AikomGo April Promo: free shipping

The PRO‑PM2‑2/70‑25W bidirectional power monitor is designed to accurately monitor RF signals from 140 to 470MHz at up to 25W. It generates a DC voltage output proportional to the input power, calibrated to approximately 6V ±0.5V at 470MHz.

Thanks to its very low insertion loss (typical ≤0.1dB, max 0.3dB) and good impedance matching (VSWR <1.25:1), it can be integrated without altering the performance of the RF system. It features female N connectors, a compact and rugged design, and is suitable for professional environments where continuous and reliable monitoring of transmitted power is required. Main Features

• Operating Band 140–470MHz
• Input Power Up to 25W
• DC Output Approx. 6V ±0.5V at 470MHz
• Insertion Loss ≤0.3dB (Typical ≤0.1dB)
• Impedance 50Ω, VSWR <1.25:1
• Female N Connectors
• Dimensions 90×39.5×28mm
• Weight Approx. 0.15kg
• Operating Temperature –30°C to +60°C

The Amphenol Procom PRO RPS 2 N splitter is designed to split RF signals into two outputs over a wide frequency range from 50 to 1000 MHz. Ideal for shared reception applications, it enables efficient signal distribution while maintaining high loss and isolation performance.

It supports up to 2W of input power, with insertion loss less than 4.2 dB and isolation between outputs greater than 20 dB. The device has an impedance of 50?, VSWR <1.3:1 and N female connections. The compact and robust construction (99 x 39 x 28mm, weight 0.15kg) makes it suitable for installations even in limited spaces.

• Operating band: 50-1000MHz
• Number of ways: 2
• Maximum input power: 2W
• Insertion loss: <4.2dB
• Isolation between outputs: >20dB
• VSWR: <1.3:1
• Impedance: 50?
• Connections: N female
• Dimensions: 99 x 39 x 28mm
• Weight: approx. 0.15kg
• Operating temperature: -30°C à· +60°C
• Mounting: 4 holes Ø3.2mm

The Amphenol Procom PRO TAP88 5850 10dB 4.3/10(f) multiband tapper is ideal for integration into DAS systems and wideband RF networks (88-5850MHz). With a fixed 10dB coupling, it allows a portion of the RF signal to be extracted without compromising the quality of the main line.

Designed to handle up to 500W of input power, it offers low insertion loss and maintains balanced VSWR values across the entire frequency range. Passive intermodulation is kept to ‰¤-153dBc, ensuring high performance even in sensitive environments. Equipped with a 4.3-10 female connector, integrated mounting brackets and IP67 certification, it is perfect for indoor or outdoor installations with high robustness.

• Operating Band: 88-5850MHz
• Coupling Factor: 10dB
• Maximum Input Power: 500W
• Insertion Loss: Low across the entire band (specifications available)
• VSWR: With proper symmetry on all ports
• Passive Intermodulation: ‰¤-153dBc (2x43dBm)
• Impedance: 50?
• Connection: 4.3-10 female
• Mounting: Brackets with Ø6.5mm hole
• Protection: IP67; operating temperature -30°C à· +60°C
• Dimensions: approximately 167x32x62mm; weight ~0.51kg

The Amphenol-Procom PRO-TAP 88-5850-6dB multiband tapper is designed for professional applications in DAS systems or distributed networks, with fixed 6dB coupling across the entire 88 to 5850MHz band. It allows for the controlled derivation of RF signals from the main line, maintaining high performance even in the presence of multiple operating bands.

It supports up to 500W, with low insertion loss and excellent impedance symmetry. The N female connections ensure compatibility with standard infrastructures. The robust structure is IP67 certified and equipped with brackets for quick mounting. Passive intermodulation of less than -153dBc makes it ideal for sensitive RF environments.

• Operating Band: 88-5850MHz
• Coupling Factor: 6dB
• Maximum Input Power: 500W
• Insertion Loss: ‰¤1.90dB (up to 1550MHz); meets specifications for higher frequencies
• VSWR: ‰¤1.50:1 (up to 1550MHz); ‰¤1.80:1 (up to 5850MHz)
• Impedance: 50?
• Passive intermodulation: ‰¤-153dBc (2x43dBm)
• Connections: N female
• Mounting: brackets with Ø6.5mm hole
• Protection: IP67
• Operating temperature: -30°C à· +60°C
• Dimensions: 167x32x62mm; weight: approx. 0.51kg

The PS Wall 240 VAC Universal Euro Adapter is a convenient solution for powering and charging compatible radio devices. Developed by Motorola, it offers a stable 5 VDC 1.5 A output and features a removable USB A connector, ideal for use in professional environments with European power supplies.

Declared compatibility with the WAVE PTX TLK 25 and TLK 110 devices makes it suitable for operational environments that require reliability and ease of use.

Main Features

• 240 VAC input with European standard
• 5 VDC 1.5 A output
• Removable USB A connector
• Compatible with TLK 25 and TLK 110 radios

The 12 Vdc-230 Vac 1000 VA DC-AC inverter is designed to transform 12 Vdc power into 230 Vac 50 Hz alternating current, allowing high-power devices to be used on the move or in the absence of a power grid. With a power of 1000 VA, it is the ideal solution for powering motors, pumps, and refrigerators, making it perfect for campers, boats, and remote installations.

The soft start system reduces initial current peaks, thus protecting connected appliances and prolonging their lifespan. Furthermore, the device integrates a complete set of electronic protections to ensure safety and continuity of service even in harsh conditions.Main Features

• 12 Vdc input (11-14.5 V)
• 230 Vac 50 Hz output
• 1000 VA rated power
• Soft start system for controlled start-up
• Protections: reverse polarity, overload, overtemperature, low battery shutdown

The 24 Vdc-230 Vac 1000 VA DC-AC inverter is designed to transform 24 Vdc direct voltage into 230 Vac 50 Hz alternating current, allowing the use of high-power devices even in the absence of a mains power supply. With a power of 1000 VA, it is a reliable choice for powering pumps, electric motors, and refrigerators, making it perfect for campers, boats, and off-grid installations.

The soft start system ensures a gradual start-up, reducing initial current peaks and extending the life of the connected devices. The inverter is also equipped with a complete set of electronic protections, ensuring maximum safety and operational continuity even under demanding operating conditions.Main Features

• 24 Vdc input (23-30 V)
• 230 Vac 50 Hz output
• 1000 VA rated power
• Soft start system for controlled start-up
• Protections: reverse polarity, overload, overtemperature, low battery shutdown

The Avigilon ENVR2 PLUS Replacement Power Supply is an accessory for ENVR2 series appliances, designed for power replacement or restoration in existing installations. Using a genuine Avigilon component ensures proper power supply to the device and maintains the system's expected performance.

The product is supplied without a power cord and is suitable for professional environments where cabling is already present or managed separately. It is an ideal solution for technical support, scheduled maintenance, or spare parts management.

Key Features

• Genuine Avigilon replacement power supply
• Compatible with ENVR2 PLUS appliances
• Supplied without a power cord
• Suitable for maintenance and hardware replacement

The 13.5 Vdc 10 A linear power supply is a professional device designed to provide stable and safe power to telecommunications systems and sensitive electronic applications. Thanks to linear technology, it ensures operation free from radio interference, a fundamental feature for use in radio and critical equipment.

With a maximum power of 10 A and a continuous output of 6-7 A (95% duty cycle), the PT 110A model offers great reliability in continuous service. The low typical ripple of 20 mV ensures superior power quality, minimizing interference.

Compact and robust, it features protection against overload, permanent short circuit and overvoltage, with automatic shutdown in the event of a fault. Natural ventilation, without fans, for silent and long-lasting operation.Main Features

• Output 13.5 Vdc - 10 A max (6-7 A continuous)
• Typical RMS ripple: 20 mV
• High immunity to mains lightning strikes
• Protection against overload, short circuit, and overvoltage
• Natural ventilation, silent and maintenance-free
• Dimensions: 185 x 260 x 110 mm
• Weight: 5 kg

The 13.5 Vdc 14 A linear power supply with internal battery is a complete solution for telecommunications applications and professional systems that require absolute continuity of service. It is equipped with an integrated 12 V 7 Ah buffer battery, which ensures operation even in the event of a power failure, with automatic recharging at constant current and voltage.

Thanks to linear technology, the PT 114A model guarantees the absence of radio interference, making it ideal for transceivers and sensitive devices. It is protected against overloads, overvoltages, and permanent short circuits, with excellent immunity to mains lightning strikes.

Compact, robust, and silent thanks to natural ventilation, it offers long operating life with over 15 years of estimated reliability, making it the ideal choice for professional and critical applications.

• Output 13.5 Vdc - 14 A max
• Internal battery 12 V 7 Ah
• Maximum continuous load 10-12 A
• Automatic battery charger with constant current and voltage
• Typical RMS ripple: 20 mV
• Protection against overloads, overvoltages, and short circuits
• High immunity to mains lightning strikes
• Natural ventilation and silent operation
• Dimensions: 185 x 260 x 110 mm
• Weight: 6 kg

The 13.5 Vdc 20 A linear power supply is designed to provide stable, noise-free power to telecommunications systems and professional electronic devices. Featuring highly reliable linear technology, it guarantees low ripple and excellent load stability, essential qualities for transceivers and sensitive instruments.

The PT 120 model delivers up to 20 A continuously, maintaining high performance even under heavy use. The compact and robust design, combined with fanless natural ventilation, ensures quiet operation and a long, maintenance-free life.

Thanks to integrated protection against overload, permanent short circuit, and output overvoltage, it represents a safe and reliable solution for professional and critical applications.

• 13.5 Vdc - 20 A output
• Radio-interference-free linear technology
• Low ripple and high load stability
• Protection against overload, overvoltage, and short circuit
• Natural ventilation, quiet operation
• Dimensions: 200 x 290 x 130 mm

The 13.5 Vdc 35 A linear power supply is designed to ensure high performance and long-term reliability. Thanks to its linear technology, it eliminates any radio interference emissions, a key feature for use in telecommunications and sensitive professional electronics applications.

The PT 135A model delivers up to 35 A nominal (50% duty cycle) with a stable 13.5 Vdc voltage, maintaining low ripple and high load stability. It is equipped with a special high-isolation input transformer, making it highly resistant to atmospheric discharges and mains disturbances.

Its integrated protections include overload, permanent short circuit, and overvoltage, with automatic output shutdown in the event of a fault due to lightning strikes. The fanless design ensures completely silent operation, while the robust, certified construction (CE, EMC, LVD, RoHS) ensures long-lasting operation even in harsh conditions.Main Features

• 13.5 Vdc output - 35 A nominal (50% duty cycle)
• Linear technology with total absence of radio interference
• Low ripple and high load stability
• Protection against overload, permanent short circuit, and overvoltage
• Special high-isolation input transformer
• Excellent immunity to mains lightning strikes
• Fanless, silent operation
• Dimensions: 185 x 300 x 160 mm
• Certifications: CE, EMC 2014/30/EU, LVD 2014/35/EU, RoHS