AikomGo September Promo: free shipping

The Amphenol Procom BPF2/6 1.5N(f) filter is designed for professional RF applications in the 160MHz VHF band. It uses four aperture-coupled helical cavities to achieve high selectivity in a compact, rugged housing.

The 1.5MHz bandwidth makes it suitable for use as a receiver input filter or as a transmitter output filter, with a maximum power of 35W. It offers insertion loss ‰¤2.5dB (1.6dB typical), VSWR <1.5:1, and an impedance of 50?. Extruded aluminum and steel construction with a vinyl finish ensures durability even in harsh environments.

• Operating Band: 144-175MHz
• Bandwidth: 1.5MHz
• Maximum Power: 35W
• Insertion Loss: ‰¤2.5dB (typical 1.6dB)
• VSWR: <1.5:1
• Impedance: 50?
• Connection: N female
• Dimensions: 165 x 154 x 33mm
• Weight: approx. 0.5kg
• Operating Temperature: -30°C à· +60°C
• Materials: Extruded aluminum, steel, coating black vinyl

The Amphenol-Procom BPF 300-500MHz bandpass filter with female BNC connectors is designed for use in RF systems where unwanted signals outside the desired band need to be blocked. Based on an LC network, it guarantees stability and high performance over a wide UHF range.

It supports power outputs up to 35W, with insertion loss ‰¤1.0dB (typical 0.7dB) and VSWR <1.5:1. The filter has compact dimensions (50x21x52mm), weighs approximately 60g and is coated in black anti-corrosion vinyl. It is also available in versions with FME, TNC or SMA connectors, for greater flexibility of use.

• Operating band: 300-500MHz
• Type: LC network bandpass filter
• Insertion loss: ‰¤1.0dB (typ. 0.7dB)
• Maximum power: 35W
• Impedance: 50?
• VSWR: <1.5:1
• Connections: BNC female
• Dimensions: 50x21x52mm
• Weight: approx. 60g
• Jacket: black anti-corrosion vinyl
• Operating temperature: -30°C à· +60°C

The BPF 4 4 FM from Amphenol Procom is a bandpass filter with 4 helical resonators and aperture coupling, designed for applications in the 88-108 MHz band. It can be used as a preselector to protect a receiver from out-of-band interference or to reduce spurious emissions from a transmitter with power up to 50 W.

The filter is tunable over the entire 88-108 MHz band and offers compact dimensions thanks to the use of helical resonators. The structure is made of extruded aluminum housing and steel chassis, while Teflon insulation is used in the coaxial cables and connectors. The black vinyl coating helps protect against corrosion and ensures reliable operation over a wide temperature range.

Key Features

• Filter Type: Bandpass
• Frequency: 88 - 108 MHz
• Bandwidth: 3 - 4 MHz
• Maximum Input Power: 50 W
• Insertion Loss: Less than or equal to 1.4 dB, typical 1.2 dB
• Impedance: 50 Ohms
• VSWR: Less than 1.5 to 1
• Connector: N female
• Dimensions: Approximately 165 x 104 x 33 mm
• Weight: Approximately 0.5 kg
• Operating temperature: -30°C to +60°C

The 66-88 MHz BNC bandpass filter is an LC filter designed to fully pass the 66-88 MHz band and be used as a preselector to protect the receiver from interference generated by transmitters outside the passband. In this model, Amphenol-Procom offers a compact solution with female BNC connectors, suitable for RF applications requiring selectivity and ease of integration.

The device is compact and coated in black vinyl to help protect against corrosion. It supports a maximum input power of 35 W, with an impedance of 50 Ohms, a typical insertion loss of up to 0.9 dB, a VSWR of less than 1.4:1 and a bandwidth of 22 MHz. Its dimensions are 50 x 21 x 48 mm including connectors, with an approximate weight of 0.06 kg and an operating temperature range of -30 °C to +60 °C.

Main Features

• LC band-pass filter for the 66-88 MHz band.
• Female BNC connectors.
• Can be used as a preselector to protect the receiver from out-of-band interference.
• Maximum input power of 35 W.
• Impedance of 50 Ohms.
• Typical insertion loss of up to 0.9 dB.
• VSWR less than 1.4:1.
• Bandwidth of 22 MHz.
• Dimensions 50 x 21 x 48 mm including connectors.
• Weight approximately 0.06 kg.
• Operating temperature -30 °C to +60 °C.
• Black vinyl coating for corrosion protection.

The BPF70/3 bandpass filter is a professional component designed to operate in the 380-470MHz band. Consisting of three 1/4 resonators with internal coupling, it is ideal as a receiver pre-selector or as a spurious filter for transmitters up to 50W. The construction uses selected materials: extruded aluminum housing, brass chassis and Teflon insulation for cables and connectors. The black vinyl coating protects against corrosion, ensuring long durability and consistent performance even from -30°C to +60°C.

• 380-470MHz bandpass with a useful bandwidth of 4MHz
• Insertion losses ‰¤1.4dB, VSWR < 1.5:1
• Impedance 50?, maximum input power 50W
• Connections N(f); on request BNC(f), TNC(f), UHF(f) or SMA(f)
• Compact dimensions 225x77x33mm (with connectors), weight approx. 0.55kg
• Rugged metal construction with protective vinyl coating
• Guaranteed operation in a wide environmental range (-30°C/+60°C)

The BPF 70 6 is a bandpass filter with 6 1 2 lambda resonators and inductive coupling between the resonators, designed for applications in the 450 MHz band. Adjustable in the 406 - 470 MHz range, it can be used as a preselector to protect the receiver from interference from out-of-band transmitters or installed at the transmitter output to reduce spurious signals.

The construction with extruded aluminum sections, steel racks, and coaxial cables with Teflon-insulated connectors ensures mechanical robustness and reliable operation over a wide temperature range. The black vinyl covering helps protect against corrosion. Amphenol Procom offers this solution for professional installations requiring stability and consistent performance.Main Features

• Bandpass Filter Type
• Frequency 406 - 470 MHz
• Maximum Input Power 50 W
• Insertion Loss Up to 3.2 dB
• VSWR Up to 1.5:1
• Bandwidth 4 MHz
• Impedance 50 Ohm
• N Connector 1; other versions available upon request
• Dimensions Approximately 230 x 154 x 33 mm with connectors
• Weight 1.0 kg
• Operating Temperature -30°C to +60°C

The BPBR 4/4 from Amphenol Procom is a 4-cavity band-pass/band-reject filter for the 66-88 MHz band, also available in an 88-108 MHz option. It is designed to pass one frequency or band and reject another in close proximity, making it particularly suitable for protecting receivers from interference from nearby transmitters when the spacing between the useful signal and the interfering signal is very close.

The BPBR model features rejection on the high side of the pass frequency and supports a pass-reject spacing from 2 to 16 MHz. Insertion loss is up to 2.0 dB at 2 MHz spacing and up to 0.6 dB at 16 MHz, while rejection attenuation is greater than or equal to 90 dB. Impedance is 50 Ohms with a VSWR of less than 1.5:1 and a maximum input power of 50 W with a 3 to 16 MHz frequency range.

The compact construction uses high-Q helical resonators with discrete interconnects. The enclosure is extruded aluminum with a passivated steel chassis and Teflon-insulated connectors, coated in black vinyl to prevent corrosion. The filter operates over a temperature range of -30°C to +60°C.Main Features

• 4-cavity band-pass/band-reject filter
• Frequency 66 - 88 MHz, optional 88 - 108 MHz
• Pass-reject spacing 2 - 16 MHz
• Insertion loss up to 2.0 dB at 2 MHz and 0.6 dB at 16 MHz
• Rejection loss greater than or equal to 90 dB
• Impedance 50 Ohm, VSWR less than 1.5:1
• Maximum power 50 W at 3 - 16 MHz, 35 W up to 3 MHz
• Female N connectors, female BNC connectors available upon request
• Dimensions 152 x 104 x 33 mm, weight approximately 0.43 kg
• Operating temperature range -30°C to +60°C

The Amphenol Procom 144-175 MHz 50 W notch filter is a 4-cavity band-reject filter with helical resonators, designed to attenuate interfering signals that cause cross-modulation effects in transmitter and receiver applications. It can be used as a single component or as an integrated part of a complete multicoupling system.

The device is tunable across the entire 144-175 MHz band and supports a maximum input power of 50 W. It is constructed with an extruded aluminum case, a passivated steel chassis, and Teflon insulation in the coaxial cables and connectors. The black vinyl coating contributes to corrosion protection, while reliable operation is guaranteed over a temperature range of -30 °C to +60 °C.

Main Features

• 4-cavity band-reject notch filter with helical resonators.
• Frequency range of 144 MHz to 175 MHz.
• Maximum input power of 50 W.
• Insertion loss less than or equal to 1 dB outside the rejection band.
• Single-channel tuned rejection attenuation greater than or equal to 75 dB.
• Impedance of 50 Ohm.
• Connection N female, with BNC female and TNC female on request.
• Dimensions of 165 x 104 x 33 mm.
• Approximate weight of 0.58 kg.
• Mounting with 6 holes with a diameter of 5 mm.
• Operating temperature from -30 °C to +60 °C.

The BOS third-party switch-ready junction box is designed to efficiently manage power and device organization in professional installations. Made of powder-coated galvanized sheet metal and featuring IP53 protection, it integrates multiple outputs, ventilation, and internal lighting to facilitate maintenance and operation. Main Features

• Primary power supply: 230 VAC with screw terminal
• Outputs: 3 x 12 VDC 3 A, 1 x 48 VDC, 1 x 230 VAC
• 2 x 230 VAC Schuko power strips
• Circuit breakers and surge arrester
• Terminal block for ground connection
• Courtesy light controlled by door opening tamper
• Fan for hot air extraction
• DIN rail for installing third-party switches
• Operating temperature: -20°C to 70°C °C
• Dimensions: 350 mm x 350 mm x 220 mm
• Protection rating: IP53
• Material: Powder-coated galvanized sheet metal

The BOS junction box with 8-port PoE switch is designed to offer maximum protection and convenience for networking and video surveillance applications. The IP66-rated tamper-proof metal cabinet ensures resistance to shock and weather, ensuring reliability even in harsh outdoor environments. The integrated 8-port Megabit PoE switch plus 2 uplinks allows you to directly power and connect IP cameras and other network devices, simplifying the infrastructure.

The 3 dedicated 12V DC outputs, along with the cooling fan and multiple service outlets, increase the flexibility of the system, allowing you to manage additional accessories and peripherals in complete safety.

• IP66 tamper-proof metal BOS cabinet
• Integrated 8-port Megabit PoE switch + 2 uplinks
• 3 12V DC outputs of 1A each
• Integrated cooling fan
• 2 multiple service outlets for accessories

The BOS BS-BALB08PL2D1 Power Supply Box is designed to ensure efficient and secure network connectivity and power management in professional systems. Equipped with an 8-port Gigabit PoE Layer 2 switch plus 2 SFP uplink ports, it supports IEEE802.3bt, af/at standards and offers power up to 90 W on the first two ports. The remaining PoE ports provide up to 30 W each, ensuring flexibility for power-hungry devices such as IP cameras or access points.

The tamper-proof metal cabinet with IP66 protection rating is resistant to dust, water and shock, with a key lock and an extraction fan for active cooling. The box integrates 3 12 V DC 1 A outputs, 2 230 Vac Schuko service sockets and a courtesy light activated by the door opening. It is grounded, has waterproof PG7 and M25 cable glands, and is available with optional accessories for wall or pole mounting.Main Features

• IP66 tamper-proof metal cabinet with key lock
• Integrated L2 switch with 8 Gigabit PoE ports + 2 SFP uplinks
• Ports 1-2 up to 90 W (IEEE 802.3bt), ports 3-8 up to 30 W (IEEE 802.3af/at)
• 3 12 Vdc 1 A outputs and 2 230 Vac Schuko service sockets
• Cooling fan and courtesy light with opening tamper
• L2 management with QoS, VLAN, MSTP, and PoE control
• Dimensions 260 x 280 x 200 mm, white color
• Operation from -40 °C to +85 °C
• Optional accessories: wall or pole mounting kit

The BS-BALS08P4GM5D1 solar power station offers a complete solution for powering video surveillance devices in areas without a power grid. Equipped with a 7-port PoE switch, it supports powering cameras and other compatible devices. The integrated industrial 4G router enables remote connection, while the intelligent controller with a 5" LCD display enables efficient management and real-time monitoring. The IP66-rated metal cabinet ensures weather resistance and vandalism protection.

Main Features:

• 7-Port PoE Switch

• Integrated industrial 4G router

• Intelligent controller with a 5" LCD display

• IP66-rated metal cabinet

• Remote management via included software

• 3 12V DC outputs for device power supply