AikomGo September Promo: free shipping
Valid until 30 September 2026
Consult over 2,000 available products and purchase the most suitable solutions for your next projects, without transport costs.
The discount is automatically applied at checkout, without the need for promotional codes.
The promo is valid only for shipment to Italy.
7' PoE IP Indoor Control Station
The 7'' PoE IP Indoor Control Station offers a modern and intuitive interface for video intercom systems. The 1024 x 600 pixel capacitive TFT LCD display ensures simple and immediate use. It supports standard 802.3af PoE for power and wired network connection, or Wi-Fi b/g/n for greater flexibility.
You can answer calls from external stations, view video feeds from connected cameras, and unlock doors directly via the Hik-Connect app or client software. It features 8 alarm inputs, 2 relay outputs for door control and an RS-485 interface for integration with other devices. The microSD slot up to 32 GB allows local storage of images and notifications.
Based on an embedded Linux system, with 32 MB ROM and 128 MB RAM, it is compact (200 x 140 x 15.1 mm) and lightweight (355 g), with power consumption less than 5 W. It is intended for indoor installations, operating between -10 °C and 55 °C.Main Features
- 7'' TFT LCD capacitive touch display (1024 x 600)
- 802.3af PoE power supply and Wi-Fi support (802.11b/g/n)
- MicroSD slot up to 32 GB
- 8 alarm inputs, 2 relay outputs, RS-485
- System Embedded Linux, 32 MB ROM, 128 MB RAM
- Dimensions: 200 x 140 x 15.1 mm; weight 355 g
- Power consumption < 5 W; operating temperature -10 °C - 55 °C
2-wire 7-inch Wi-Fi indoor station
E Series 600mm Cabinet Fan
The 600 mm E Series Cabinet Fan is an accessory dedicated to E Series floor-standing cabinets with a depth of 600 mm. Designed for this specific type of cabinet, it supports the ventilation of the structure and contributes to more effective cooling management in professional environments.
The Hikvision solution includes 2 fans and is designed for integration with E Series floor-standing cabinets, ensuring compatibility with 600 mm deep cabinets.
Main Features- Fan accessory for E Series floor-standing cabinets
- Compatible with E Series cabinets with a depth of 600 mm
- Supplied with 2 fans
- Designed to support cabinet cooling
Esprit AC Bispectral VGA 50° 8.7mm PTZ Camera
The Esprit AC Bispectral VGA 50° 8.7mm PTZ Camera combines thermal and visual imaging in a single professional solution for advanced security applications. It features a 640 x 512 VGA thermal sensor with an uncooled VOx microbolometer and an 8.7 mm lens with a 50° horizontal and 37.5° vertical field of view, ensuring high detection capabilities.
The visual component integrates a 1/2.8"" 2 MP CMOS sensor with up to 40x optical zoom and 12x digital zoom, supporting up to 60 fps visual and up to 30 fps thermal. The Pelco solution offers ONVIF Profile G, M, S, and T compliance, 100BASE-FX networking, advanced streaming and management protocols, as well as security features such as HTTPS encryption, 802.1x authentication, and signed firmware.
Key Features
- 640 x 512 VGA thermal sensor with an uncooled VOx microbolometer
- Thermal lens 8.7 mm with 50° horizontal and 37.5° vertical field of view
- Thermal image rate up to 30 fps
- 1/2.8"" 2 MP CMOS image sensor
- Up to 40x optical zoom and 12x digital zoom
- 120 VAC power supply
- 100BASE-FX network
- ONVIF Profile G, M, S, and T compliance
- IPv4, IPv6, HTTP, HTTPS, RTSP, RTP, TCP, UDP, SNMP v2c and v3 protocols
- Password protection, HTTPS encryption, 802.1x authentication
Sarix Multi Pro 15 MP 3 imager 2.8mm 270
Indoor Bluetooth Beacon e-BBE9
The e-BBE9 indoor Bluetooth beacon is designed by Emerit to support detailed location of lone workers indoors, where GPS coverage is insufficient. Combined with Emerit's algorithm, it enables customizable indoor coverage based on site configurations, such as floors, areas, and corridors.
The device uses Bluetooth 5.0 and offers a range of approximately 20 m. By installing beacons on stairways or elevators, it is possible to detect floor changes and obtain more detailed indoor location.
Emerit designed the e-BBE9 as a discreet beacon that is easy to install on the wall with double-sided adhesive or screws. The device can be easily opened to replace the battery or to turn it on and off, with a battery life of more than 24 months. It is specifically configured to work with Emerit safety devices.
Key Features- Indoor Bluetooth beacon for lone worker location
- Bluetooth 5.0
- Range of approximately 20 m
- Detailed and customizable location for floors, areas and corridors
- Floor change detection via beacon on stairs or elevators
- 1,000 mAh battery with replaceable 1xCR button cell
- Autonomy of more than 24 months
- IP65 protection
- CE and FCC standards
- Wall installation with double-sided adhesive or screws
- Diameter 49 mm
- Width 66 mm
- Thickness 17.5 mm
- Configured to work with Emerit security devices
Raspberry Pi HAT+ 4G Calyx module
The Teltonika Raspberry Pi HAT+ 4G Calyx module is an embedded cellular connectivity solution designed to provide mobile internet access to Raspberry Pi 4 and 5-based systems in scenarios where Wi-Fi or Ethernet are unavailable or unreliable. It mounts directly onto the SBC via a 40-pin header, ensuring compact and tidy integration.
The 4G version supports LTE Cat 4 with speeds up to 75 Mbps download and 50 Mbps upload over LTE-FDD, as well as LTE-TDD, DC-HSPA+, 3G, and 2G. It features a push-pull Nano SIM slot, two SMA connectors for mobile antenna, status LEDs, and power via a 40-pin header or USB Type-C. Modem control via GPIO allows wake and reset functions directly from the Raspberry Pi pins.
Main Features
- Raspberry Pi HAT+ module with 4G LTE Cat 4 connectivity
- Up to 75 Mbps DL and 50 Mbps UL on LTE-FDD
- Supports LTE-TDD, DC-HSPA+, 3G, and 2G
- Compatible with Raspberry Pi 4 and 5, mounts on a 40-pin header
- One 4FF push-pull Nano SIM slot
- Two SMA connectors for mobile antenna
- Status LEDs: Power, NET IND, NET STAT
- Modem control via GPIO
- Dimensions: 56 x 23.11 x 95.48 mm; weight: 57 g
Raspberry Pi HAT+ 5G Calyx module
The Teltonika Raspberry Pi HAT+ 5G Calyx module is an embedded cellular connectivity solution designed to ensure reliable mobile internet access on Raspberry Pi 4 and 5, especially in environments where Wi-Fi or Ethernet are unavailable or unstable. It mounts directly onto the SBC via a 40-pin header, ensuring compact and tidy integration.
It supports Sub-6GHz 5G networks in SA and NSA modes with speeds of up to 3.4 Gbps download and 900 Mbps upload thanks to 4x4 MIMO technology in the downlink. It is backward compatible with 4G LTE Cat 19 up to 1.6 Gbps download and 200 Mbps upload, and with 3G up to 42 Mbps download and 5.76 Mbps upload. It features four SMA connectors for mobile antennas, one 4FF push-pull Nano SIM slot, Power, NET IND, and NET STAT status LEDs, PCM support for low-latency audio, and modem control via GPIO.
Power can be supplied via the Raspberry Pi header at 5 VDC and 3.3 VDC or via the 5 VDC USB Type-C port. The operating temperature ranges from -40°C to 75°C. The dimensions are 56 x 23.11 x 100.8 mm and the weight is 57 g.
Main Features
- Raspberry Pi HAT+ Module with 5G Sub-6GHz SA and NSA
- Up to 3.4 Gbps DL and 900 Mbps UL in 5G
- 4G LTE Cat 19 up to 1.6 Gbps DL and 200 Mbps UL
- 3G support up to 42 Mbps DL and 5.76 Mbps UL
- 4 SMA connectors for mobile antenna
- 1 4FF push-pull Nano SIM slot
- 40-pin header with GPIO and PCM audio functions
- Power supply 5 VDC and 3.3 VDC from header or USB Type-C 5 VDC
- Status LEDs: Power, NET IND, NET STAT
- Operating temperature: -40°C to 75°C
- Dimensions: 56 x 23.11 x 100.8 mm; weight: 57 g
Raspberry Pi HAT+ 5G RedCap Calyx Module
The Teltonika RedCap Calyx Raspberry Pi HAT+ 5G module is designed to provide 5G mobile connectivity on Raspberry Pi 4 and 5 platforms via a 40-pin GPIO header. It offers a compact solution that can be integrated into IoT and industrial projects requiring reliable cellular communication.
It supports Sub-6GHz 5G NR SA networks with speeds up to 223 Mbps download and 123 Mbps upload, as well as backward compatibility with 4G LTE Cat 4 with speeds up to 195 Mbps download and 105 Mbps upload. It features two SMA connectors for mobile antennas, one 4FF push-pull Nano SIM slot, and status LEDs for Power, NET IND, and NET STAT.
Power can be supplied via the Raspberry Pi headers at 5 VDC and 3.3 VDC or via USB Type-C at 5 VDC. The module operates over a temperature range of -40°C to 75°C, measures 56 x 23.11 x 95.48 mm, and weighs 57 g.
Key Features
- Raspberry Pi HAT+ Module with 5G NR SA Sub-6GHz
- Up to 223 Mbps DL and 123 Mbps UL in 5G
- 4G LTE Cat 4 up to 195 Mbps DL and 105 Mbps UL
- 2 SMA connectors for mobile antenna
- 1 4FF push-pull Nano SIM slot
- 40-pin GPIO header compatible with Raspberry Pi 4 and 5
- 5 VDC and 3.3 VDC power supply Header or USB Type-C 5 VDC
- Status LEDs: Power, NET IND, NET STAT
- Operating temperature: -40°C to 75°C
- Dimensions: 56 x 23.11 x 95.48 mm; weight: 57 g
Pole Bracket and Adapter Kit
The Selea EBP002GP support arm with collar is an accessory specifically designed for pole mounting of the TARGA series license plate reading cameras (models 2xx, 5xx, 7xx, 8xx, 9xx). Thanks to its robust design and variable diameter, it supports poles with sizes from 50mm to 140mm, ensuring a stable and precise position of the camera even in complex environmental conditions.
Ideal for applications on roads, car parks and entrances, it guarantees a safe and long-lasting installation, perfectly integrable with the TARGA series without requiring additional kits.
Main features- Compatible with TARGA series license plate reading cameras (2xx, 5xx, 7xx, 8xx, 9xx)
- Supported pole diameter: 50mm - 140mm
- Arm + support collar for pole installations
- Designed for professional outdoor applications
Brand and model recognition algorithm license
The ECPSMEM license is an extension of the CPS 6.0 system designed to integrate and enhance license plate reading functionality by identifying the make and model of vehicles. Designed for each individual viewing point, it allows for more detailed and precise data to be obtained even on existing infrastructures, thanks to compatibility with third-party cameras.
Main features- Algorithm for make and model recognition on CPS 6.0
- Valid for one viewing point
- Also compatible with non-Selea cameras