AikomGo September Promo: free shipping

The Panorama Antennas LPBE panel mount antenna is a rugged and compact solution for IoT and M2M applications in the 868 MHz band. Thanks to its low-profile design, it offers a discreet and durable installation, suitable for exposed or industrial environments. The integrated radiator is designed to optimize wireless signal reception, ensuring consistent performance even in harsh environments. The antenna features a male SMA connector and a 2-meter cable, simplifying integration with modems, gateways, or IoT network devices. The vandal-resistant and weatherproof structure ensures long life and operational stability.

Main Features

• Operating frequency 868 MHz
• Low profile design for discreet installation
• Rugged and shock-resistant structure
• Suitable for IoT and M2M applications
• Panel mount
• 2 m cable with SMA male connector
• Weatherproof and vandal-resistant
• Ideal for fixed indoor or outdoor installations

The LS 430 power supply from MICROSET is a high-performance, adjustable switching device designed for professional use in laboratories, industry, and telecommunications. It provides an adjustable output from 4 to 30 V DC with a maximum current of 30 A, ensuring 24-hour service continuity. High efficiency of over 90% and low ripple ensure stability and reliability even in the most critical applications. The integrated digital display allows immediate reading of voltage and current. The magnetic levitation fan, active above 20 A, maintains quiet and safe operation. The power supply includes protections against overload, short circuit, overvoltage and overtemperature.

Main features

• Adjustable output voltage: 4-30 V DC
• Maximum output current: 30 A
• Typical ripple: 40 mV RMS
• High efficiency >90%
• 24-hour continuous operation
• 3-digit V+A digital display
• Magnetic levitation fan with speed control
• Protections: overload, short circuit, overvoltage, overtemperature
• Dimensions: 190 - 280 - 110 mm
• Weight: 3 kg

The LT 100S power supply from MICROSET is a linear technology laboratory power supply designed for professional applications requiring precision and reliability. The 0 to 40 V DC adjustable output supplies up to 20 A, with a typical ripple of only 18 mV. It features separate voltage adjustments (coarse and fine) and pre-selectable maximum current, as well as a quick load disconnect system to prevent unwanted on-off cycling. The digital display allows accurate voltage and current measurement, with a resolution of 100 mV / 100 mA and an accuracy of 2.5% ± 1 digit. The system includes protections against overload, short circuit, overtemperature and R.F. fields. external, with load- and temperature-controlled fan cooling.

Main features

• Adjustable output voltage: 0-40 V DC
• Maximum output current: 20 A
• Typical ripple: 18 mV RMS
• Digital V-A instrumentation with 100 mV / 100 mA resolution
• Adjustments: coarse/fine voltage, preselectable maximum current
• Fast load shedding function
• Protection against overload, short circuit, overtemperature and R.F. fields
• High efficiency and continuous duty (90% duty cycle)
• Ventilation with speed-controlled fan
• Dimensions: 150 - 300 - 110 mm
• Weight: 3 kg

The Microset 0-15 V 0-25 A DC power supply is part of a compact, professional, highly reliable line designed for applications in electronics laboratories, research and development, quality testing, certification, and physical and chemical laboratories. It ensures low ripple, high stability, and continuous operation to meet the most advanced needs.

Thanks to its high-resolution dual wide and fine voltage regulation and output current pre-selection, it allows precise control of operating parameters. It features rapid load interruption via standby, MOS power technology, controlled emissions, and a variable-speed fan cooling system based on temperature and load.

Main Features

• 0-15 V DC, 0-25 A output
• Ripple R.M.S. 18 mV typical
• High-resolution dual voltage regulation
• Adjustable and preselectable output current
• Stand-by for temporary load disconnection
• Digital V-A metering with 100 mV / 100 mA resolution, 2.5% accuracy, 1 digit
• Line stability ± 0.1% with ± 10% variation
• Load stability 0-100% ± 0.5% + 100 mV typical
• Protection against overload, short circuit, and RF fields. External and overheating protection
• Cooling with controlled-speed fan
• Power supply 190-240 Vac 50 Hz
• Dimensions 150 x 300 x 110 mm, weight 3 kg

p>The LT 250 power supply from MICROSET is a high-power laboratory power supply, designed to provide high performance and continuity of service. The adjustable 5 to 30 V DC output delivers up to 50 A, with a typical ripple of 50 mV RMS. The integrated digital instrumentation ensures accurate voltage and current measurements, while dedicated adjustments allow precise control of the parameters. Thanks to protections against overload, short circuit, overtemperature and external R.F. fields, it guarantees safety even in harsh conditions. Temperature- and load-controlled ventilation maintains operational stability with 90% duty cycle. Main Features

• Adjustable output voltage: 5-30 V DC
• Maximum output current: 50 A
• Typical ripple: 50 mV RMS
• High-precision digital V-A metering
• Accurate voltage and current regulation
• Protection against overload, short circuit, overtemperature and R.F. fields
• Continuous service with 90% duty cycle
• Forced ventilation with automatic speed control
• Dimensions: 190 - 330 - 125 mm
• Weight: 4.5 kg

The LTS 150 power supply from MICROSET is a regulated switching power supply designed for applications requiring reliability, power, and continuity of service. It provides a 13.5 V DC output with a maximum current of 55 A, maintaining a typical ripple of 60 mV. Its compact and robust structure, combined with an efficient design, makes it suitable for intensive use in telecommunications, industrial environments, and laboratories. The system integrates protections against overload, overtemperature, and short circuit, while forced ventilation with automatic speed control ensures stable and silent operation. With an efficiency of over 90% and continuous duty, it represents an ideal solution for long-lasting professional power supplies.

Main features

• Output voltage: 13.5 V DC
• Maximum output current: 55 A
• Typical ripple: 60 mV RMS
• High efficiency >90%
• Continuous duty 24 hours a day
• Protections: overload, short circuit, overtemperature
• Forced ventilation with speed control
• Dimensions: 185 - 260 - 100 mm
• Weight: 2.5 kg

The LTS 230 power supply from MICROSET is a professional, stabilized switching solution designed for applications requiring continuity and reliability. It delivers a 24 V DC output with a maximum current of 30 A, maintaining a typical ripple of 40 mV. Its compact and robust structure, combined with high-efficiency technology, makes it suitable for telecommunications, industrial, and laboratory environments. Integrated overload, overtemperature, and short-circuit protection ensure safety and reliability, while forced ventilation with speed control maintains stable and silent operation. With efficiency over 90% and continuous duty, it represents a safe and long-lasting power source.

Main features

• Output voltage: 24 V DC
• Maximum output current: 30 A
• Typical ripple: 40 mV RMS
• High efficiency >90%
• Continuous duty 24 hours a day
• Protections: overload, short circuit, overtemperature
• Forced ventilation with speed control
• Dimensions: 185 - 260 - 100 mm
• Weight: 2.7 kg

The M 4840/130 power station from MICROSET is designed to provide reliable, continuous power in critical applications. The stabilized 56 V DC output delivers up to 40 A, with 120-130 Ah professional AGM batteries that guarantee approximately 3 hours of autonomy. Under normal conditions, the switching power supply supplies the loads and recharges the batteries; in the event of a mains failure, the batteries intervene without interruption up to the maximum discharge level, with automatic disconnection to protect their life. Recovery occurs automatically when the mains supply returns.

The system integrates a microprocessor controller that manages the mains and battery status, with local and remote signaling, the possibility of remote battery efficiency testing, and an optional SNMP interface. A multifunction LCD display shows electrical and system parameters, while optical and acoustic alarms signal anomalies. The 19'' IP21 painted steel rack cabinet includes trays to house batteries up to 250 kg, with battery life expandable through additional modules.

Main features

• Stabilized output voltage: 56 V DC
• Maximum output current: 40 A
• Batteries: capacity 120-130 Ah, battery life approximately 3 hours
• Continuous 24-hour service with zero-time intervention
• Microprocessor controller with local and remote signals
• Remote battery efficiency test
• LCD multimeter display V/A/W/Wh/°C
• Alarms for flat, low battery and mains failure
• 19'' IP21 steel rack cabinet with battery trays
• Battery life expandable with additional battery packs

The M 4840/235 power station from MICROSET is a complete solution for providing continuous power in critical applications. It provides a stabilized 56 V DC output with a maximum current of 40 A, supported by a 200-235 Ah AGM battery pack, which guarantees up to 6 hours of autonomy and an available power of 14,000 W. Under normal conditions, the mains supplies the loads and recharges the batteries, while in the event of a mains failure the system immediately switches to battery operation, with automatic disconnection when the maximum permitted discharge level is reached to preserve battery life.

The system integrates a microprocessor controller that constantly manages the status of the mains and batteries, with the possibility of local and remote signals, remote battery efficiency testing and an optional SNMP interface. A multifunction LCD display shows the voltage, current, power and temperature parameters, while optical and audible alarms warn of anomalies. The sturdy 19'' IP21 rack cabinet in painted steel is designed to accommodate battery packs up to 250 kg, with the possibility of extending the autonomy through additional modules.

Main features

• Stabilized output voltage: 56 V DC
• Maximum output current: 40 A
• AGM batteries: capacity 200-235 Ah
• Autonomy up to 6 hours
• Available power: 14,000 W
• Microprocessor controller with continuous monitoring
• Local and remote signals, remote battery test
• LCD multimeter display V/A/W/Wh/°C
• Optical and acoustic alarms for mains and battery anomalies
• 19'' IP21 rack cabinet with battery trays
• 24/7 continuous service and expandable autonomy

The BR1 Mini dual-band LTEA cellular router is a compact solution for reliable professional connectivity in distributed and mobile environments. Peplink integrates a CAT-6 modem for APAC and EMEA regions, dual redundant SIM slots, concurrent dual-band Wi-Fi 5 with 2x2 MIMO, and 3 Gigabit Ethernet ports for integration into enterprise networks.

The device also supports GPS, GPIO, and ignition sensing, making it suitable for scenarios where business continuity and flexible deployment are required. Management can be done via InControl2 and, with PrimeCare or dedicated licenses, features such as Wi-Fi WAN, Hot Failover, Smoothing, Bandwidth Bonding and a higher number of SpeedFusion VPN peers are available.

Key Features

• Integrated CAT-6 cellular modem in the MAX-BR1-MINI-LTEA-B-T-PRM variant for APAC and EMEA
• 1 x 10/100/1000M Ethernet WAN port and 2 x 10/100/1000M Ethernet LAN ports
• Dual redundant SIM with 4FF Nano-SIM support
• Concurrent dual-band 2.4GHz and 5GHz Wi-Fi 5 with 2x2 MIMO
• Wi-Fi WAN and access point support
• 2 x SMA connectors for cellular antenna, 2 x RP-SMA connectors for Wi-Fi antenna and 1 SMA connector for GPS antenna
• Router throughput up to 300 Mbps
• SpeedFusion VPN throughput up to 80 Mbps without encryption and 60 Mbps with 256-bit AES
• Available SpeedFusion features: Hot Failover, Smoothing and Bandwidth Bonding
• Built-in GPIO and ignition sensing
• Power supply via 10V - 30V DC port, AC adapter or 802.3at PoE
• Power consumption 13W nominal and 18W maximum
• Operating temperature -40°C to 65°C
• Dimensions 125.7 x 107 x 35 mm and weight 430 g
• Recommended users 1 to 60
• LTE bands: B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B38, B39, B40, B41, B42, B43, B48, B66, B71
• 3G HSPA+/WCDMA bands: B1, B2, B4, B5, B6, B8, B9, B19

BR1 Mini is a compact cellular router designed to ensure reliable connectivity in multiple professional scenarios. Peplink offers it in the LTE Cat 4 version for APAC and EMEA regions, with an integrated cellular modem and support for LTE bands B1, B3, B5, B7, B8, B20, B38, B40 and B41, as well as WCDMA, HSPA+ and DC-HSPA+ on bands B1, B5 and B8.

The device integrates 1 10/100/1000M Ethernet WAN port, 2 10/100/1000M Ethernet LAN ports and redundant SIM slots for greater operational continuity. Concurrent dual-band 2.4GHz and 5GHz Wi-Fi 5 with 2x2 MIMO supports Wi-Fi WAN and access point modes, while router throughput reaches up to 300Mbps.

Peplink designed the BR1 Mini for professional installations that require flexibility and robustness, thanks also to built-in GPS, GPIO, Ignition Sensing, 802.3at Power over Ethernet support, 13W nominal power consumption and an operating temperature of -40°C to 65°C. With a recommended number of users from 1 to 60, it is suitable for various deployment scenarios.

Key Features

• Cellular router with 1 integrated Cat 4 LTE modem
• APAC and EMEA version
• Supported LTE bands: B1, B3, B5, B7, B8, B20, B38, B40, B41
• Supported 3G bands: WCDMA, HSPA+ and DC-HSPA+ B1, B5, B8
• 1 10/100/1000M Ethernet WAN port
• 2 10/100/1000M Ethernet LAN ports
• Redundant SIM slots
• Concurrent dual-band 2.4 GHz and 5 GHz Wi-Fi 5 with 2x2 MIMO
• Wi-Fi WAN and access point support
• Router throughput up to 300 Mbps
• SpeedFusion VPN throughput up to 80 Mbps without encryption and 60 Mbps with AES 256-bit
• 2 SMA connectors for cellular antennas, 2 RP-SMA connectors for Wi-Fi antennas and 1 SMA connector for GPS antenna
• Power supply 10-30 V DC, 100-240 V AC adapter with 12 V output and PoE 802.3at
• GPIO and Ignition Sensing for integration into specialized installations
• Operating temperature -40 °C to 65 °C
• Consumption of 13 W nominal and 18 W maximum
• Dimensions 125.7 x 107 x 35 mm and weight 430 g
• Recommended number of users from 1 to 60
• Certifications FCC, CE, RoHS, UL 121201 Class I and Division 2, E-Mark, EN 61373, EN 50155, EN 61000

The MAX BR2 dual-modem 3G outdoor router is designed for industrial, emergency, and all heavy-duty applications requiring reliable mobile connectivity even in harsh environments. With Pepwave, this model combines an IP55 waterproof design resistant to dust, vibration, and weather with two embedded 3G modems, offering worldwide coverage and service continuity.

It includes 1 GE WAN port and 2 GE LAN ports, as well as 802.11b/g/n Wi-Fi support up to 300 Mbps in Wi-Fi WAN and/or access point mode. The MAX-BR2-AE-SF-IP55 model integrates SpeedFusion Bonding functionality and also supports InControl cloud management, advanced QoS, VPN functions and security tools for professional networks.

Key Features

• Outdoor 3G router with IP55 waterproof enclosure
• 2 embedded 3G modems for worldwide coverage
• SpeedFusion Bonding functionality
• 1 GE WAN port and 2 GE LAN ports
• Wi-Fi 802.11b/g/n up to 300 Mbps as Wi-Fi WAN and/or AP
• Load balancing with intelligent failover, session persistence and per-service load distribution
• VPN support with PepVPN, site-to-site VPN and IPsec VPN
• AES 256-bit encryption
• Advanced QoS with application prioritization and bandwidth limit
• Security with stateful firewall, DoS prevention, web blocking and web filtering blacklist
• Management via Web Administrative Interface, Command Line Interface and InControl Cloud Management