Cambium Networks Promo
Valid until December 31, 2026
Offer valid while stocks last.
2.4 5 6 GHz 5 dBi 1x1 omnidirectional antenna
Designed for commercial and industrial network applications, this tri-band omnidirectional antenna from Cambium Networks operates on the 2.4 GHz, 5 GHz, and 6 GHz frequencies. The 1x1 configuration, male N connector, and linear polarization facilitate integration and help maintain stable signal quality.
The design is designed to operate at temperatures ranging from -40°C to 85°C, offering reliability even in extreme environmental conditions. Each access point can support up to 6 antennas.
Key Features
- Omnidirectional coverage
- Tri-band support on 2.4 GHz, 5 GHz, and 6 GHz frequencies
- 1x1 antenna configuration
- Nominal gain of 5 dBi
- 4.4 dBi gain at 2.4 GHz
- 5.5 dBi gain at 5 GHz and 6 GHz
- Single male N connector
- Linear polarization
- Supports up to 6 antennas per access point
- Operating temperature range of -40°C to 85°C
- Dimensions of 8 x 2 x 0.5 inches
- Weight of 0.5 lb
Cat6 Flat Ethernet Cable 50mm
The Cambium Networks 50mm Flat Cat6 Ethernet Cable is an optional short jumper designed to connect the cnPilot e430H and e430W access points. The compact size allows you to make the Ethernet connection with a dedicated cable to compatible devices.
Key Features
- Flat Cat6 Ethernet Cable
- 50mm Length
- Short Jumper Format
- Optional Accessory
- Compatible with cnPilot e430H and e430W access points
Adjustable Angle Bracket for X7 Access Point
The Cambium Networks X7 Adjustable Angle Access Point Bracket is a mounting accessory compatible with the X7 Series Enterprise Access Points. The articulating design allows you to orient the access point up to 60 degrees in either direction, with 2-degree adjustment accuracy, without requiring additional tools.
Key Features
- Compatible with the X7 Series Enterprise Access Points
- Up to 60 degrees in either direction
- 2-degree adjustment accuracy
- Adjustable articulating design
- Adjustment without additional tools
CRPS DC 1200W power supply for cnMatrix switches
The Cambium Networks 1200W CRPS DC Power Supply for cnMatrix Switches supports an input voltage range of 36 to 72V. The available PoE budget varies by voltage, with 740W at 36 to 47V and 960W at 48 to 72V. A software-configurable high-temperature mode provides 700W. The power cord is not included.
Key Features
- CRPS DC Power Supply for cnMatrix Switches
- 1200W total power
- 36 to 72V input voltage
- 740W PoE budget at 36 to 47V input
- 960W PoE budget at 48 to 72V input
- Power budget 700 W in high-temperature mode
- Software-configurable high-temperature mode
- Power cord not included
CRPS DC 600W power supply for cnMatrix switches
The Cambium Networks 600W CRPS DC Power Supply for cnMatrix Switches operates from an input voltage of 36 to 72 V. It provides a 500W PoE budget in normal mode at both 36 to 47 V and 48 to 72 V. The software-configurable high-temperature mode provides a 450W budget.
Key Features
- CRPS DC Power Supply for cnMatrix Switches
- 600W Power
- 36 to 72 V Input Voltage
- 500W PoE budget in normal mode
- 450W PoE budget in high-temperature mode
- Software-configurable high-temperature mode
CRPS DC 930W power supply for cnMatrix switches
The Cambium Networks 930W CRPS DC Power Supply for cnMatrix Switches supports an input voltage of 36 to 72V. The available PoE budget varies by voltage, reaching 740W with an input of 36 to 47V and 840W with an input of 48 to 72V. The software-configurable high-temperature mode provides a PoE budget of 600W.
Key Features
- CRPS DC Power Supply for cnMatrix Switches
- 930W Power
- Input Voltage of 36 to 72V
- 740W PoE budget with 36 to 47V input
- 840W PoE budget with 48 to 72V input
- 840W PoE budget 600 W in high-temperature mode
- Software-configurable high-temperature mode
cnMatrix EX1010P switch 8 PoE+ 2 SFP ports
The Cambium Networks cnMatrix EX1010P, model MX-EX1010PxA-E, is an enterprise managed switch designed for scalable, high-performance networks. It features 8 Gigabit Ethernet ports with PoE+ support up to 30W per port (maximum budget 120W), ideal for directly powering access points, IP cameras, and VoIP phones, as well as 2 Gigabit SFP uplinks for fiber connections.
With advanced Layer 2 features and native integration with cnMaestro, the switch enables centralized configuration, monitoring, and management in the cloud or on-premises. Policy-based automation simplifies network administration, reducing setup time and operating costs. Designed with high standards of reliability and security, the EX1010P is suitable for deployment in enterprise, education, hospitality, and service provider environments.
Key Features- 8 Gigabit Ethernet PoE+ ports (up to 30W per port, 120W budget)
- 2 Gigabit SFP uplink ports
- Advanced Layer 2 Management
- Policy-based Automation
- Full integration with cnMaestro
- Enterprise security and resiliency protocols
- Compact and reliable design for professional scenarios
cnMatrix EX1010 switch 8 Gigabit 2 SFP ports
The Cambium Networks cnMatrix EX1010, model MX-EX1010xxA-E, is an enterprise managed switch designed for high-performance professional networks. Featuring 8 Gigabit Ethernet ports and 2 SFP uplinks for fiber connections, it ensures flexibility and reliability in enterprise, education, hospitality, and service provider scenarios.
The switch integrates advanced Layer 2 features, policy-based automation, and centralized management via cnMaestro (cloud or on-premise), simplifying network administration. Unlike the EX1010P, it does not include PoE power, making it ideal for environments where devices are already powered separately. With its compact and rugged design, it ensures efficiency, security and stability.
Key Features- 8 Gigabit Ethernet ports
- 2 Gigabit SFP uplink ports
- Advanced Layer 2 management
- Policy-based automation
- Full integration with cnMaestro
- Enterprise security and resilience protocols
- Compact design for professional installations
cnMatrix EX1028-P switch 24 gigabit PoE+ L2 ports
The cnMatrix switch range is dedicated to the enterprise sector and effectively meets the complex needs of modern mixed fiber/wireless networks with unique features that differentiate cnMatrix switches from the competition. It is compatible with the Wi-Fi 6/802.11ax standard, and the PoE+ ports can handle PoE devices requiring up to 60W of power. The cnMatrix EX1028-P switch guarantees 56 Gbps of throughput and has 24 ports.
With cnMatrix switches, Cambium Networks aims to provide a unified, reliable, and affordable access network. The cnMatrix range is built on the Intelligent Edge concept, a set of highly sophisticated features (policy-based, zero-touch, dynamic configuration, enhanced security) that allows the network manager to monitor all devices in the network thanks to cnMaestro's unified cloud-based management. The same features can also be managed on-premises.
The cnMatrix enterprise switches offer many important features.
Automated policy-based management: Ability to configure devices and automatically configure switch ports based on the policy defined for the device type.
High security with network segmentation: Provides a high-performance security environment for critical network resources, automatically placing devices in the most appropriate network segment based on their profile.
Wireless Aware: Enables policy automation, easy monitoring, and troubleshooting across a uniformly managed wired and wireless network.
Site Survivability: Duplicated operating parameters locally enable full operation even in the event of a loss of cloud connectivity.
Cloud-based management with no subscription costs: The free cnMaestro cloud-based management platform ensures complete lifecycle management, configuration, and control. and security services.
Management via XMS-Cloud: Massively scalable, multi-tenant platform, extremely easy to use, virtually eliminating on-site system maintenance.
Enterprise with Layer 3 capabilities: cnMatrix provides a rich set of Layer 2 switching features enhanced with a complete set of Layer 3 features (static and dynamic routing) often required at the edge network.
.jpg?d=300x300)
cnMatrix EX1028-P switch 24 gigabit PoE+ L2 ports
The cnMatrix switch range is dedicated to the enterprise sector and effectively meets the complex needs of modern mixed fiber/wireless networks with unique features that differentiate cnMatrix switches from the competition. It is compatible with the Wi-Fi 6/802.11ax standard, and the PoE+ ports can handle PoE devices requiring up to 60W of power. The cnMatrix EX1028-P switch guarantees 56 Gbps of throughput and has 24 ports.
With cnMatrix switches, Cambium Networks aims to provide a unified, reliable, and affordable access network. The cnMatrix range is built on the Intelligent Edge concept, a set of highly sophisticated features (policy-based, zero-touch, dynamic configuration, enhanced security) that allows the network manager to monitor all devices in the network thanks to cnMaestro's unified cloud-based management. The same features can also be managed on-premises.
The cnMatrix enterprise switches offer many important features.
Automated policy-based management: Ability to configure devices and automatically configure switch ports based on the policy defined for the device type.
High security with network segmentation: Provides a high-performance security environment for critical network resources, automatically placing devices in the most appropriate network segment based on their profile.
Wireless Aware: Enables policy automation, easy monitoring, and troubleshooting across a uniformly managed wired and wireless network.
Site Survivability: Duplicated operating parameters locally enable full operation even in the event of a loss of cloud connectivity.
Cloud-based management with no subscription costs: The free cnMaestro cloud-based management platform ensures complete lifecycle management, configuration, and control. and security services.
Management via XMS-Cloud: Massively scalable, multi-tenant platform, extremely easy to use, virtually eliminating on-site system maintenance.
Enterprise with Layer 3 capabilities: cnMatrix provides a rich set of Layer 2 switching features enhanced with a complete set of Layer 3 features (static and dynamic routing) often required at the edge network.
cnMatrix EX2010P switch 8 PoE+ 2 SFP+ ports
The Cambium Networks cnMatrix EX2010P, model MX-EX2010PXA-0, is a second-generation enterprise switch that combines high performance with simplified management. It features 8 Gigabit Ethernet PoE+ ports with up to 30W per port (maximum budget 240W), ideal for directly powering Wi-Fi access points, IP cameras, and VoIP phones, as well as 2 1/10GbE SFP+ uplinks for fiber connectivity.
The cnMatrix EX2000 series introduces advanced features such as policy-based automation, integrated security, and comprehensive management via cnMaestro (cloud and on-premise). With Layer 2 and Layer 3 Lite support, the switch ensures operational efficiency, scalability, and reduced management costs. Designed for enterprise, education, hospitality, and provider environments, it ensures reliability and performance even in complex network scenarios.
Key Features- 8 Gigabit Ethernet PoE+ ports up to 30 W per port
- 2 1/10 GbE SFP+ uplink ports
- Total PoE budget: 240 W
- Switching fabric up to 56 Gbps
- Layer 2 and Layer 3 Lite
- Policy-based automation
- Centralized management via cnMaestro
- Designed for enterprise and provider scenarios
cnMatrix EX2010P switch 8 PoE+ 2 SFP+ ports
The Cambium Networks cnMatrix EX2010P, model MX-EX2010PXA-0, is a second-generation enterprise switch that combines high performance with simplified management. It features 8 Gigabit Ethernet PoE+ ports with up to 30W per port (maximum budget 240W), ideal for directly powering Wi-Fi access points, IP cameras, and VoIP phones, as well as 2 1/10GbE SFP+ uplinks for fiber connectivity.
The cnMatrix EX2000 series introduces advanced features such as policy-based automation, integrated security, and comprehensive management via cnMaestro (cloud and on-premise). With Layer 2 and Layer 3 Lite support, the switch ensures operational efficiency, scalability, and reduced management costs. Designed for enterprise, education, hospitality, and provider environments, it ensures reliability and performance even in complex network scenarios.
Key Features- 8 Gigabit Ethernet PoE+ ports up to 30 W per port
- 2 1/10 GbE SFP+ uplink ports
- Total PoE budget: 240 W
- Switching fabric up to 56 Gbps
- Layer 2 and Layer 3 Lite
- Policy-based automation
- Centralized management via cnMaestro
- Designed for enterprise and provider scenarios