AikomGo September Promo: free shipping
Valid until 30 September 2026
Consult over 2,000 available products and purchase the most suitable solutions for your next projects, without transport costs.
The discount is automatically applied at checkout, without the need for promotional codes.
The promo is valid only for shipment to Italy.
Feedhorn ePMP Force 4525L 5 GHz for 200L
The Force 4525L 5 GHz 200L ePMP Feedhorn is designed to upgrade ePMP systems by simply replacing the feedhorn on existing SMs, without the need to align a new dish. This solution simplifies installations, reduces operating costs, and minimizes waste when migrating from previous ePMP generations.
With the Force 4525L ePMP Feedhorn, Cambium Networks guarantees the same PTP and PMP performance, mechanics, and interfaces as the standard Force 4525 SM, as well as a 3-year hardware warranty. The device supports advanced QoS features and management via cnMaestro for centralized provisioning, monitoring, and updates. Key Features
- Wideband frequency band 5150 – 5920 MHz
- 2x2 MIMO OFDMA technology with adaptive modulation from MCS 0 to MCS 11 1024 QAM 5/6
- Configurable channel width with 5 MHz step spacing
- Transmit power from +3 to +28 dBm in compliance with regional EIRP limits
- 100/1000 BaseT Ethernet interface, PoE compatible
- 128-bit AES encryption with optional 256-bit AES where permitted
- IP55 rating and wind resistance up to at 200 km/h
- Operating temperature: -30°C to 55°C
- Parabola gain: 25 dBi with a 3 dB beamwidth of 7°
- Dimensions: 472 x 472 x 281 mm and weight: 1.88 kg
- 3-year hardware warranty
Feedhorn ePMP Force 4525L 5 GHz for 200
The Force 4525L 5 GHz ePMP Feedhorn for 200 allows you to upgrade existing ePMP Subscriber Modules by simply replacing the feedhorn, without the need to install and align a new dish. This solution simplifies installations and makes migration to next-generation platforms more efficient.
Offered by Cambium Networks, it maintains the same PTP and PMP performance, mechanics, and interfaces as the standard Force 4525 SM, including a 3-year hardware warranty. It supports proprietary 2x2 MIMO/OFDMA technology, wideband operation from 5150–5920 MHz, multi-level QoS, and management via cnMaestro. Key Features
- Feedhorn replacement only without dish realignment
- Proprietary 2x2 MIMO/OFDMA technology
- Frequency band from 5150–5920 MHz
- Configurable channels with 5 MHz spacing
- PoE-compatible 100/1000 BaseT Ethernet interface
- Transmit power from +3 to +28 dBm
- 128-bit AES encryption with optional 256-bit AES encryption
- Tri-level QoS for voice, video, and Data
- IP55 rating
- Operating temperature -30°C to 55°C
- Antenna gain 25 dBi, beamwidth 7°
- 3-year hardware warranty
ePMP 4600 4x4 6 GHz access point
The Cambium Networks ePMP 4600 4x4 access point, model C060940A223C, is the ideal solution for high-performance PMP networks. It operates in the 6 GHz band (5.725-7.125 MHz, depending on local regulations) and supports channels up to 160 MHz with modulation up to 4096 QAM.
Based on 802.11ax technology, it integrates 4x4 MU-MIMO and OFDMA, doubling the capacity of 2x2 solutions and delivering up to 4 Gbps aggregate. Downlink beamforming further increases link efficiency, while GPS synchronization reduces co-channel interference. Management via cnMaestro and IP67 protection make this access point scalable, robust and reliable for professional outdoor installations.
Main Features- Operating band: 6 GHz (5.725 - 7.125 MHz)
- Aggregate throughput up to 4 Gbps
- 4x4 MU-MIMO and OFDMA technology
- Support for up to 120 subscriber modules
- Downlink beamforming for better performance
- Channels up to 160 MHz and modulation up to 4096 QAM
- GPS synchronization and TDD Sync
- Centralized management via cnMaestro
- Rugged chassis with IP67 certification
Subscriber module ePMP Force 4600C 6 GHz
The Cambium Networks ePMP Force 4600C, model C060940C223C, is a next-generation connectorized subscriber module designed to deliver high performance in point-to-multipoint networks. It operates in the 6 GHz band (5.725 - 7.125 MHz depending on local regulations) and is fully compatible with ePMP 4600 access points.
Based on 802.11ax technology, it integrates 4x4 MU-MIMO and OFDMA, achieving throughput of up to 4 Gbps. The connectorized design allows the use of external sector or parabolic antennas, making it extremely flexible for long-range or high-density scenarios. Advanced features include TDD Synchronization to reduce interference, three-level QoS for voice, video, and data, and cnMaestro management for centralized control. The IP67 case makes it suitable for outdoor installations even in difficult environmental conditions.
Main Features- Operating band: 6 GHz (5.725 - 7.125 MHz)
- Aggregate throughput up to 4 Gbps
- 802.11ax technology with 4x4 MU-MIMO and OFDMA
- Compatible with ePMP 4600 access points
- Connectorized design for external antennas
- TDD Synchronization and three-level QoS
- Centralized management with cnMaestro
- IP67 rugged case for outdoor use
Subscriber module ePMP Force 4616 6 GHz
The Cambium Networks Force 4616 6 GHz ePMP subscriber module is designed for fixed wireless broadband applications in point-to-point and point-to-multipoint scenarios. It operates in the 5925-7125 MHz frequency range and supports 20, 40, 80, and 160 MHz channel widths, with a 2x2 MIMO/OFDMA-based ePMP radio interface.
This solution is suitable for service providers, enterprises, industrial, and government organizations requiring high capacity, low latency, and simplified network management. Cambium Networks claims interoperability with ePMP 4600 access points in PMP applications, up to Gbps capacity in PTP applications, and management via cnMaestro for provisioning, monitoring, and updates.
From a hardware standpoint, it integrates a 16 dBi panel antenna, a 100/1000 BaseT Ethernet port with auto-negotiation, integrated 1 Joule surge protection, and an IP55 rating. It also supports 802.1Q VLANs with 802.1p priority, three-level QoS, and 128-bit AES encryption, with optional 256-bit AES where allowed.
Key Features
- 6 GHz subscriber module for PTP and PMP fixed wireless broadband applications
- 5925-7125 MHz frequency range
- 20, 40, 80, and 160 MHz channel widths
- ePMP interface with 2x2 MIMO/OFDMA
- Up to Gbps throughput in PTP applications
- Sub-5 ms latency with ePTP technology
- Interoperable with ePMP 4600 access points in PMP applications
- Integrated 16-gauge panel antenna dBi
- 100/1000 BaseT Ethernet port
- Management via HTTP, HTTPS, SNMPv1/2, SNMPv3 and SSH
- Support for IPv4/IPv6, UDP, TCP, IP, ICMP, SNMPv2c, HTTPs, STP, SSH and IGMP snooping protocols
- 802.1Q VLAN with 802.1p priority
- Three-level QoS with classification by DSCP, COS, VLAN ID, IP and MAC address, broadcast, multicast and station priority
- 128-bit AES encryption in CCMP mode, optional 256-bit AES where allowed
- Integrated 1 Joule surge protection
- IP55 rating
- Operating temperature -30°C to 55°C °C
- 13W power consumption, up to 15W in extreme cold conditions with heater active
- 22V to 56V input voltage
- Includes PoE injector and pole mounting hardware
- 3-year hardware warranty
- Part number C060940C233A corresponds to the EU version with EU cable
ePMP 4600 4x4 MU-MIMO 6 GHz Sector Antenna
The Cambium Networks ePMP 4600 4x4 MU-MIMO Sector Antenna, model C060940D301A, is designed to maximize the performance of ePMP 4600 access points. Designed for the 6 GHz band, it offers up to 19 dBi gain with optimized sector coverage for high-capacity point-to-multipoint scenarios.
Thanks to 4x4 MU-MIMO technology, it enables more efficient traffic management, improving throughput and connection quality even in densely populated environments. The sector design reduces interference and improves spectral efficiency. The ruggedized IP67-certified structure ensures reliability even in difficult weather conditions, making it suitable for long-term professional deployments.
Key Features- Original Cambium accessory for ePMP 4600 access points
- Operating band: 6 GHz
- 4x4 MU-MIMO technology
- Gain up to 19 dBi
- Sector-specific design for interference reduction
- IP67 protection for outdoor installations
- Rugged and durable structure
Subscriber module ePMP Force 4625 SM 6 GHz
The Cambium Networks ePMP Force 4625 SM 6 GHz subscriber module is designed for point-to-point and point-to-multipoint fixed wireless broadband applications, offering high capacity and low latency in scenarios where available spectrum is limited. The device supports channels up to 160 MHz, interoperability with ePMP 4600 access points, and centralized management via cnMaestro for simple provisioning, monitoring, and updates.
The module integrates a 25 dBi dish antenna and is supplied with a PoE injector and pole-mount hardware. Cambium Networks offers it as a solution for service providers, enterprises, industrial and government environments that require high-performance PTP and PMP wireless broadband connectivity.
Key Features
- 6 GHz subscriber module for PTP and PMP applications
- 20, 40, 80 and 160 MHz channels
- ePMP radio interface with 2x2 MIMO/OFDMA
- 5925 to 7125 MHz frequency range
- Integrated 25 dBi dish antenna
- Sub-5 ms latency with ePTP technology
- Interoperability with ePMP 4600 series access points
- 100/1000 BaseT Ethernet interface with auto-negotiation
- Management via HTTP/HTTPS, SNMPv1/2, SNMPv3 and SSH
- IPv4/IPv6, UDP, TCP, IP, ICMP, SNMPv2c, HTTPS, STP, SSH, and IGMP snooping protocols
- Three-level QoS with traffic classification
- 128-bit AES encryption in CCMP mode, optional 256-bit AES where allowed
- PoE injector and pole-mount hardware included
- 3-year hardware warranty
Microwave antenna 24.25-26.5 GHz 0.9 m
The 24.25-26.5 GHz 0.9 m microwave antenna is a solution for point-to-point links in the 24.250-26.500 GHz band, classified as a microwave antenna and identified in the high-performance low-profile single-polarized ValuLine line. With a nominal diameter of 0.9 m, this SAF Tehnika model combines a compact profile with detailed electrical parameters, useful for installations that require precision and regulatory compliance.
In detail, the product offers gain of 45.6 dBi in the low band, 45.8 dBi in the mid band and 46.2 dBi in the top band, boresite cross-polarization discrimination of 30 dB, front-to-back ratio of 72 dB, horizontal beamwidth of 0.9° and vertical beamwidth of 0.9°. The specifications are completed by a return loss of 17.7 dB, VSWR of 1.3 and reference RPE 7156A. SAF Tehnika also offers electrical compliance with Brazil Anatel Class 2, ETSI 302 217 Class 3 and US FCC Part 101A.
From a construction point of view, the antenna is of the VHLP type, ValuLine High Performance Low Profile Antenna, with single polarization. General specifications indicate 0 included side struts and an optional inboard side strut.
Main Features- Operating band 24.250-26.500 GHz.
- Nominal diameter of 0.9 m, equal to 3 ft.
- VHLP ValuLine High Performance Low Profile Antenna type.
- Single polarization.
- Low band gain of 45.6 dBi.
- Mid band gain of 45.8 dBi.
- Top band gain of 46.2 dBi.
- Boresite cross polarization discrimination of 30 dB.
- Front-to-back ratio of 72 dB.
- Horizontal beamwidth of 0.9°.
- Vertical beamwidth of 0.9°.
- Return loss of 17.7 dB.
- VSWR of 1.3.
- Radiation Pattern Envelope Reference 7156A.
- Compliant with Brazil Anatel Class 2, ETSI 302 217 Class 3 and US FCC Part 101A.
- Side struts included: 0, optional side strut: 1 inboard.
Microwave antenna 24.25-26.5 GHz 0.3 m
The ValuLine microwave antenna is a solution designed to operate in the 24.25-26.5 GHz band, with a nominal diameter of 0.3 m and electrical characteristics suitable for radio installations requiring directivity and pointing precision. Within the SAF Tehnika portfolio, this model combines gain up to 37.5 dBi, XPD of 30 dB, return loss of 17.7 dB, and VSWR of 1.3.
Mechanically, the antenna is compatible with mounting pipes from 48 mm to 120 mm and features fine azimuth adjustment of plus or minus 15°. The net weight is 4.08 kg and the declared electrical compliance includes Brazil Anatel Class 2 and ETSI 302 217 Class 3, while the product is designed, manufactured and/or distributed under the ISO 9001:2015 quality management system.
Main Features- Product type: ValuLine microwave antenna.
- Operating band: 24.250-26.500 GHz.
- Nominal diameter: 0.3 m.
- Gain: 36.3 dBi low band, 36.9 dBi mid band, 37.5 dBi top band.
- Boresite cross polarization discrimination: 30 dB.
- Front-to-back ratio: 63 dB.
- Horizontal beamwidth: 2.5°.
- Vertical beamwidth: 2.5°.
- Return loss: 17.7 dB.
- VSWR: 1.3.
- Radiation Pattern Envelope Reference: 7018D.
- Mounting pipe compatibility: 48 mm-120 mm.
- Azimuth fine adjustment: plus or minus 15°.
- Net weight: 4.08 kg.
- Electrical compliance: Brazil Anatel Class 2, ETSI 302 217 Class 3.
Microwave antenna 24.25-26.5 GHz 0.6 m
The 0.6 m microwave antenna from the ValuLine range is designed to operate in the 24.25-26.5 GHz band with single polarization. Within the SAF Tehnika offering, this model combines compact dimensions and defined electrical specifications for applications requiring high performance and compliance with various regulatory references.
The product offers a gain of 41.5 dBi in the low band, 42 dBi in the mid band, and 42.5 dBi in the top band, with a horizontal and vertical beamwidth of 1.5 degrees. Completing the specifications are boresite cross polarization discrimination of 30 dB, return loss of 17.7 dB, VSWR of 1.3, and a 7206D radiation pattern envelope reference. The nominal diameter is 0.6 m.
Main Features
- VauLine single-polarization microwave antenna.
- Operating band 24.25-26.5 GHz.
- Nominal diameter of 0.6 m.
- Gain up to 42.5 dBi.
- Horizontal and vertical beamwidth of 1.5 degrees.
- Boresite cross polarization discrimination of 30 dB.
- Front-to-back ratio of 68 dB.
- Return loss of 17.7 dB and VSWR of 1.3.
- Radiation pattern envelope reference 7206D.
- Electrical compliance ETSI 302 217 Class 3, US FCC Part 101A, Canada SRSP 325.25 and Brazil Anatel Class 3.
Microwave antenna 24.25-26.5 GHz 0.6 m
The 0.6 m microwave antenna from the ValuLine range is designed to operate in the 24.25-26.5 GHz band with single polarization. Within the SAF Tehnika offering, this model combines compact dimensions and defined electrical specifications for applications requiring high performance and compliance with various regulatory references.
The product offers a gain of 41.5 dBi in the low band, 42 dBi in the mid band, and 42.5 dBi in the top band, with a horizontal and vertical beamwidth of 1.5 degrees. Completing the specifications are boresite cross polarization discrimination of 30 dB, return loss of 17.7 dB, VSWR of 1.3, and a 7206D radiation pattern envelope reference. The nominal diameter is 0.6 m.
Main Features
- VauLine single-polarization microwave antenna.
- Operating band 24.25-26.5 GHz.
- Nominal diameter of 0.6 m.
- Gain up to 42.5 dBi.
- Horizontal and vertical beamwidth of 1.5 degrees.
- Boresite cross polarization discrimination of 30 dB.
- Front-to-back ratio of 68 dB.
- Return loss of 17.7 dB and VSWR of 1.3.
- Radiation pattern envelope reference 7206D.
- Electrical compliance ETSI 302 217 Class 3, US FCC Part 101A, Canada SRSP 325.25 and Brazil Anatel Class 3.
24/26 GHz antenna integration kit
The 24/26 GHz Antenna Integration Kit is a solution designed to connect Integra radios to ValuLine antennas in the 24/26 GHz band, as indicated in the information provided. In the installation manual, SAF Tehnika describes this assembly as an integration component to be used in conjunction with the feed assembly and mounted in the antenna reflector.
The accompanying documentation lists the main components of the kit, including the transition, O-ring, countersunk screws, silicone grease, and interface plate, as well as assembly instructions and fastener torque values. Specific mounting configuration instructions are also provided based on the radio model used.
Main Features
- Integration kit for connection between Integra radios and ValuLine 24/26 GHz antennas.
- Designed for mounting in the antenna reflector together with the feed assembly.
- Components indicated in the manual: transition, O-Ring, M8x16 screws, silicone grease, M6x16 screws and interface plate.
- Dedicated installation instructions for SAF Antenna assemblies.
- Mounting configuration dependent on the radio model used.
- Table with torque specifications for stainless steel and zinc-plated steel fasteners.
- Installation, maintenance and removal recommended by qualified personnel.