AikomGo September Promo: free shipping

The Motorola G-type headset is designed for comfort and high performance in radio communications. Featuring a mono-pin connector, it connects easily and offers stability during use. The clip with integrated PTT button allows you to transmit without removing the radio, maintaining convenience and hands-freeness.

The 15 mm speaker with 10 mW output power and up to 105 dB sound pressure level ensures clear and defined audio. The built-in condenser microphone has a sensitivity of -38 dB and an impedance of 2.2 kΩ, for clear communications even in noisy environments. Thanks to its ergonomic and lightweight design, it can be worn for extended periods without fatigue.Main Features

• Ergonomic and comfortable G-type design
• Mono-pin connector
• Clip with integrated PTT button
• 15 mm speaker, 10 mW output power
• SPL: 105 dB, 32 Ω impedance
• Condenser microphone with sensitivity -38 dB
• Microphone impedance: 2.2 kΩ
• Ideal for professional and everyday communications

Pelco's LC single-mode SFP FSFP receiver is a small form-factor, pluggable module designed for professional Ethernet data transmission applications. It supports optical interfaces and ensures full integration with Pelco unmanaged switches and media converters, ensuring stable performance even in harsh environmental conditions.

Compliant with MSA and IEEE 802.3 standards, this FSFP module offers interoperability and long-term reliability. Its industrial-strength construction and wide operating temperature range make it suitable for critical infrastructure installations such as transportation, airports, and university campuses, while maintaining Pelco's manufacturer's warranty coverage when used with compatible products. Key Features

• FSFP SFP module for Ethernet data transmission
• Single-mode fiber support
• LC connectors and SFP interface
• Compliant with MSA and IEEE 802.3 standards
• Operating temperature range of -40 to 75°C
• Modular form factor for integration into Pelco systems

The FSP2/h-GP300 portable whip antenna is perfect for professional use with Motorola GP and MX radios in the 155-175MHz VHF band. The highly flexible, StraightFlex-coated steel wire combines strength and light weight in a sleek design. Each antenna is factory tuned and tested to ensure minimum SWR and reliable performance up to 100W, with a nominal impedance of 50? and 0dB gain.

• Operating Band: 155-175MHz (VHF band)
• Full-size 1/4 whip antenna, vertical monopole
• Impedance: 50?; Gain: 0dB
• Minimum bandwidth ‰¥20MHz with SWR ‰¤2.5
• SWR <2 when mounted directly on the radio
• Maximum power: 100W
• Materials: StraightFlex polyethylene-coated flexible steel wire, durable plastic body and Cu-nite brass
• Overall length approximately 480mm; weight approximately 35g
• 1/4-32UNEF connector compatible with Motorola portable radios

The FSP70/1/4/h SMA(m) from Amphenol-Procom is a portable antenna from the StraightFlex series designed for the 420-470MHz UHF band. Its flexible and durable design with polyethylene-coated steel wire makes it ideal for heavy-duty mobile use. The male SMA connector ensures wide compatibility, while factory calibration ensures optimal RF efficiency and low VSWR. Perfect for those looking for a compact, robust, and high-performance antenna for professional use.Main Features

• UHF Band 420-470MHz
• Gain 0dB vs. 1/4 whip
• VSWR <2:1, impedance 50?
• Maximum power 100W
• SMA Male Connection
• Polyethylene-coated steel wire element
• Black color, height approximately 223.5mm
• Weight ~0.025kg

The StraightFlex 70cm SMA 400-450MHz portable antenna is designed for professional use with portable UHF equipment. It is a 1/4 whip antenna, constructed with StraightFlex polyethylene-coated steel wire for light weight, strength, and a discreet aesthetic. The version with a male SMA connector is optimized for the 400-450MHz range and comes pre-tuned and tested to guarantee a VSWR <2.0 out of the box.

• Operating Band: 400-450MHz (70cm band)
• Full-size 1/4 whip antenna, vertical polarization
• Impedance 50?, gain 0dB
• VSWR < 2.0 mounted directly on the radio
• Useful band ‰¥50MHz (VSWR ‰¤2.0)
• Maximum supported power: 100W
• Connector: SMA male
• Materials: flexible steel wire coated with polyethylene, black-chrome brass base
• Length approx. 223.5mm, weight approx. 25g

This portable 1/2 end-fed dipole antenna is designed for the 70cm UHF band (430-460MHz) and guarantees high performance in professional environments. Thanks to the StraightFlex coated steel structure and the black chrome-plated brass body, it offers flexibility and resistance to intensive use.

The gain increased by approximately 3dB compared to a traditional 1/4 ensures better signal transmission and reception. The factory calibration guarantees a VSWR <1.3:1 at the resonant frequency. The female FME connector allows use with a wide range of BFME adapters, making the antenna compatible with many portable devices.

• Operating Frequency: 430-460MHz (70cm band)
• Type: 1/2 end-fed portable dipole
• Gain: 0dBd / 2.5dBi (~3dB vs. 1/4)
• Polarization: vertical
• VSWR: <1.3:1 at resonance
• Impedance: 50?
• Maximum Power: 25W
• Connection: FME female (BFME adapters optional)
• Materials: Coated steel, black chromed brass
• Height: approx. 340mm; Weight: about 50g
• Bandwidth: ‰¤30MHz with VSWR ‰¤2.5

The Amphenol-Procom FSP 70/465 FME antenna is designed for portable radios operating in the 70cm band (380 470MHz), offering 2.5dBi gain thanks to its 1/2 design. The flexible polyethylene-coated steel radiator ensures mechanical strength and flexibility, maintaining performance even in dynamic environments. The FME connection system allows the use of interchangeable BFME adapters (UHF, BNC, TNC, N, EBNC, ETNC), which must be ordered separately. Supplied already calibrated, it is ideal for professional applications on portable devices.

• Bandwidth 70cm (380 470MHz)
• Gain 0dBd / 2.5dBi
• Impedance 50?, vertical polarization
• VSWR <1.3:1 at the resonant frequency
• Bandwidth ‰¤30MHz with SWR ‰¤2.5:1
• Maximum power 25W
• Steel whip with self-reinforcing polyethylene coating
• Female FME connector with interchangeable BFME system
• Height approx. 340mm, weight approx. 50g

The Motorola Solutions FTN6083A Dash Mount Kit is the perfect accessory for installing Motorola Solutions mobile radios, such as the XTL Series, in your vehicle. This kit is designed to provide a smooth and secure integration into your dashboard, providing a stable and easily accessible platform for your radio while you travel.

Made from high-quality, rugged materials, the Motorola Solutions FTN6083A Dash Mount Kit ensures your radio stays securely in place, even on rough roads or during sudden maneuvers. Its construction is designed to withstand daily wear and tear and ensure a long life over time.

Key Features

• Designed for perfect integration into the vehicle dashboard.
• Compatible with Motorola Solutions mobile radios: DM1400, DM1600, DM2600, TLK 150
• Rugged construction for stability and durability.
• Easy and safe installation.
• Ideal for keeping the radio accessible and safe while driving.

The GA 2/h GP 300 antenna from Amphenol Procom is a full-size 1/4 whip for professional use in the 2-meter band (155-175 MHz). Constructed of a steel wire core encased in durable thermoplastic rubber, it is designed to withstand shock and harsh environmental conditions. Supplied already calibrated and tested, it ensures a VSWR <2:1 and a gain equivalent to 0dB compared to a standard whip, making it ideal for portable radios such as the Motorola GP series.Main Features

• Gain 0dB compared to a 1/4 whip
• Vertical polarization, 50 impedance
• VSWR <2:1 when mounted on a radio
• Bandwidth 2m (155-175MHz for the GP300model)
• Maximum input power 100W
• Connection 1/4"-32 UNEF
• Construction: Thermoplastic rubber-coated steel wire, chrome-plated brass elements
• Height approx. 450mm, weight ~60g

The TELL 4G Gate Control PRO 1000 DIN rail gate opener module is a professional module for controlling electric gates, barriers, garage doors, and other relay-controlled devices via a mobile app or call. Designed for DIN rail mounting, it supports up to 1000 users and integrates advanced access management tools, such as configurable permissions, entry periods, scheduled controls, and event logging.

The device features 4 configurable inputs and 2 relay outputs for controlling one or two gates, including partial and full opening functions. TELL also includes notifications via Push, SMS, call or email, monitoring of the open or closed status of the gate via limit switches, programming via USB-C or IP and API support for integration with third-party software.

Main features

• 4G gate opener module for electric gates, barriers and garage doors.
• DIN rail mounting.
• Control via mobile app or call.
• Support for up to 1000 users.
• 4 configurable inputs.
• 2 relay outputs NO, NC, COM.
• Management of one or two gates with partial or total opening.
• Configurable user permissions and access periods.
• Scheduled controls.
• Log of the last 1000 events with user identification and control time.
• Notifications via Push, SMS, call or Email.
• Display of the open or closed status of the gate in the app with the use of limit switches.
• Support for images from IP cameras in the mobile app.
• Programming via USB-C or IP.
• 4G, VoLTE, 2G and GSM communication.
• Power supply 12-30 V DC or 12-24 V AC.
• Operating temperature from -20 °C to +70 °C.
• API support for integration with third-party software.

The Amphenol-Procom GlassFix 1/2 138-175MHz antenna is designed for glass mounting without drilling, making it ideal for professional vehicles where a non-invasive installation is required. The 1/2 structure guarantees good radio performance equivalent to that of roof-mounted antennas.

Equipped with an adhesive base, FastCabling system with FME connector (cable not included), resonance calibration screw, and removable whip for easy vehicle washing. The 180° swivel joint allows for flexibility during use. Compatible with glass thickness 2.5-7mm, requires a clear mounting area of at least 52x47mm.

• Operating Frequency: 138-175MHz
• Type: 1/2 lambda antenna for glass mounting
• Gain: 0dB
• Impedance: 50?; VSWR <1.3 (at resonance)
• Bandwidth: >6MHz (VSWR <1.5)
• Maximum Power: 25W
• Mounting: adhesive on glass without drilling
• Materials: stainless steel and black chromed brass whip; plastic base
• Dimensions: height ~92cm; Weight ~0.09kg
• Connection: FME female (FastCabling)
• Other features: removable whip, 180° swivel joint, calibration screw
• Glass compatibility: thickness 2.5-7mm; area 52x47mm

The Amphenol-Procom GF405/H antenna is a short 1/2 mobile antenna for the 450MHz band, designed for mounting on windows with the GlassFix system: thanks to the internal adaptation unit and double adhesion, it ensures quick and stable attachment without drilling the vehicle.

It offers neutral gain (0dB), 450MHz band coverage with VSWR ‰¤1.5:1 and bandwidth ‰¥15MHz. It has a maximum input power of 25W, with a removable stainless steel and chrome-plated brass radiator. Compact (about 240mm) and lightweight (‰ˆ0.03kg), it is easily removable and leaves no traces after use.

• Operating frequency: 450MHz (GF405/H model)
• Type: 1/2 GlassFix mobile antenna on car glass
• Gain: 0dB (EIA RS 329 1)
• VSWR: ‰¤1.5:1 @ resonance
• Bandwidth: ‰¥15MHz
• Impedance: 50?
• Max power: 25W
• Radiator materials: stainless steel and chromed brass
• Mounting: car glass with double adhesive (free area 52x47mm)
• Cable/Connections: FME (cable not included)
• Dimensions: ~240mm length
• Weight: ~0.03kg
• Additional Features: Removable shaft, no damage to the glass when removed