AikomGo April Promo: free shipping
Valid until 30 April 2026
The discount is automatically applied at checkout, without the need for promotional codes.
The promotion is applicable on all catalog products on AikomGo.
Magnetic mobile antenna with SMA connector
The magnetic mobile antenna with SMA connector is designed to improve cellular signal reception on mobile devices or in industrial environments. The magnetic base allows for easy installation on metal surfaces, making it ideal for vehicles, fleets, construction sites or temporary locations.
Main Features- Operating Frequencies: 699"868MHz / 1850"2690MHz
- Polarization: linear
- Gain: 1.0dBi
- VSWR: ‰¤3.0
- Impedance: 50Ω
- Cable: RG174, length 3000mm
- Connector: SMA male
- Mounting: magnetic
- Operating temperature: "40°C to +85°C
- Protection rating: IP33
- Weight: approx. 83g
- Compliance: RoHS
Compatible with devices Teltonika RUT and TRB series antennas ensure stable connectivity and reliable performance in dynamic and mobile environments.
Adhesive GNSS antenna with SMA connector
The adhesive GNSS antenna with SMA connector is designed to ensure high accuracy in receiving GPS, GLONASS, BeiDou and Galileo satellite signals. The adhesive mount allows for quick installation on smooth surfaces, ideal for applications on Teltonika devices in mobile and industrial settings.
Main Features- Operating Frequency: 1575"1602MHz
- Polarization: RHCP
- Gain: 2.0dBi
- Axial Ratio: ‰¤3dB
- Antenna VSWR: ‰¤2.0
- Impedance: 50Ω
- LNA Gain: 26±2dB
- Noise Figure: Approx. 1.5dB
- Supply Voltage: 2.2"5.0VDC
- Consumption: 5"15mA
- LNA VSWR: ‰¤2.0
- Cable: RG174, length 3000mm
- Connector: SMA male
- Mounting: adhesive
- Operating temperature: "40°C to +85°C
- Operating humidity: up to 95%
- Compliance: RoHS
Ideal for IoT and industrial applications requiring reliable location, this antenna offers high performance with simple and secure installation.
Compact mobile antenna with SMA connector
The compact mobile antenna with SMA connector is designed to optimize signal reception on Teltonika devices compatible with LTE and 5G networks. Its small size and direct mount make it suitable for discreet installations in mobile, vehicular or industrial environments.
Main Features- Operating Frequencies: 698"960MHz / 1710"2690MHz
- Polarization: Linear (Vertical)
- Gain: 4.0dBi
- VSWR: ‰¤3.0
- Impedance: 50Ω
- Connector: SMA Male
- Operating Temperature: "40°C to +85°C
- Protection Rating: IP33
- Weight: approximately 20g
- Compliance: RoHS
Ideal for IoT or vehicle applications, this antenna ensures stable connectivity and high performance in a minimal footprint.
12V DC power supply for Teltonika devices
The Teltonika Automotive Power Supply is designed to provide reliable power to Teltonika devices in vehicular or industrial environments. With flexible 9 to 30VDC input, it converts the voltage into a stable 12VDC output at 1.0A via 4-pin DC connector, ensuring reliability even in the presence of voltage variations or spikes.
Main Features- Input voltage: 9"30VDC
- Output voltage: 12VDC, max current 1.0A
- Input/Output connector: industrial 4-pin DC
- Internal protection: against reverse polarity, overvoltage and short circuit
- Rugged construction suitable for vehicular environment
- Operating temperature: from "40°C to +85°C
- Certification: RoHS compliant
Perfect for Teltonika devices such as RUT series routers, TRB gateways or TSW switches powered directly from vehicular sources, ensuring stability, safety and protection in harsh environments. dynamic.
Power cable with 4-way screw terminal
The 4-way screw terminal power cable is designed to provide a direct and reliable connection between external power and Teltonika devices. The screw terminal allows for a secure connection without the need for soldering, while the 4-pin, 3mm pitch output connector integrates seamlessly with DC power and I/O ports.
Key Features- Input: 4-way screw terminal
- Output: 4-pin, 3mm pitch connector
- Cable: 4 - 0.129mm² (26 AWG)
- Overall length: approximately 2000mm
- Color coding: 1Red (Power +), 2Black (Ground "), 3Green (Input/output/NC), 4White (Input/output/NC)
- Compliance: RoHS
Compatible with Teltonika devices requiring DC power and direct access to I/O signals, this cable ensures a tidy and versatile installation in industrial and vehicular.
4-pin to barrel power adapter
The 4-pin to barrel adapter allows you to power Teltonika devices equipped with a 4-pin industrial DC connector using a power supply with a typical 5.5x2.1mm barrel socket. It is compact, easy to use and allows for quick integration into compatible routers, gateways and UPSs.
Main Features- Input: 5.5x2.1mm barrel socket
- Output: 4-pin DC connector, 3mm pitch
- Integrated cable: approximately 100mm
- Wire cross-section: 0.2mm² (24AWG)
- Compatibility: Teltonika devices with a 4-pin connector input
- Compliance: RoHS
Suitable for scenarios where you want to use a standard DC barrel power supply with Teltonika routers or accessories that do not directly feature such an input, facilitating more flexible power solutions.
1.5m 4-way open wire power cable
The 4-way open wire power cable is designed for Teltonika devices with a 4-pin DC socket. The open wire input allows for flexible connection to power sources, without pre-defined connectors, using dedicated clamps or terminals. The 4-pin output connector with 3mm pitch ensures direct compatibility with device DC ports.
Main Features- Input: 4-way open wire cables
- Output: 4-pin connector, 3mm pitch
- Cable: 4 - 0.5mm² (20AWG)
- Total length: approximately 1500mm
- Maximum voltage: 300V DC
- Maximum current per contact: 4.5A
- Operating temperature: "20°C to +80°C
- Isolation: Isolation up to 1.5kV
- Compliance: RoHS
Suitable for industrial and IoT applications, this cable allows you to power Teltonika devices such as TSW switches or BAT120 UPSs from non-conventional sources, ensuring versatility and reliability in custom installations.
SMA Cable Extension Antenna 2m
The SMA Cable Extension antenna is an accessory designed to extend the range of Teltonika antennas equipped with SMA connections. Thanks to its female-male connector and 2m long cable, it offers greater freedom of positioning while maintaining signal quality even at high frequencies.
Main Features- Connectors: SMA female on one end, SMA male on the other
- Cable length: approximately 2000mm
- Frequency compatibility: up to 6000MHz
- Maximum VSWR: 1.35
- Impedance: 50Ω
- Attenuation: approximately 3.5dB @ 2700MHz
- Operating temperature: "55°C to +155°C
- Working voltage: 335V max; Withstand voltage: 1000Vrms
- Connector durability: ‰¥500 cycles
- Weight: approx. 50g
- Compliance: RoHS
Perfect for installations where it is necessary to physically separate the antenna from the device, maintaining high radio efficiency over broadband in industrial, vehicular or IoT contexts.
EU 2-pin 130W 50V DC power supply
The 130W 2-pin EU power supply is designed to provide reliable, continuous power to Teltonika devices such as TSW industrial switches. It supports a wide input voltage range (100"240VAC), with 50VDC output up to 2.6A via cord end terminal connectors.
Key Features- Rated input voltage: 100"240VAC (operating range 90"264VAC)
- Input current: 2.5A; Peak inrush up to 50A
- Input frequency: 50/60Hz (47"63Hz)
- Output voltage: 50VDC with ±5% deviation (47.5"52.5VDC)
- Maximum output current: 2.6A
- Output connector: Industrial 2-pin cord end terminal
- Protection: Active short circuit; 4242VDC primary-secondary HIPOT test
- Efficiency standard: DoE Level VI
- MTBF: Approximately 50,000h; Weight: approx. 500g
- Safety/EMC certifications: EN 60335, EN 62233, EN 55014, EN 61000-4 series
- Input connector: EU TypeC plug
- Operating temperature: wide tolerance from domestic to industrial environments
- Regulatory compliance: RoHS
Perfect for powering Teltonika devices such as TSW series switches, this power supply ensures reliable power delivery, built-in protection and certified high-efficiency performance in industrial environments.
EU 2-pin 250W 54VDC power supply
The 250W 2-pin EU power supply is designed to provide reliable, continuous power to high-power Teltonika devices, such as TSW industrial switches. It supports a wide input voltage range of 100"240VAC with overvoltage and short-circuit protection. The output is stable at 54VDC with a maximum current of 4.62A, via cord end terminals.
Main Features- Input: 100"240VAC (operating range 90"264VAC), 50/60Hz
- Input current: 3.9A; peak inrush up to 60A
- Output: 54VDC (±5%), max current 4.62A
- Connectors: 2-pin industrial cord end terminal
- Built-in protection: short circuit and primary-secondary HIPOT test at 1500VAC
- Certifications: IEC62368-1 (CB Scheme), EMC compliance according to EN standards
- Weight: approximately 1080g
- Efficiency: compliant with DoE Level VI
- Certification compliance: RoHS, EMC
Ideal for Teltonika devices that require stable and powerful power, this power supply guarantees certifiable performance and built-in protection in industrial environments and mission-critical networks.
EU 24W 12V DC TypeC power supply
The 24W EU power supply is designed to provide stable and safe power to Teltonika devices such as routers and UPSs. It supports a wide input voltage range from 100 to 240VAC and converts to 12VDC output at a maximum of 2A via a 4-pin, 3mm pitch industrial connector.
Main Features- Input voltage: 100"240VAC (operating range 90"264VAC, 50/60Hz)
- Input current: approximately 0.8A, inrush up to 60A
- Output voltage: 12VDC (±5%), max. current 2A
- Output connector: 4-pin, 3mm pitch
- Input connector: interchangeable EU TypeC plug
- Protection: integrated short circuit and dielectric test (HIPOT) at 4000VDC between primary and secondary
- Efficiency: compliant with DoE standards LevelVI
- MTBF: approximately 30,000 hours; weight: approximately 115g
- Certifications: IEC62368-1, EMC compliance according to EN 55032 Class B and EN 55024; energy efficiency EN 50563 and 50564
Perfect for powering Teltonika devices in IoT or industrial settings, this power supply guarantees reliable 12VDC delivery, high protection and compliance with the most stringent energy standards.
EU 2-pin 9W 9VDC power supply
The 9W 2-pin EU power supply is designed for Teltonika devices with 2-pin cord end input, such as RUT and DAP series routers. It accepts input voltage from 100 to 240VAC (range 90"264VAC), 50/60Hz, with input current of 0.45A and peak inrush current of up to 60A. The output provides 9VDC at 1A (range 8.55"9.45VDC), with short-circuit protection and dielectric test (HIPOT) of 4000VDC between primary and secondary.
Main Features- Input: 100"240VAC (90"264VAC), 50/60Hz;
- Input current: 0.45A; inrush max 60A;
- Output: 9VDC ±5%, 1A;
- Output connector: 2-pin cord end;
- Short protection and HIPOT test 4000VDC;
- MTBF approximately 30000h;
- Efficiency: DoE Level VI;
- Certifications: IEC62368-1, EN55032, EN55035;
- Weight: approximately 81g;
- Operating temperature: "10°C to +40°C, storage "20°C to +70°C;
- Compliance: RoHS.
Perfect for powering Teltonika routers with 2-pin DC input in domestic or industrial environments, it offers stable power delivery, integrated protection and certified reliability.