AikomGo September Promo: free shipping

The 868-870 MHz omnidirectional antenna with N-m connector is designed for ISM, SIGFOX, and LoRa 868 MHz applications requiring uniform coverage and compact installation. In this configuration, Sirio Antenne offers a collinear solution with linear vertical polarization, SWR less than or equal to 1.5, and no calibration required.

The version with N-male connector supports a maximum power of 20 W, integrates short-circuited ground protection, and is suitable for connector mounting. The structure uses chromed brass, galvanized steel, fiberglass and PCB, with an approximate height of 500 mm and an approximate weight of 280 g.

• Collinear type
• Omnidirectional radiation
• Vertical linear polarization
• Frequency band 868-870 MHz with SWR less than or equal to 1.5
• No calibration required
• Supported systems ISM, SIGFOX and LoRa 868 MHz
• Gain of 2.2 dBd and 4.3 dBi
• Maximum power of 20 W CW
• Ground fault protection shorted to ground
• N-male connector
• Cable length 0 cm, not supplied
• Materials: chromed brass, galvanized steel, fiberglass Glass and PCB
• Approximate height 500 mm
• Approximate weight 280 g
• Connector mount

The SCO-868-4 868-870 MHz omnidirectional antenna with cable is a collinear solution designed for applications in ISM, SIGFOX and LoRa 868 MHz systems. Within the Sirio Antenne range, this W/Cable version offers omnidirectional radiation, linear vertical polarization and operation in the 868-870 MHz band with SWR less than or equal to 1.5, without the need for calibration.

The variant identified by the code 2111620.80 corresponds to the SCO-868-4 W/Cable model and is equipped with a 5 m low-loss cable with SMA-male connector. It offers a gain of 4.3 dBi, a maximum power of 20 W, short-circuited ground protection and a structure made of chromed brass, galvanized steel, fiberglass and PCB. The antenna has an approximate height of 500 mm, a weight of 440 g and supports pole, hole or wall mounting.

Main Features

• Marketing name SCO-868-4 W/Cable
• Collinear type with omnidirectional radiation
• Frequency band 868-870 MHz
• SWR less than or equal to 1.5 without calibration required
• Compatible with ISM, SIGFOX and LoRa 868 MHz systems
• Vertical linear polarization
• Gain of 4.3 dBi
• Maximum power of 20 W
• 5 m Low-Loss cable
• SMA-male connector, other type on request
• Short-circuited ground fault protection mass
• Materials: chrome-plated brass, galvanized steel, fiberglass, and PCB
• Approximate height: 500 mm
• Approximate weight: 440 g
• Pole, drilled hole, or wall mounting

The 868-870 MHz omnidirectional antenna with N-f connector is a collinear solution designed for applications in ISM, SIGFOX and LoRa 868 MHz systems. In this Sirio Antenne configuration, the product operates in the 868-870 MHz band with a SWR less than or equal to 1.5 and does not require calibration, simplifying installation and use.

The model with code 2111720.00 corresponds to the SCO-868-6 N-f version and offers omnidirectional radiation, linear vertical polarization and a gain of 4.1 dBd, equal to 6.2 dBi. It supports a maximum power of 20 W, integrates short-circuited ground protection and is made of chromed brass, galvanized steel, fiberglass and PCB.

From a mechanical point of view, this Sirio Antenne antenna has an approximate height of 770 mm, an approximate weight of 330 g, an N-female connector and mounting on a pole, through holes or on a wall.

• Collinear type
• Omnidirectional radiation
• Vertical linear polarization
• Frequency band 868-870 MHz
• SWR less than or equal to 1.5 without calibration required
• ISM, SIGFOX and LoRa systems 868 MHz
• Gain 4.1 dBd equal to 6.2 dBi
• Maximum power 20 W
• Connector N-female
• Approximate height 770 mm
• Approximate weight 330 g
• Pole, drilled hole, or wall mounting

The 868-870 MHz omnidirectional antenna with cable is a collinear solution designed for 868 MHz ISM, SIGFOX and LoRa systems. The model with code 2111720.80 corresponds to the SCO-868-6 W/Cable version, with omnidirectional radiation, linear vertical polarization and 868-870 MHz frequency band with SWR less than or equal to 1.5, without the need for calibration.

Sirio Antenne manufactures this antenna with a 5 m Low-Loss cable and SMA-male connector, with other types available on request. The structure uses chromed brass, galvanized steel, fiberglass and PCB, with a height of approximately 770 mm, weight of approximately 490 g and installation on a pole, through holes or on the wall.

• Collinear type
• Omnidirectional radiation
• Vertical linear polarization
• Frequency band 868-870 MHz
• SWR less than or equal to 1.5 without calibration required
• Compatible with ISM, SIGFOX and LoRa 868 MHz systems
• Gain of 4.1 dBd and 6.2 dBi
• Maximum power of 20 W
• 5 m Low-Loss cable
• SMA-male connector, other type on request
• Ground fault protection with short circuit at mass
• Materials: chrome-plated brass, galvanized steel, fiberglass and PCB
• Height approximately 770 mm
• Weight approximately 490 g
• Pole, drilled hole or wall mounting

The 868-915 MHz omnidirectional antenna with N-f connector is a collinear solution designed for ISM, SIGFOX and LoRa applications in the 868 MHz and 915 MHz bands. Sirio Antenne offers it with omnidirectional radiation, vertical linear polarization and operation in the 868-915 MHz band with SWR less than or equal to 1.5 without calibration required.

This version with N-female connector does not include a cable and supports a maximum power of 20 W. The construction uses anodized aluminum, nickel-plated brass, fiberglass and PCB, with an approximate height of 840 mm, a weight of approximately 460 g and the possibility of mounting on a pole or wall.

• Collinear type
• Omnidirectional radiation
• Vertical linear polarization
• Frequency band 868-915 MHz
• ROS less than or equal to 1.5 with no calibration required
• Supported systems ISM, SIGFOX and LoRa 868 MHz and 915 MHz
• Gain of 3.8 dBd 6 dBi
• Maximum power of 20 W
• N-female connector
• Cable length 0 cm not supplied
• Materials Anodized aluminum, nickel-plated brass, fiberglass and PCB
• Approximate height of 840 mm
• Approximate weight of 460 g
• Mast or wall mounting

The 868-915 MHz omnidirectional antenna with cable from Sirio Antenne is designed for ISM, SIGFOX and LoRa applications in the 868 MHz and 915 MHz bands. The collinear structure with omnidirectional radiation and linear vertical polarization ensures suitable use in contexts requiring uniform coverage, with SWR less than or equal to 1.5 and without the need for calibration.

This version is equipped with 5 m of Low-Loss cable and a male SMA connector. Made of anodized aluminum, nickel-plated brass, fiberglass and PCB, it can be installed on a pole or on a wall, with an indicative height of 840 mm and a weight of approximately 560 g.

• Collinear type
• Omnidirectional radiation
• Vertical linear polarization
• Frequency band 868-915 MHz
• Compatible with ISM, SIGFOX and LoRa systems 868 MHz and 915 MHz
• Gain of 6 dBi
• Maximum power of 20 W CW
• 5 m of Low-Loss cable
• SMA male connector
• Materials: anodized aluminum, nickel-plated brass, fiberglass and PCB
• Mounting on a pole or on a wall
• Approximate height of 840 mm
• Approximate weight: 560 g

The 868-915 MHz omnidirectional antenna with N-f connector from Sirio Antenne is designed for applications on ISM, SIGFOX and LoRa systems in the 868 MHz and 915 MHz bands. It is a model with omnidirectional radiation, linear vertical polarization and a 1/2 lambda structure, designed to operate without the need for calibration in the 868-915 MHz range.

The version associated with the code 2111920.00 corresponds to the SO 868-915-2 N-f model, equipped with an N-female connector and mast mounting. The construction uses anodized aluminum, chrome-plated brass, fiberglass and PCB, with an approximate height of 290 mm and a weight of 235 g. The pole mounting bracket supports a maximum diameter of 60 mm.

• Type 1/2 lambda
• Omnidirectional radiation
• Vertical linear polarization
• Frequency band 868-915 MHz with no calibration required
• Supported systems ISM, SIGFOX and LoRa 868 MHz and 915 MHz
• Gain 0 dBd, 2.15 dBi
• N-female connector
• Pole mounting
• Materials Anodized aluminum, chrome-plated brass, fiberglass and PCB
• Approximate height 290 mm
• Approximate weight 235 g
• Pole mounting bracket with a maximum diameter of 60 mm

The 868-915 MHz omnidirectional antenna with N-m connector from Sirio Antenne is designed for ISM, SIGFOX and LoRa applications in the 868 MHz and 915 MHz bands. It uses a 1/2 lambda configuration with linear vertical polarization and does not require calibration, simplifying use in various installation contexts.

This version with N-male connector is connector-mounted, does not include a cable and is made of anodized aluminum, chrome-plated brass, fiberglass and PCB. The compact design has an approximate height of 290 mm and a weight of approximately 235 g.

• Type 1/2 lambda
• Omnidirectional radiation
• Vertical linear polarization
• Frequency band 868-915 MHz with no calibration required
• Compatible with ISM, SIGFOX and LoRa systems 868 MHz and 915 MHz
• Gain 0 dBd, 2.15 dBi
• N-male connector
• Cable length 0 cm, not supplied
• Connector mounting
• Materials: anodized aluminum, chrome-plated brass, fiberglass and PCB
• Approximate height 290 mm
• Approximate weight 235 g

The 868-915 MHz omnidirectional antenna with cable from Sirio Antenne is designed for ISM, SIGFOX and LoRa applications in the 868-915 MHz bands. The 1/2 lambda configuration with omnidirectional radiation and vertical linear polarization allows for uniform coverage, while the W/Cable version integrates a 5 m low-loss cable with SMA-male connector.

Made of anodized aluminum, chrome-plated brass, fiberglass and PCB, it offers a compact structure with an approximate height of 290 mm and a weight of approximately 335 g. It can be mounted on a pole or on a wall, for greater installation flexibility in different application contexts.

• Type 1/2 lambda
• Omnidirectional radiation
• Vertical linear polarization
• Frequency band 868-915 MHz without calibration required
• Supported systems ISM, SIGFOX and LoRa 868 MHz and 915 MHz
• Gain 0 dBd, 2.15 dBi
• 5 m Low-Loss cable
• SMA-male connector
• Materials: anodized aluminum, chrome-plated brass, fiberglass and PCB
• Approximate height 290 mm
• Approximate weight 335 g
• Mast or wall mounting

The 698-2700 MHz log-periodic antenna from Sirio Antenne is a patented broadband directional solution, designed to cover a wide frequency range without the need for calibration. It supports GSM-R, GSM-900, GSM-1800, 2G-GSM/GPRS/EDGE, 3G-UMTS, 4G-LTE, ISM/SIGFOX/LoRa 868 MHz, ISM/SIGFOX/LoRa 915 MHz, 2.4 GHz Wi-Fi, and DECT systems, making it suitable for multiple application contexts.

The vertical or horizontal linear polarization structure, 9 to 11 dBi gain, 10 W maximum power, 50 cm low-loss cable with SMA male connector, and pole mounting make this product easy to install. Sirio Antenne uses materials such as aluminum, galvanized steel and UV-stabilized thermoplastic for the construction of the antenna body.

• Log periodic type.
• Directional radiation.
• Frequency band 698-2700 MHz without calibration required.
• Vertical or horizontal linear polarization.
• Compatible with GSM-R, GSM-900, GSM-1800, 2G-GSM/GPRS/EDGE, 3G-UMTS, 4G-LTE, ISM/SIGFOX/LoRa 868 MHz, ISM/SIGFOX/LoRa 915 MHz, Wi-Fi 2.4 GHz and DECT.
• Gain from 9 to 11 dBi.
• Maximum power 10 W CW.
• Ground fault protection Shorted to ground.
• 50 cm Low-Loss cable.
• SMA male connector.
• Materials: aluminum, galvanized steel, UV-stabilized thermoplastic.
• Approximate dimensions: 850 x 290 x 30 mm.
• Approximate weight: 770 g.
• Mast mounting.

The 868-870 MHz 10.5 dBi omnidirectional antenna from Sirio Antenne is a collinear solution for applications in the 868-870 MHz band, suitable for ISM, SIGFOX and LoRa 868 MHz systems. The model offers omnidirectional radiation and linear vertical polarization, with SWR less than or equal to 1.3 and no calibration required, for simplified commissioning.

Made of materials such as aluminum, anodized aluminum, nickel-plated brass, stainless steel, fiberglass and PCB, it is designed for pole mounting and uses an N-female connector. The FT-5 bracket is included, while the approximate height is 2590 mm and the weight is approximately 1500 g.

• Collinear type
• Omnidirectional radiation
• Vertical linear polarization
• Frequency band 868 - 870 MHz
• SWR less than or equal to 1.3 without the need for calibration
• Compatible with ISM, SIGFOX and LoRa systems 868 MHz
• Gain 10.5 dBi
• Maximum power 20 W
• N-female connector
• Mast mounting with included FT-5 bracket
• Approximate height 2590 mm
• Approximate weight 1500 g

The 5G directional panel antenna with 30 cm cable is a mini directional panel designed for cellular and wireless applications requiring coverage across a wide frequency range. Sirio Antenne offers this model for the 698-960 MHz and 1710-3800 MHz bands without the need for calibration, supporting various systems and usage scenarios.

The linear vertical polarization, gain up to 12 dBi depending on the frequency, and the 30 cm low-loss cable with SMA male connector make the product suitable for versatile installations. The structure allows both pole and wall mounting, with materials such as galvanized steel, UV-stabilized thermoplastic and PCB.

• Mini panel type with directional radiation.
• Vertical linear polarization.
• Frequency band 698-960 MHz and 1710-3800 MHz without calibration required.
• Compatible with GSM-R, GSM-900, GSM-1800, 2G-GSM/GPRS/EDGE, 3G-UMTS, 4G-LTE, 5G 3.4-3.8 GHz, 5G, ISM/SIGFOX/LoRa 868 MHz, ISM/SIGFOX/LoRa 915 MHz and Wi-Fi 2.4 GHz systems.
• Gain 4-6 dBi at 698-960 MHz, 9-10 dBi at 1710-2170 MHz, 11-12 dBi at 2300-2700 MHz and 11-12 dBi at 3300-3800 MHz.
• Maximum power 35 W at 698-960 MHz, 35 W at 1710-2170 MHz, 25 W at 2300-2700 MHz and 20 W at 3300-3800 MHz.
• 30 cm low-loss cable with SMA male connector.
• Materials: galvanized steel, UV-stabilized thermoplastic and PCB.
• Approximate dimensions: 154 x 134 x 46 mm.
• Approximate weight: 400 g.
• Mast or wall mounting.