AikomGo September Promo: free shipping
Valid until 30 September 2026
Consult over 2,000 available products and purchase the most suitable solutions for your next projects, without transport costs.
The discount is automatically applied at checkout, without the need for promotional codes.
The promo is valid only for shipment to Italy.
Mini duplexer 6 cavities high VHF band 152 - 175 M
The MPX 2/6 H 4/6 N(f) from Amphenol-Procom is a 6-cavity mini duplexer designed for transmit/receive separation in high-band VHF equipment. Optimized for single-channel use, it can also be configured for multi-channel environments with factory tuning. Thanks to its compact size and high-quality materials, it delivers high RF performance in a small footprint, ideal for mobile installations or in confined spaces.
Main Features- 6 cavities for transmit/receive separation
- High-band VHF, spacing 4-6 MHz
- Optimized for single channel; Multi-channel operation possible with factory tuning.
- Insertion loss ‰¤ 1.4 dB
- Transmitter to receiver noise suppression > 90 dB, transmitter to receiver isolation > 80 dB (at 5-7 MHz spacing)
- Impedance 50 ohms, VSWR < 1.4:1
- Maximum power 25 W
- Connections N female (others on request)
- Dimensions 92 x 154 x 33 mm, weight approximately 0.55 kg
- Operating temperature -30 °C to +60 °C
Mini duplexer 6 cavities 430 470MHz 9 13MHz
The Amphenol-Procom MPX70/6H-9/13-N(f) mini-duplexer is a compact 6-cavity duplex filter designed for duplex radiotelephone in the 430-470MHz UHF band. Intended for systems with single TX/RX frequencies, it provides high signal separation, reducing interference with similar performance even in multi-channel scenarios when factory-tuned.
The painted extruded aluminum enclosure, with a steel chassis and Teflon-insulated coaxial cabling, ensures corrosion resistance. It can handle up to 25W, with insertion loss <1.5dB, excellent port isolation and VSWR <1.4:1. It comes with female N connectors and requires 3.4mm and 5mm mounting holes.
Main Features- Operating Band: 430-470MHz
- Duplex Spacing: 9-13MHz
- Maximum Input Power: 25W
- Insertion Loss: <1.5dB
- TX†’RX Isolation: >90dB; RX†’TX: >80dB @ 5-7MHz
- VSWR: <1.4:1
- Impedance: 50?
- Connections: N female
- Dimensions: 92x154x33mm (excluding connectors)
- Weight: approx. 0.55kg
- Materials: extruded aluminum, steel chassis, teflon wiring
- Operating temperature: -30°C à· +60°C
Mini duplexer 6 cavities UHF band 430 - 470 MHz
The MPX 70/6H-9/13-N(f) from Amphenol-Procom is a 6-cavity mini duplexer optimized for transmit/receive separation in professional UHF systems. Operating in the 430-470 MHz band with 9-13 MHz spacing, it provides high isolation performance and low loss in a compact, rugged package. Suitable for single-channel radios and configurable for multi-channel use via factory tuning, it represents a reliable and versatile solution for installations in mobile or fixed environments.
Main Features- 6 cavities for transmit/receive separation
- UHF band 430-470 MHz, 9-13 MHz spacing
- Optimized for single channel; Multi-channel support with factory tuning
- Insertion loss ‰¤ 1.4 dB
- Transmitter to receiver noise suppression > 85 dB; Transmitter to receiver isolation > 80 dB
- Impedance 50 ohms, VSWR < 1.4:1
- Maximum power 25 W
- N-female connectors (other variants available upon request)
- Dimensions 92 x 154 x 33 mm, weight approximately 0.55 kg
- Operating temperature -30 °C to +60 °C
Mini duplexer 6 cavities UHF band 406 - 440 MHz
The MPX 70/6L-9/13-N(f) from Amphenol-Procom is a 6-cavity mini duplexer optimized for transmit and receive separation in UHF systems operating in the 406-440 MHz band, with 9-13 MHz spacing. Thanks to its compact size and high-quality components, this device offers excellent isolation performance and low loss in mobile or fixed installations. It is ideal for single-channel radios and can be configured for multi-channel use upon request with factory tuning.
Key Features- 6 cavities for transmit/receive separation
- UHF band 406-440 MHz, 9-13 MHz spacing
- Optimized for single channel; Multi-channel support with factory tuning
- Insertion loss ‰¤ 1.4 dB
- Transmitter to receiver noise suppression > 90 dB; Transmitter to receiver isolation > 80 dB
- Impedance 50 ohms, VSWR < 1.4:1
- Maximum power 25 W
- Connections N female (other options on request)
- Dimensions 92 x 154 x 33 mm, weight approximately 0.55 kg
- Operating temperature -30 °C to +60 °C
Stainless steel wall mount for MPX
The Pelco MPXWBA wall mount is constructed of AISI 316L stainless steel with an electropolished finish, which ensures high protection against corrosion and long life even in aggressive environments such as industrial and marine. Designed for MAXIMUS MPX series cameras, it combines robustness and reliability with a load capacity of up to 40 kg.
Thanks to its compatibility with modular accessories such as the MPXCW corner mount adapters and MPXCOL pole mount adapters, this mount guarantees great versatility and adapts to various professional installation configurations.
Main Features- AISI 316L stainless steel wall mount
- Corrosion-resistant electropolished finish
- Length 400 mm
- Maximum load capacity 40 kg
- Compatible with MPXCW (corner) and MPXCOL (pole) accessories
- Designed for MAXIMUS MPX series cameras
12V 2A power supply for cameras
The 12V 2A power supply for cameras is a solution designed to ensure adequate power for compatible video surveillance devices. With its 12V and 2A electrical specifications, it can effectively support the power needs of cameras.
Manufactured by Hikvision, this power supply is suitable for integration into security systems that require 12V 2A electrical specifications, contributing to system continuity.
Main Features
- Output Voltage: 12V
- Output Current: 2A
- Compatible with Hikvision cameras
- Designed for video surveillance systems
WS ProTac XPI over-the-head Bluetooth headphones
The WS ProTac XPI Bluetooth headband headset is a next-generation protective communication solution designed for use in noisy and challenging environments. Part of the 3M Peltor range, this headband model integrates Bluetooth 4.2 with MultiPoint for simultaneous connection to two compatible devices, level-dependent ambient listening technology, and a Push-To-Listen function, useful for face-to-face communication without removing hearing protection.
The noise-cancelling boom microphone is water and dust resistant with an IP 68 rating and supports VOX, while Bluetooth A2DP support allows for selectable streaming in Setup mode. The headset also includes automatic shutdown after 4 hours of non-use, a low battery warning, and a high-visibility yellow color for improved operational recognition.
3M Peltor declares for this headband version an SLC80 attenuation of 32 dB in Class 5 according to AS/NZS 1270:2002, with a clamping force of 12 N and a weight of 372 g including batteries. The product is compatible with the 3M PELTOR WS Ground Mec adapter and the 3M E-A-Rfit validation system, for professional use in demanding contexts.
Main features- Headband.
- Bluetooth 4.2 with MultiPoint.
- Simultaneous connection to two Bluetooth devices.
- Level-dependent function for ambient listening.
- Push-To-Listen function.
- Boom microphone with noise cancellation.
- IP 68 protection rating against water and dust.
- VOX support.
- Bluetooth A2DP support for streaming selectable in Setup mode.
- Automatic shutdown after 4 hours of non-use.
- Low battery warning.
- High-visibility yellow color.
- SLC80 32 dB.
- Class 5.
- Tightening force 12 N.
- Weight with batteries included 372 g.
- Compatible with 3M PELTOR WS Ground Mec adapter.
- Compatible with 3M E-A-Rfit validation system.
- Compliant with AS/NZS 1270:2002.
FLX2 Bluetooth Headset WS ProTac XPI Headband
The FLX2 Bluetooth Headband Headset WS ProTac XPI is a hearing protection and communication solution designed for noisy and demanding environments. Part of the 3M Peltor range, this headband model combines Bluetooth 4.2 with MultiPoint, Bluetooth A2DP support for streaming, and a level-dependent function for ambient listening to improve situational awareness during use.
The noise-canceling microphone is waterproof (IP 68 rating) up to 6 m for 30 minutes and supports VOX. The headset also integrates the FLX2 6-pin Mini XLR connector for adding an external wired source, as well as automatic shutdown after 4 hours of non-use and low battery warning.
3M Peltor declares for this FLX2 headband version an SLC80 attenuation of 32 dB in Class 5 according to AS/NZS 1270:2002, with a clamping force of 12 N and a weight of 372 g including batteries. The high-visibility yellow color, compatibility with the 3M E-A-Rfit Validation System and a product life of up to 5 years, excluding batteries, complete a package suitable for professional applications.
Main Features- Headband.
- Bluetooth 4.2 with MultiPoint.
- Bluetooth A2DP support for streaming.
- Level-dependent function for ambient listening.
- Noise-cancelling microphone.
- IP 68 protection rating for the microphone up to 6 m for 30 min.
- VOX support.
- FLX2 6-pin Mini XLR connector.
- Automatic shutdown after 4 hours of non-use.
- Low battery warning.
- SLC80 32 dB.
- Class 5.
- Echo force tightening torque 12 N.
- Weight with batteries included: 372 g.
- High-visibility yellow color.
- Compatible with 3M E-A-Rfit Validation System.
- Complies with AS/NZS 1270:2002.
- Product life: up to 5 years, excluding batteries.
J11 CH-5 Headband Noise Cancelling Headphones
The J11 CH-5 ear defender with headband is designed to offer protection against dangerous noise levels and very loud sounds. 3M Peltor has developed this series for use in extreme environments, such as engine rooms and other environments with continuous high noise, with a robust construction and easy handling for use and maintenance.
The version with the code MT73H450A GB corresponds to a hearing protector with a J11 wired connection and headband. The product includes a voice microphone, supports communication with external communication devices and has certified attenuation according to EN 352-1:2002 with SNR of 37 dB, H of 37 dB, M of 36 dB and L of 28 dB. Approximate net weight is 498g, with an operating temperature of -20°C to +55°C, storage temperature of -20°C to +55°C and a shelf life of 5 years.
Stated materials include PVC and PA headband, stainless steel headband wire, PVC sheet and PUR foam pad, PUR foam inner liner, ABS cup, ABS and PA voice microphone, metallic bronze external connector and PBT PTT button.
Key Features- CH-5 Ear Muff with Headband
- Protection against dangerous noise levels and very loud sounds
- Designed for extreme environments and areas with continuous high noise
- J11 wired connection
- Built-in voice microphone
- Compatible with communication to external devices
- EN attenuation 352-1:2002 with SNR 37 dB, H 37 dB, M 36 dB, L 28 dB
- Approximate net weight 498 g
- Operating and storage temperature -20 °C to +55 °C
- Shelf life 5 years
Flex ear muffs for CH-5 helmet
The CH-5 Flex helmet-mounted earmuff is designed to provide protection against dangerous noise levels and very loud sounds. 3M Peltor developed this high-attenuation headset for extreme environments, such as engine rooms and other places with continuous high noise, making it robust, easy to use and maintain.
Model MT73H450P3E-77 GB is described as a Flex hearing protector with a helmet attachment. Flex wired connectivity is limited to 82 dB, and the product offers a high SNR value with protection from impact sounds.
Attenuation is certified according to EN 352-3:2002 with an SNR of 36 dB, H of 35 dB, M of 35 dB, and L of 28 dB. Claimed specifications include an approximate net weight of 474g, operating temperature of -20°C to +55°C, storage temperature of -20°C to +55°C, and a shelf life of 5 years. The electrical input level at which the sound pressure is 82 dB(A) is 660 mV.
Declared materials include stainless steel helmet mount wire, PVC sheet and PUR foam earpad, PUR foam inner liner, ABS cup, ABS and PA voice microphone, metallic bronze external connector, PBT PTT button and TPE voice microphone J22.
Key Features- CH-5 Flex Helmet Mount Earmuff
- Protection against dangerous noise levels and very loud sounds
- Designed for extreme environments and high continuous noise
- Flex wired connectivity limited to 82 dB
- Protection against impact sounds
- EN 352-3:2002 attenuation with SNR 36 dB, H 35 dB, M 35 dB, L 28 dB
- Approximate net weight 474 g
- Operating and storage temperature -20 °C to +55 °C
- Shelf life 5 years
- Electrical input level 660 mV at 82 dB(A)
J11 ear muffs for CH-5 helmet
The J11 CH-5 helmet-mounted earmuff is designed to protect against dangerous noise levels and very loud sounds. 3M Peltor offers this high-attenuation headset for extreme environments, such as engine rooms and other environments with continuous high noise, with a robust construction that is easy to use and maintain.
The code MT73H450P3E GB identifies the hearing protector version with J11 connection and helmet attachment. The product is suitable for communication with external devices and offers certified attenuation according to EN 352-3:2002 with SNR of 36 dB, H of 35 dB, M of 35 dB and L of 28 dB.
Declared technical specifications include an approximate net weight of 521 g, an operating temperature of -20 °C to +55 °C, a storage temperature of -20 °C to +55 °C and a shelf life of 5 years. The package includes 1 headset and 1 user instruction.
The materials listed include stainless steel helmet attachment wire, PVC sheet and PUR foam pad, PUR foam inner liner, ABS cup, ABS and PA voice microphone, metallic bronze external connector and PBT PTT button.
Key Features- CH-5 Helmet Attachment Ear Muff
- Protection against dangerous noise and very loud sounds
- J11 PELTOR Connection wired connection
- Support for communication with external devices
- EN 352-3:2002 attenuation with SNR 36 dB, H 35 dB, M 35 dB, L 28 dB
- Designed for extreme environments and high continuous noise
- Approximate net weight of 521 g
- Operating and storage temperature -20 °C to +55 °C
- Shelf life of 5 years
WS LiteCom Plus PMR446 headband headphones
The WS LiteCom Plus PMR446 headband headset from 3M Peltor offers a protective communication solution for noisy environments. The integrated, pre-programmed two-way analog radio facilitates communication, while the level-dependent function enables ambient listening to improve auditory situational awareness.
Multipoint Bluetooth technology allows you to connect one or two external devices for hands-free talking and streaming. The IP68 waterproof noise-canceling microphone, VOX transmission, and Push-to-Listen function support practical use in industrial, construction, and land management applications.
Key Features
- Built-in, pre-programmed 446 MHz PMR analog two-way radio.
- Half-duplex operation with 16 channels.
- 12.5 kHz channel spacing.
- 121 privacy codes, including 38 CTCSS and 83 DCS.
- Output power of 150 mW in Hi mode and 25 mW in Lo mode.
- Outdoor range of up to 2 km, depending on conditions.
- Multipoint Bluetooth for connecting one or two external devices.
- Hands-free conversations and streaming.
- IP68 waterproof noise-canceling dynamic microphone noise.
- Level-dependent function for ambient listening.
- VOX voice-controlled transmission.
- Push-to-Listen function.
- Voice menu with multiple language selection.
- Indicator of busy channel and battery status.
- Slot for connection to external communication devices.
- Automatic switch-off function.
- IP54 protection during use.
- Rechargeable Li-Ion battery, 3.7 V, 2150 mAh, 8 Wh.
- Operating time of up to 21 hours and charging time of approximately 4 hours.
- Operating temperature: -20 °C to 50 °C.
- Weight: approximately 449 g with battery and foam earpads.
Box contents
- One WS headset LiteCom Plus.
- One ACK081B battery.
- One HY83 hygiene kit.
- One HYM1000-100 microphone ribbon.
- Instructions for use.