AikomGo September Promo: free shipping
Valid until 30 September 2026
Consult over 2,000 available products and purchase the most suitable solutions for your next projects, without transport costs.
The discount is automatically applied at checkout, without the need for promotional codes.
The promo is valid only for shipment to Italy.
WS LiteCom Pro III headband headset
The 3M Peltor WS LiteCom Pro III Headband Earmuff is a protective communication solution designed to facilitate work in noisy environments. It integrates a pre-programmed analog and digital two-way radio, multipoint Bluetooth connectivity, a noise-cancelling microphone, and a level-dependent listening function to support communication and situational awareness.
This version with a high-visibility headband is suitable for industrial, construction, and ground handling applications where hands-free communication and hearing protection are required. The IP68 waterproof microphone, rechargeable lithium-ion battery, VOX function and battery status indicator contribute to practical use in daily operations.
Main Features
- Preprogrammed analog and digital DMR two-way radio.
- Multipoint Bluetooth for connection to one or two external devices for hands-free calling and streaming.
- Waterproof microphone with IP68 protection rating.
- Level-dependent function for listening to ambient sounds.
- Noise-canceling microphone.
- Push-to-Listen function.
- VOX voice-activated transmission.
- Busy channel indication, automatic power off and battery status.
- External connection jack for external communication devices.
- Suitable for industrial, construction and ground handling applications.
- Package contents: headset, battery ACK081B, HY83 hygiene kit and instructions for use.
- For model MT73H7A4D10EU GB: SNR 33 dB, H 34 dB, M 32 dB, L 25 dB.
WS LiteCom Pro III neckband headset
The 3M Peltor WS LiteCom Pro III Neckband Headset is a protective communication solution designed for working in noisy environments. It integrates a preprogrammed analog and digital two-way radio, Multipoint Bluetooth, a dynamic noise-cancelling microphone with a level-dependent function for listening to ambient sounds, thus promoting effective communication and improved situational awareness.
The MT73H7B4D10EU GB model is identified in the range as the EU version with a neckband. The radio operates on PMR 446 MHz in half-duplex mode and has 16 analog PMR channels and 16 pre-programmed digital PMR channels, 12.5 kHz channel spacing, analog FM and digital TDMA modulation, 121 privacy codes and 200, 20 and 10 mW ERP output power.
The technical features also include an IP68 waterproof microphone, external connection jack, Push-to-Listen function, VOX voice-controlled transmission, busy channel indication, automatic power off and battery status indication. The package includes ACK081B rechargeable battery, HY83 hygiene kit and instructions for use.
Main features
- Version with WS LiteCom Pro III GB neckband.
- Pre-programmed analog and digital DMR two-way radio.
- PMR 446 MHz frequency.
- Half-duplex operation.
- 16 analog PMR channels and 16 pre-programmed digital PMR channels.
- Multipoint Bluetooth for one or two external devices.
- Dynamic microphone with noise cancellation.
- Waterproof microphone with IP68 protection rating.
- Level-dependent function for ambient listening.
- Voice menu with multiple language selection.
- Push-to-Listen and VOX.
- External jack for external devices communication.
- Typical receiver sensitivity of -120 dBm.
- 121 privacy codes with CTCSS 38 and DCS 83.
- Output power 200, 20, and 10 mW ERP.
- Outdoor range up to 2 km depending on conditions.
- Operating temperature -20 °C to +50 °C.
- Package contents: headset, ACK081B battery, HY83 hygiene kit, and instructions.
CH-3 FLX2 Headband Headphone
The CH-3 FLX2 yellow headband earmuff is designed to improve hearing protection and communication in noisy environments. Within the 3M Peltor range, this model stands out for its newly designed speakers and microphone, as well as its slim design with high-visibility yellow cups.
The headband version corresponds to the model number MT74H52A-110 and is equipped with an external jack for communication with external devices. The noise-cancelling boom microphone supports clear voice transmission even in high-noise environments.
According to laboratory attenuation data compliant with EN352-1:2002, the MT74H52A-110 model offers an SNR value of 31 dB, with H 32 dB, M 29 dB and L 20 dB. 3M Peltor also declares compliance with the requirements for CE marking.
Key features- CH-3 FLX2 yellow headband
- Hearing protection and communication for noisy environments
- Newly designed speaker and microphone
- Slim design with high-visibility yellow color
- External jack for external communication devices
- Noise-cancelling boom microphone
- SNR attenuation of 31 dB
- H values ??32 dB, M 29 dB, L 20 dB
- Compliance with the requirements for CE marking
CH-3 FLX2 Headband Headset with PTT
The 3M Peltor CH-3 FLX2 yellow headband earmuff with PTT is designed to combine hearing protection and clear communication in noisy environments. The technical data sheet identifies the yellow headband variant with integrated PTT of the CH-3 FLX2 series, code MT74H52A-111, developed with a newly designed speaker and microphone.
The product stands out for its bright, high-visibility yellow color, slim cup design, and removable down lead connector that increases flexibility of use. It also integrates an external jack for communication with external devices and a noise-cancelling boom microphone for clear voice transmission in noisy environments.
The specifications reported in the 3M Peltor documentation include a 6-pin FLX2 mini XLR connector, a 46 mm diameter speaker with an impedance of 230 Ohm plus or minus 10%, a frequency response of 100 Hz to 8000 Hz, and IP54 protection. The dynamic noise-cancelling microphone offers 150 Ohm impedance, IP68 protection up to 6 m for 30 minutes and a frequency response of 200 Hz to 7 kHz.
For the MT74H52A-111 model, laboratory attenuation data according to EN352-1:2002 report an SNR of 31 dB, with H values ????of 32 dB, M 29 dB and L 20 dB. 3M Peltor also declares that the product complies with the requirements necessary for the CE marking.
Main features- Headband earmuff with PTT CH-3 FLX2 col. yellow
- Yellow headband variant with integrated PTT
- Newly designed speaker and microphone
- Highly visible bright yellow color
- Slim cup design
- Removable down lead connector for high flexibility
- External jack for communication with external devices
- Noise-cancelling boom microphone for clear speech
- FLX2 mini XLR 6-pin connector
- 46 mm diameter speaker, 230 Ohm plus or minus 10%, IP54
- 150 Ohm dynamic microphone with IP68 protection
- SNR attenuation of 31 dB, H 32 dB, M 29 dB, L 20 dB
- Complies with CE marking requirements
CH-3 FLX2 Neckband Headset
The 3M Peltor CH-3 FLX2 yellow neckband earmuff is designed to take hearing protection and communication in noisy environments to a new level of performance. The technical data sheet describes a newly designed speaker and microphone, a slim cup design, and a bright yellow color for improved visibility.
For the code MT74H52B-110, 3M Peltor identifies the Neckband variant, while the product features a removable down lead connector for high flexibility, an external jack for communication with external devices, and a noise-cancelling boom microphone for clear voice transmission.
The reported specifications include a 6-pin FLX2 mini XLR connector, a 46 mm diameter speaker with an impedance of 230 Ohm plus or minus 10%, a frequency response of 100 Hz to 8000 Hz, and IP54 protection. The dynamic noise-cancelling microphone has an impedance of 150 Ohm, IP68 protection up to 6 m for 30 minutes and a frequency response of 200 Hz to 7 kHz.
The data sheet also reports for the MT74H52B-110 model an SNR attenuation of 28 dB according to EN352-1:2002, with values ??H 31 dB, M 25 dB and L 16 dB. 3M Peltor finally declares the product's conformity to the requirements for CE marking.
Main features- CH-3 FLX2 neckband earmuff, yellow
- Hearing protection and communication for noisy environments
- Newly designed speaker and microphone
- Slim design and bright yellow color for high visibility
- Removable down lead connector for high flexibility
- External jack for communication with external devices
- Noise canceling boom microphone for clear speech
- FLX2 mini XLR 6-pin connector
- 46 mm diameter speaker, 230 Ohm plus or minus 10%, IP54
- 150 Ohm dynamic microphone with IP68 protection
- SNR attenuation of 28 dB, H 31 dB, M 25 dB, L 16 dB
- Compliance with CE marking requirements
CH-3 FLX2 Neckband Headset with PTT
The 3M Peltor CH-3 FLX2 Neckband Headset with PTT is designed to take hearing protection and communication in noisy environments to a new level of performance. The documentation describes a newly designed speaker and microphone, a modern, slim cup design, and a bright yellow color for improved visibility.
For the part number MT74H52B-111, 3M Peltor identifies the CH-3 FLX2 Headset with Built-In PTT, Neckband, Yellow variant. The model with integrated PTT is suitable for environments where it is important to remain connected to portable or fixed systems throughout the day, such as construction, airport, pulp and paper, and other noisy workplaces.
Specifications include a 6-pin FLX2 mini XLR connector, a 46 mm diameter speaker with an impedance of 230 Ohm plus or minus 10%, a frequency response of 100 Hz to 8000 Hz, and IP54 protection. The microphone is a 150 Ohm dynamic noise-cancelling microphone, with IP68 protection up to 6 m for 30 minutes and a frequency response of 200 Hz to 7 kHz.
For the MT74H52B-111 variant, laboratory attenuation data according to EN352-1:2002 report an SNR of 28 dB, with values ????of H 31 dB, M 25 dB and L 16 dB. The -111 configuration also includes a dedicated pinout for the integrated PTT.
Key Features- FLX2 CH-3 Neckband Headset with PTT
- Yellow neckband variant with integrated PTT
- Newly designed speaker and microphone
- Slim design and bright yellow for high visibility
- FLX2 6-pin mini XLR connector
- 150 Ohm dynamic noise cancelling microphone
- IP68 microphone protection up to 6 m for 30 minutes
- 46 mm diameter speaker, 230 Ohm plus or minus 10%, IP54
- SNR attenuation of 28 dB, H 31 dB, M 25 dB, L 16 dB
- Suitable for noisy environments and for operators who need to remain connected to portable systems or fixed
CH-3 FLX2 Helmet Headset
The 3M Peltor CH-3 FLX2 yellow helmet-mounted earmuff is designed to take hearing protection and communication in noisy environments to a new level of performance. The data sheet describes a newly designed speaker and microphone, a slim cup design, and a bright yellow color for improved visibility.
3M Peltor identifies the MT74H52P3E-110 helmet-mounted variant of the CH-3 FLX2 series. The product features a removable down lead connector for high flexibility, an external jack for communication with external devices, and a noise-cancelling boom microphone for clear voice transmission.
Specifications include a 6-pin FLX2 mini XLR connector, a 46 mm diameter speaker with an impedance of 230 Ohms plus or minus 10%, a frequency response of 100 Hz to 8000 Hz, and IP54 protection. The dynamic noise-cancelling microphone has an impedance of 150 Ohm, IP68 protection up to 6 m for 30 minutes and a frequency response of 200 Hz to 7 kHz.
The data sheet also reports for the MT74H52P3E-110 model an SNR attenuation of 30 dB according to EN352-3:2002, with values ??H 32 dB, M 28 dB and L 21 dB. 3M Peltor finally declares the product's conformity to the requirements for CE marking.
Main features- CH-3 FLX2 helmet earmuff, yellow
- Helmet version
- Newly designed speaker and microphone
- Slim design and high-visibility yellow color
- Removable down lead connector for high flexibility
- External jack for communication with external devices
- Noise-cancelling boom microphone for clear speech
- FLX2 mini XLR 6-pin connector
- 46 mm diameter speaker, 230 Ohm plus or minus 10%, IP54
- 150 Ohm dynamic microphone with IP68 protection
- SNR attenuation of 30 dB, H 32 dB, M 28 dB, L 21 dB
- Compliance to the requirements for CE marking
CH-3 FLX2 Helmet Headset with PTT
The 3M Peltor CH-3 FLX2 helmet-mounted headset with PTT is designed to take hearing protection and communication in noisy environments to a new level of performance. The documentation describes a newly designed speaker and microphone, a slim cup design, and a bright yellow color for improved visibility.
For the part number MT74H52P3E-111, 3M Peltor identifies the helmet-mounted headset variant with integrated PTT of the CH-3 FLX2 series. The product is suitable for noisy work environments, such as pulp and paper, construction, airports, and other settings where workers must remain connected to portable or fixed systems throughout the day.
Specifications include a 6-pin FLX2 mini XLR connector, a 46 mm diameter speaker with an impedance of 230 Ohms plus or minus 10%, a frequency response of 100 Hz to 8000 Hz, and IP54 protection. The noise-cancelling microphone is a 150 Ohm dynamic type, with IP68 protection up to 6 m for 30 minutes and a frequency response of 200 Hz to 7 kHz.
For the MT74H52P3E-111 variant, laboratory attenuation data according to EN352-3:2002 report an SNR of 30 dB, with values ????of H 32 dB, M 28 dB and L 21 dB. The card also highlights a removable connector for high flexibility and compatibility with dedicated configurations of the CH-3 FLX2 range.
Key Features- 3M Peltor CH-3 FLX2 Helmet Headset with PTT
- Helmet variant with integrated PTT, yellow colour
- Newly designed speaker and microphone
- Slim design and bright yellow colour for high visibility
- Removable down lead connector for high flexibility
- 150 Ohm dynamic noise cancelling microphone
- IP68 microphone protection up to 6 m for 30 minutes
- 46 mm diameter speaker, 230 Ohm plus or minus 10%, IP54
- SNR attenuation of 30 dB, H 32 dB, M 28 dB, L 21 dB
- Suitable for noisy environments and for operators connected to portable or fixed systems
Wired noise cancelling headphones
3M Peltor wired mechanic's earmuffs are designed for aviation maintenance and ground support operations. The wired connection via a molded aircraft connector allows for direct connection to the aircraft and immediate communication with the cabin crew.
The high-attenuation earcups with optimized acoustic design provide excellent noise protection and a comfortable fit. The noise-compensating differential dynamic microphone, combined with the integrated PTT button on the earcup, ensures clear operational communications even in very noisy environments.Key Features
- High-attenuation earcups with optimized acoustic design
- Effective noise-compensating differential dynamic microphone
- Integrated microphone boom
- Integrated PTT button on the earcup
- Molded aircraft connector for direct connection to the aircraft
Ground Mechanic Headset with PTT
The 3M Peltor Ground Mechanic Headset with PTT is designed for communication between the ground and the aircraft cockpit. This noise-cancelling headset is reportedly designed to improve sound quality and comfort, even in very noisy environments, thanks to its optimized acoustic design and generous earcups.
The product features a dynamic differential microphone with excellent ambient noise compensation and a built-in microphone amplifier. The integrated microphone boom can be quickly positioned for easy handling, while the large, soft foam construction, fluid-filled sealing rings, and a stainless steel headband provide even pressure around the ears and long-lasting comfort.
The beam-mounted transducers are claimed to be designed to minimize resonance and distortion, providing excellent sound reproduction. The standard J11 connection of the TP-120 completes a package designed for operational communications in the aviation sector.
Main Features
- Special headset for communication between the ground and the aircraft cockpit
- Noise-reducing type
- Optimized acoustic design with high attenuation cups
- Excellent ear space for improved sound quality and comfort
- Dynamic differential microphone with ambient noise compensation
- Built-in microphone amplifier
- Integrated, quickly adjustable microphone boom
- Soft, wide foam with fluid-filled sealing rings
- Stainless steel headband for even pressure around the ears
- Standard J11 connection of the TP-120
- Beam-mounted earphones for less resonance and distortion
CRPS 600W AC for cnMatrix switches
The CRPS 600W AC power supply for cnMatrix switches is a removable power supply designed to ensure continuity and reliability for compatible cnMatrix series switches. With a total power output of 600W and a PoE budget of up to 500W, it efficiently supports network-powered devices.
Designed for integration with the EX2052R-P, TX2012R-P, TX2020R-P, and TX2020RF-P switches, this power supply module from Cambium Networks is an ideal solution for professional environments requiring scalability and easy replacement. The AC version does not include a power cord. Main Features
- CRPS AC Power Supply
- Total Power 600 W
- PoE Budget up to 500 W
- Compatible with EX2052R-P, TX2012R-P, TX2020R-P, and TX2020RF-P
- AC Power Cord Not Included
CRPS 930W AC for cnMatrix switches
The CRPS 930W AC power supply for cnMatrix switches is a removable power supply designed to ensure continuity and reliability for compatible cnMatrix series switches. With a total power output of 930W and a PoE budget of up to 840W, it efficiently supports network-powered devices.
Designed for integration with the EX2052R-P, TX2012R-P, TX2020R-P, and TX2020RF-P switches, this power supply module from Cambium Networks is an ideal solution for professional environments requiring scalability and easy replacement. The AC version does not include a power cord. Main Features
- CRPS AC Power Supply
- Total Power 930 W
- PoE Budget up to 840 W
- Compatible with EX2052R-P, TX2012R-P, TX2020R-P, and TX2020RF-P
- AC Power Cord Not Included