AikomGo September Promo: free shipping

The alignment tube for cnWave V3000 60 GHz is an accessory designed to simplify the setup of Point to Point connections made with the V3000. Designed to simplify installation, it allows for more precise alignment of the wireless link even over significant distances.

With a 1.2° field of view, it supports link alignment up to 600 m, making it ideal for V3000 devices with a 0.8° beamwidth. Cambium Networks developed this solution to improve operational efficiency and accuracy during 60 GHz link commissioning. Key Features

• Compatible with cnWave V3000 60 GHz
• Support for Point-to-Point links
• Easy alignment up to 600 m
• 1.2° field of view
• Optimized for 0.8° beamwidth

The Cambium Networks PMP 450 platform increases performance with the addition of the PMP 450b subscriber module.

With the PMP 450b subscriber module, ultra-wideband radios support the entire 4.9 to 5.9 GHz band, and the gigabit Ethernet interface ensures the device achieves maximum transfer speeds. The module features a 3.5 mm audio jack, allowing direct connection of headphones without adapters. The new System on a Chip (SoC) increases packet processing power more than four times that of the 450 SM, with an aggregation capacity of more than 250 Mbps in a 40 MHz channel.

The PMP 450b 5 GHz 24 dBi subscriber module is a subscriber and backhaul solution for professional wireless networks in point-to-multipoint and point-to-point modes. The high-gain version integrates a 24 dBi antenna with a 3 dB beamwidth of 7° in azimuth and 7° in elevation, dual linear H + V polarization, greater than 25 dB front-to-back isolation, and 15 dB cross-polarization, ensuring high directivity and link stability.

The Cambium Networks device supports adaptive modulation up to 256QAM with QPSK, 16QAM, 64QAM, and 256QAM levels, sensitivity up to -94 dBm, and typical latency of 3.5 ms. The maximum range reaches 64 km in PMP mode and 200 km in PTP mode, with GPS synchronization via access point or 3.5 mm port. It integrates QoS Diffserve, ARQ, and capacity up to 50,000 PPS to ensure traffic efficiency and reliability.

Mechanically, the High-Gain version offers IP55 protection, expandable to IP67 with optional accessories, wind resistance up to 200 km/h, and operating temperature from -40°C to 60°C. Complies with ETSI EN 301 893 v2.1.1 and EN 302 502 v2.1.1 certifications, as well as FCC ID Z8H89FT0042 and ISED Canada 109W-0042. Key Features

• Integrated 24 dBi High-Gain Antenna
• 7° Azimuth and 7° Elevation Beamwidth
• Dual linear H + V polarization
• Adaptive modulation up to 256QAM
• Sensitivity up to -94 dBm
• Range up to 64 km PMP and 200 km PTP
• Typical latency 3.5 ms
• GPS synchronization and Diffserve QoS
• ARQ and 50,000 PPS
• IP55 protection, wind speeds up to 200 km/h
• Operating temperature range -40°C to 60°C

The PTP 550E connectorized point-to-point radio is a Cambium Networks solution for high-speed backhaul links in medium- and long-distance applications. It operates in the 4.9 GHz to 6.2 GHz band and is based on two independent 2x2:2 radios, for a total of four 4x4 MIMO streams, with independent configurable channels of 10, 20, 40, and 80 MHz.

Thanks to channel bonding, the system achieves a throughput of up to 1.4 Gbps using two 80 MHz channels. The Dynamic Channel Selection function automatically optimizes the operating channel to improve reliability and performance even in complex radio environments, while e-alignment via GUI supports precise installation.

The connectorized version supports single- and dual-polarity antennas via two N-type connectors. Cambium Networks also integrates live spectrum analyzer, dual-stack IPv6/IPv4 management, cnMaestro support, 128-bit AES encryption and flexible interfaces with 1 Gigabit data port plus PoE input and 1 SFP port.

The rugged metal enclosure with IP66 and IP67 protection is designed for outdoor installations in harsh conditions, with an operating temperature of -40 °C to +60 °C, wind resistance up to 322 km/h and maximum power consumption of 30 W.

Key Features

• Operating band from 4.9 GHz to 6.2 GHz.
• Connectorized Point-to-Point radio for high-speed backhaul.
• 2 independent 2x2:2 radios with 4 total streams 4x4 MIMO.
• Independent channels configurable from 10, 20, 40 and 80 MHz.
• Throughput up to 1.4 Gbps with two 80 MHz channels.
• Dynamic Channel Selection for automatic channel optimization.
• Integrated live spectrum analyzer.
• 128-bit AES encryption.
• Dual-stack IPv6/IPv4 and cnMaestro support.
• 1 Gigabit data port plus PoE input and 1 SFP port.
• 2 N-type connectors for single- and dual-polarity antennas.
• Metal enclosure with IP66 and IP67 protection.
• Operating temperature from -40 °C to +60 °C.
• Dimensions 185 x 278 x 88 mm and weight 1.6 kg with bracket.

The integrated Cambium PTP 550E is a professional point-to-point radio that combines power and reliability for high-performance wireless backhaul applications. Operating in the 4.9 GHz band, it supports throughput up to 1.4 Gbps thanks to the management of two independent channels up to 80 MHz each.

The radio features an integrated 23 dBi flat panel antenna and is housed in an IP66/67 metal enclosure, designed to withstand extreme environmental conditions. Advanced features include Dynamic Channel Selection (DCS), which automatically selects the most unoccupied channels, and a built-in spectrum analyzer for real-time monitoring without impacting data traffic. cnMaestro and TDD Sync support simplify management and integration into next-generation Cambium networks.

Key Features

• Operating Band: 4.9 - 6.2 GHz
• Up to 1.4 Gbps Aggregate Throughput
• Integrated 23 dBi Flat Panel Antenna
• IP66/67 Weatherproof Metal Enclosure
• Channel Bonding with Channels up to 80 MHz
• Dynamic Channel Selection and Integrated Spectrum Analyzer
• cnMaestro Compatibility and TDD Sync Support
• Ideal for Mid-Range and Long-Range Links

The 1G 1310nm SFP module for PTP 550 is a single-mode optical module with a 1000BaseLX interface for ODUs, designed for use with the PTP 550 and PTP 550E systems. Within the Cambium Networks range, it represents a dedicated solution for 1G links with a wavelength of 1310 nm.

The kit includes the SFP module and the P16 long Cable Gland, while the indicated spare part for the glands is N000000L140A. The operating temperature range of -40°C to +85°C allows the module to be used in scenarios with challenging environmental conditions.

Main Features

• Single-mode optical SFP module.
• 1000BaseLX interface for ODU.
• 1G speed.
• 1310 nm wavelength.
• Compatible with PTP 550 and PTP 550E.
• Kit consisting of SFP module and P16 long cable gland.
• Spare glands: N000000L140A.
• Operating temperature range of -40°C to +85°C.

Wireless service providers and enterprises around the world must ensure reliable connectivity in crowded RF environments. Spectrum is becoming increasingly scarce, and finding the right broadband connectivity solution is vital for all low- and high-density deployments.

Cambium Networks solves this challenge with a revolutionary technology solution that delivers superior performance, resilience, and coverage in the most congested environments. The ePMP Force 300-19R, integrating the latest 802.11ac Wave 2 technology, offers up to 600 Mbps of capacity. It is a powerful yet affordable subscription module compatible with the ePMP 3000 access point and, leveraging forward compatibility features, also interoperates with the ePMP 2000, thus facilitating the migration to 802.11ac Wave 2 technology. The ePMP Force 300-19R has an integrated 19 dBi antenna with a narrow beamwidth.

Strengths

The Cambium Networks ePMP Force 300-19R is designed to operate in high-interference environments and provides superior throughput of up to 600 Mbps of real-world user data.

The ePMP Force 300-19R also supports 5 and 10 MHz narrow channels, particularly useful in the 4.9 GHz licensed bands and other areas where smaller channels are required.

ePMP Force The 300-19R supports real-time spectrum monitoring without throughput degradation.

Configurable operating modes ensure robust adaptability to symmetric and asymmetric traffic, while providing high performance and round-trip latencies as low as 3-5 ms.

QoS management ensures exceptional quality for triple-play services, VoIP, video, and data, and provides three levels of traffic priority.

The integrated 19 dBi antenna is compact and offers excellent range.

The ePMP Force 300-19R is easy to install and can be mounted on a pole or wall.

The Cambium Networks ePMP sector antenna is designed for point-to-multipoint wireless networks requiring adaptable coverage and reliable performance. It offers adjustable 90/120° beamwidth, with 2x2 MIMO technology for increased capacity and spectral efficiency. Rugged construction with quality connectors ensures durability even in harsh environments. Compatible with the Cambium Networks ePMP range, it enables scalable installations and ensures consistent signal quality with reduced interference.

Key Features

• Adjustable beam angle: 90/120°
• 2x2 MIMO technology for increased capacity
• Optimized for point-to-multipoint networks
• Rugged, weatherproof connectors
• Compatible with the Cambium ePMP range
• Ideal for scalable and professional installations

The Cambium Dual Horn MU-MIMO ePMP 3000 antenna was developed to optimize the performance of ePMP 3000 access points in high-density scenarios. The dual-horn design improves signal distribution and reduces the impact of lateral interference, increasing connection stability.

Thanks to MU-MIMO (Multi-User MIMO) technology, the antenna enables simultaneous transmission to multiple clients, increasing network capacity and optimizing spectral efficiency. Designed for outdoor applications, it combines durability, reliability and high performance, making it suitable for operators and WISPs that require scalable and robust solutions.

Main Features

• Compatible with Cambium ePMP 3000 access points
• MU-MIMO technology for multi-user transmission
• Dual Horn design for interference reduction
• Higher capacity and signal quality in high-density areas
• Rugged construction for outdoor installations

Cambium Networks' ePMP product line has set the standard for high performance, scalability, and reliability in harsh interference environments, all at an attractive price. The ePMP 3000 is the third-generation access point that advances the interference-tolerant mechanisms of the ePMP 2000 while adding the power of Multi-User MIMO (MU-MIMO). The ePMP 3000 is a 4x4 MU-MIMO access point that can double industry-leading throughput with the same channel bandwidth by serving two subscribers simultaneously. Additionally, the ePMP 3000 integrates interference mitigation techniques with uplink directional antenna support, dynamic adjacent-channel interference filtering, and robust ePMP product line software. The ePMP 3000 AP system consists of the ePMP 3000 AP access point, a 4x4 sector antenna, an optional directional antenna, and 25 dBi and 16 dBi subscriber modules.

The ePMP 3000 system boasts high packet per second performance, 1.2 Gbps peak throughput, and support for subscriber modules with 600 Mbps peak throughput.

Key Benefits

Frequency Reuse: Supports GPS synchronization and SM transmit power control, enabling frequency reuse.

Unmatched Performance and Scalability: With Cambium Networks' efficient MAC protocol and advanced air-fairness scheduler, up to 120 simultaneously active subscriber modules can be served without degradation. Performance.

Industry-Leading Interference Tolerance: Intelligent filtering on the receive side makes the ePMP 3000 immune to the effects of strong off-channel interference, and on the transmit side it serves to reduce off-channel noise for improved radio co-location.

Industry-Leading Spectral Efficiency: MU-MIMO in the downlink doubles the industry's capacity by serving two MIMO users simultaneously.

Key Specifications

• MU-MIMO support with 1.2 Gbps peak throughput
• 256QAM-5/6, 80 MHz support
• Supports a wide frequency range: 4910 - 5970 MHz
• 100/1000BaseT interface compliant with 802.3at
• Frequency Reuse with GPS synchronization, interference mitigation with a directional antenna and dynamic filter

The Cambium Networks ePMP Force 300-25, model C050910C203B, is a subscriber module designed to provide high-performance connectivity in point-to-point (PTP) and point-to-multipoint (PMP) networks in the 5 GHz band. With an integrated 25 dBi antenna, it ensures robust links over long distances.

Based on 802.11ac Wave 2 technology, it offers throughput up to 600 Mbps and latencies up to 2 ms thanks to ePTP mode. It is fully interoperable with ePMP 3000 access points, supporting MU-MIMO, and backward compatible with ePMP 2000 and 1000 to facilitate the migration of existing networks. Advanced features include three-level QoS for voice, video, and data, an always-on spectrum analyzer, and simplified management with cnMaestro.

Key Features

• Operating Band: 5 GHz (4.9 - 6.08 GHz, subject to local regulations)
• Built-in 25 dBi antenna
• Throughput up to 600 Mbps
• Latency as low as 2 ms with ePTP mode
• Compatible with ePMP 3000, 2000, and 1000 access points
• 802.11ac Wave 2 technology with 2x2 MIMO
• Three-level QoS (voice, video, data)
• Centralized management with Cambium Networks cnMaestro
• IP55 protection and PoE power included

I fornitori di servizi wireless e le aziende di tutto il mondo in ambienti RF sovraffollati devono garantire una connettività  affidabile. Lo spettro sta diventando un bene sempre pi๠scarso, e trovare la giusta soluzione di connettività  a banda larga vitale per tutte le tipologie d'implementazione a bassa e ad alta densità .

Cambium Networks risolve questa sfida con una soluzione tecnologica rivoluzionaria che offre prestazioni, resilienza e portata superiori in ambienti pi๠congestionati. Il Force 300-16, combinando il chipset 802.11AC Wave 2 e il TDD MAC di ePMP, un ottimo dispositivo con accesso punto-a-punto compatibile con l'access point ePMP 3000.ePMP Force 300-16 continua la tradizione dei precedenti prodotti con antenna integrata da 16 dbi con una stretta larghezza del fascio e una meccanica affidabile. Supporta un throughput di picco superiore a 500 Mbps, un analizzatore di spettro, e la gestione WiFi locale per sfruttare le applicazioni d'installazione mobile.Punti di forzaePMP Force 300-16 di Cambium Networks progettato per funzionare in ambienti ad alta interferenza e fornisce un throughput superiore di oltre 500 Mbps di dati utente reali.ePMP Force 300-16 supporta la configurazione delle dimensioni del canale da 20 MHz a 80 MHz e modula fino a 256 QAM.ePMP Force 300-16 supporta una connessione Wi-Fi locale per consentire una facile installazione, configurazione e monitoraggio da qualsiasi dispositivo abilitato Wi-Fi.ePMP Force 300-16 supporta il monitoraggio dello spettro in tempo reale senza degrado del throughput.Le modalità  operative configurabili assicurano una robusta adattabilità  al traffico simmetrico e asimmetrico, fornendo prestazioni elevate e latenza di andata e ritorno a partire da 3-5 ms.La gestione QoS offre una qualità  eccezionale per i servizi triple play, VoIP, video e dati, e fornisce tre livelli di priorità  del traffico.Grazie al supporto con orientamento orizzontale per una larghezza del fascio di 15 gradi e un guadagno di 16 dBi, ePMP Force 300-16 offre in modulo compatto e conveniente, una soluzione punto-punto resistente alle interferenze.ePMP Force 300-16 facile da installare e puಠessere montato su palo o a parete.