66°
• Maximum Power: 150 W
• Impedance: 50 Ohm
• VSWR: < 1.75:1
• Bandwidth: 19 MHz
• Connector: N(I)
• Height: approx. 1500 mm
• Weight: approx. 0.80 kg
• Mounting on a 27 - 65 mm diameter pole
• Operating temperature: -40 °C to +70 °C
• Wind resistance: up to 200 km/h
• Protection: IP66

The Amphenol-Procom CXL450 1LW SS Ex/h is a zero-gain (0dBd) ATEX colinear omnidirectional antenna designed to operate in the 420-470MHz band with high reliability and safety. The brass radiator is housed in a robust coated fiberglass tube, while the AISI316L stainless steel bracket and bolts ensure stable mounting on Ø16-54mm pipes.

Suitable for use in Zone 2 with IIA-IIB-IIC gases, the antenna requires full DC earthing on all metal parts. The IP66 rating and resistance to wind speeds up to 200 km/h (guaranteed survival) make it suitable for outdoor installations in critical industrial environments.

• Operating Frequency: 420-470MHz
• Gain: 0dBd (approx. 2.2dBi)
• Polarization: vertical; type: colinear omnidirectional
• VSWR: ‰¤1.5:1
• Impedance: 50?
• Maximum power: compliant with ATEX limits (IIA-IIC)
• Connection: N female, torque 0.7-1.1Nm
• Materials: brass radiator, fiberglass radome, stainless steel bracket and U-bolt
• Mounting: Ø16-54mm tube
• Dimensions: length ~1050mm, upper diameter 17mm, lower 23.6mm
• Weight: ~1.45kg
• Protection: IP66; operating temperature -30°C à· +60°C
• Wind resistance: load ~33N at 160km/h; Survivability up to 200km/h
• Anti-static protection: all DC-connected metal parts
• ATEX certification: II 3G ExnAIICT6

The Amphenol Procom CXL70-1LW/h antenna is a robust and elegant solution for mobile and marine applications, covering the UHF band 420-470MHz with unity gain (0dBd). The brass radiator is enclosed in a painted fiberglass conical radome, while the aluminum LW bracket and stainless steel hardware ensure stable mounting on Ø16-54mm pipes.

It does not require a ground base or radials thanks to the 1/2 design and direct connection to ground. It supports up to 200W of power, with a VSWR <1.5:1 and a bandwidth of approximately 50MHz. The body is IP66 certified and withstands winds of up to 200km/h, making it well suited to extreme conditions. All metal parts are connected to DC ground to reduce lightning disturbances.

• Operating frequency: 420-470MHz
• Gain: 0dBd (2.2dBi)
• Polarization: vertical, colinear omnidirectional type
• VSWR: ‰¤1.5:1
• Impedance: 50?
• Maximum power: 200W
• Connection: N female
• Mounting: LW bracket and stainless steel bolts for Ø16-54mm tube
• Materials: polyurethane fiberglass radome, painted aluminum bracket, stainless steel bolts
• Dimensions: height approx. 680mm, diameter 12mm†’16mm
• Weight: about 0.65kg
• Protection: IP66; temperature -35°C à· +70°C
• Wind resistance: 24N at 160km/h; survival up to 200km/h
• DC grounding: yes, to reduce discharge noise