AikomGo September Promo: free shipping
Valid until 30 September 2026
Consult over 2,000 available products and purchase the most suitable solutions for your next projects, without transport costs.
The discount is automatically applied at checkout, without the need for promotional codes.
The promo is valid only for shipment to Italy.
Portable dipole antenna 215-230 MHz TNC
The Amphenol Procom EFD 200R/h-TNC(m) antenna is designed for VHF applications in the 215-230 MHz range. It is a portable, end-fed, ground-plane-independent 1/2 dipole designed for high performance in professional mobile environments.
This rigid (h) version ensures mechanical robustness with resistant materials such as stainless steel and chrome-plated brass. Gain is approximately 3 dB over a traditional 1/4 whip antenna, with VSWR less than 1.3:1 at resonance and a bandwidth of 15 MHz or more. The connector is a male TNC type.
Key Features- Operating Frequency: 215-230 MHz
- Type: Portable 1/2 End-Fed Dipole
- Gain: approximately +3 dB over a 1/4 whip
- VSWR: < 1.3:1 at resonance frequency
- Bandwidth: ‰¥ 15 MHz (VSWR ‰¤ 2:1)
- Polarization: Vertical
- Impedance: 50 ohms
- Maximum Power: 25 W
- Connector: TNC male
- Materials: stainless steel and chrome-plated brass
- Height: approx. 1300 mm
- Weight: approx. 0.15 kg
Portable dipole antenna 185 - 200 MHz TNC
The Amphenol-Procom EFD200R/l-TNC(m) antenna is a 1/2 end-fed dipole specifically designed to operate in the VHF band from 150 to 215MHz. Thanks to its ground-plane independent design, it is perfect for use with portable radios, ensuring high performance even in mobile installations.
Compared to a 1/4 whip, it offers a gain of approximately 3dB, with VSWR <1.3:1 in the resonance range and a bandwidth ‰¥15MHz. The radiator is made of stainless steel and chrome-plated brass for strength and elasticity, while maintaining a low weight (~0.15kg). It features a male TNC connector compatible with many portable devices.
Main Features- Operating Frequency: 150-215MHz
- Type: 1/2 end-fed portable dipole
- Gain: approx. 3dB vs. 1/4 whip
- Polarization: vertical
- VSWR: <1.3:1 at resonance
- Bandwidth: ‰¥15MHz (VSWR ‰¤2.0)
- Impedance: 50?
- Maximum Power: 25W
- Connection: TNC male
- Materials: stainless steel, chrome-plated brass
- Height: approx. 1300mm
- Weight: approx. 0.15kg
Portable dipole antenna 200 - 215 MHz TNC
The Amphenol-Procom EFD200R/m-TNC(m) antenna is a 1/2 end-fed dipole designed for the VHF band from 150 to 215 MHz, perfect for professional use on portable radios. Thanks to its ground-independent design, it does not require a counter-ground and can be quickly installed on mobile transceivers.
Compared to a 1/4 whip, it offers a gain of approximately 3 dB, with a VSWR <1.3:1 at the resonant frequency and a bandwidth ‰¥15 MHz (VSWR ‰¤2:1). The radiator is made of stainless steel and chrome-plated brass, ensuring robustness and durability over time, with low weight. The male TNC connector ensures compatibility with many portable radios.
Main Features- Operating Frequency: 150-215MHz
- Type: 1/2 end-fed portable dipole
- Gain: approx. 3dB vs. 1/4 whip
- Polarization: vertical
- VSWR: <1.3:1 at resonance
- Bandwidth: ‰¥15MHz (VSWR ‰¤2:1)
- Impedance: 50?
- Maximum Power: 25W
- Connection: TNC male
- Materials: stainless steel, chrome-plated brass
- Height: approx. 1300mm
- Weight: approx. 0.15kg
Portable 160MHz TNC Dipole Antenna
The Amphenol-Procom EFD2R/h-TNC antenna is a 1/2 end-fed dipole designed for the VHF band 160-175MHz. Its ground-plane-independent design makes it ideal for portable equipment, ensuring easy installation and high performance in professional environments.
It offers approximately 3dB gain over a 1/4 whip, with a VSWR <1.3:1 at the resonant frequency and a bandwidth of ‰¥15MHz at a VSWR ‰¤2.0. The radiator is constructed of stainless steel and black chrome-plated brass, ensuring robustness and lightness. The male TNC connector ensures compatibility with standard portable radios.
Main Features- Operating Frequency: 160-175MHz
- Type: 1/2 end-fed portable dipole
- Gain: approximately 3dB vs. 1/4 whip (0dBd / 2.15dBi)
- Polarization: vertical
- VSWR: <1.3:1
- Bandwidth: ‰¥15MHz (at VSWR ‰¤2.0)
- Impedance: 50?
- Maximum Power: 25W
- Connection: TNC male
- Materials: stainless steel, black chrome-plated brass
- Height: approximately 960mm
- Weight: about 0.1kg
iZero ANPR-OCR Box Camera
OCR Global Shutter da 2Mpx e lente fuoco sso da 3.6 mm per una lettura a distanze da 1,2 a 3,5
mt. Provvista d'interfaccia Wiegand di serie e alimentazione standard 12 Vdc e POE 802.3af
Ekahau Connect Subscription License 1 year
The Ekahau Connect Subscription 1-Year license combines the main software tools and services included in the annual offer into a single solution. Ekahau includes a 1-year subscription to Ekahau Survey for iPad, Ekahau Capture, Ekahau Cloud, and Ekahau Connect Training, as well as 1 year of Maintenance and Support for Ekahau Pro software.
This license provides continuous access to the platform tools and related included services for the entire annual term, simplifying the management of tasks and software support.
Key Features
- 1-year license.
- Includes Ekahau Survey for iPad.
- Includes Ekahau Capture.
- Includes Ekahau Cloud.
- Includes Ekahau Connect Training.
- Includes 1 year of Maintenance and Support for Ekahau Pro software.
Sidekick 2 Tri-Band Wi-Fi Analyzer
The Sidekick 2 tri-band Wi-Fi analysis device is an Ekahau solution for professional site surveys, spectrum analysis, and performance testing on 2.4, 5, and 6 GHz wireless networks. With 4 enterprise-grade tri-band Wi-Fi radios, it allows you to collect more data in less time and obtain reliable, repeatable measurements for network validation.
Ekahau designed the Sidekick 2 to deliver high speed and accuracy for signal and spectrum analysis tasks, supporting Wi-Fi 4, Wi-Fi 5, Wi-Fi 6, Wi-Fi 6E, Wi-Fi 7, and legacy 802.11a/b/g networks. The device integrates 9 3D wideband antennas, a spectrum analyzer with up to 50 sweeps per second, USB-C connectivity, silent active cooling and a battery that lasts all workday.
Compatible with Android, Windows, iOS and macOS, the device helps you check the quality of wireless coverage, identify environmental changes that can affect performance and correct the positioning of access points right from the first installation, with advantages in terms of time, reliability and operational continuity.
Main features
- Device for Wi-Fi site survey and spectrum analysis on 2.4 5 and 6 GHz
- 4 high-performance tri-band Wi-Fi radios
- 9 integrated 3D wideband antennas for omnidirectional accuracy
- Support for Wi-Fi 4, Wi-Fi 5, Wi-Fi 6, Wi-Fi 6E, Wi-Fi 7 and 802.11a/b/g
- Configurable scan channels
- Support for all regulatory domains
- Spectrum analyzer up to 50 sweeps per second
- USB-C connectivity
- All-day battery life
- Quiet active cooling
- Compatible with Android, Windows, iOS, and macOS
- Wi-Fi amplitude range from -20 to -92 dBm
AI Pro 2.4/5/6 GHz Wi-Fi Design Software
2.4/5/6 GHz Wi-Fi Design Software AI Pro is an Ekahau solution for IT professionals managing business-critical Wi-Fi network design and deployment projects. It allows you to create AI-assisted predictive designs for access point placement, simulate network upgrades in real-world environments, inspect collected and live survey data, and generate customized network health reports.
Ekahau supports wireless network design for Wi-Fi 6, Wi-Fi 6E, Wi-Fi 7, and 802.11a/b/g/n/ac, with support for the 2.4 GHz, 5 GHz, and 6 GHz bands. The software includes a database of thousands of access point and antenna patterns, 26 heatmap visualizations, real-time frequency monitoring, and tools to identify coverage, interference, Wi-Fi equipment failures, configuration errors, roaming, and capacity issues.
Advanced features include simulation of channel configuration changes, access point replacement scenarios, material reflection and diffraction analysis, and signal attenuation, and an intuitive working interface with light or dark mode to switch between Design, Inspect, Survey and Live. Requires Ekahau Connect Subscription (product code: EKA-ECS-1YR).
Key Features
- Software for designing and deploying business-critical Wi-Fi networks.
- Support for 2.4 GHz, 5 GHz, and 6 GHz bands.
- Compatible with Wi-Fi 6, Wi-Fi 6E, Wi-Fi 7, and 802.11a/b/g/n/ac.
- AI-assisted predictive design for access point placement.
- Simulation of network upgrades and scenarios with different AP models.
- Inspection of collected and live survey data.
- Generation of customized network health reports.
- Database of thousands of access point and antenna patterns.
- 26 heatmap visualizations for network health analysis. Network.
- Real-time frequency monitoring.
- Tools for troubleshooting coverage, interference, roaming, capacity, and configuration.
- Analysis of signal strength, SNR, secondary and tertiary coverage, noise, channel interference, data rate, overlap, RTT, packet loss, network health, and capacity.
- Visual identification of access points and non-Wi-Fi interfering devices.
- Support for analysis of attenuation, reflection, and diffraction of materials.
- Intuitive interface with light or dark mode.
- Supported operating systems: Windows 10 64-bit, Windows 11 64-bit, and macOS 11 or later.
- Minimum requirements: 1.5 GHz processor, 8 GB RAM, and 1 GB of disk space.
- Supported files: DWG, DXF, PDF, SVG, BMP, GIF, JPEG, and PNG.
- Some features require the Sidekick 2 spectrum analyzer.
16mm PTT Earpiece Microphone
The 16 mm PTT headset microphone is a communications accessory that combines a clip-on microphone and a headset with PTT control in a compact and convenient package. Kenwood describes this model as a new, more durable unit with reinforced cables and a gold-plated twin jack connector, designed for reliable use in field applications.
Specifications include a maximum input of 200 mW at 1 kHz, a microphone impedance of 1500 ohms, a microphone sensitivity of -42 dB, a headset sound pressure level of 105 dB, and a speaker impedance of 72 ohms. The cable measures 750 mm from the connector to the microphone and 500 mm from the microphone to the earpiece, with an earpiece diameter of 16 mm and a total weight of 27 g.
Key Features- Clip-on microphone and earpiece with PTT.
- New, more durable unit with reinforced cables.
- Gold-plated twin-jack connector.
- Maximum input of 200 mW at 1 kHz.
- Microphone impedance of 1500 Ohm.
- Microphone sensitivity of -42 dB.
- Earpiece sound pressure level of 105 dB.
- Speaker impedance of 72 Ohm.
- Cable length of 750 mm from the connector to the microphone and 500 mm from the microphone to the earpiece.
- Earpiece diameter of 16 mm.
- Weight of 27 g.
Screw cover cap for SL1600 radio
The Motorola EN000037A01 screw cover is designed for SL1600 portable radios. It protects the body screws from dirt, dust, and moisture, helping to maintain the integrity and original appearance of the device. Made of resistant materials, it ensures a perfect fit and long-lasting durability.
It is an original Motorola component, recommended for maintenance, repair, or replacement on professional radios, guaranteeing full compatibility and build quality.
Main features- Original Motorola replacement part
- Compatible with SL1600 portable radios
- Protects screws from dust and moisture
- Resistant and long-lasting material
- Easy to install and a perfect fit